Honeywell RS-232 User manual

INSTALLATION

INSTRUCTIONS RS-232 Interface /

SerialPrinterPort

K1148-X 4/98

1 2 3 4 5 6 7 8

Figure1:Connector

RJ-45

FemaleDB-9 Back view

21345 6789

Pin DCE DTE

1 DCD DCD

2 RXD TXD

3 TXD RXD

4 DSR DTR

5 GND GND

6 DTR DSR

7 RTS CTS

8 CTS RTS

Figure 3: Signal Lines: Interface RJ-45 connector

Bl R G O Bk Y Gy/Wh Br

Figure 2: Signal Lines (Female DB-9 Front view)

Pin DCE DTE

1 DCD DCD

2 RXD TXD

3 TXD RXD

4 DSR DTR

5 GND GND

6 DTR DSR

7 RTS CTS

8 CTS RTS

Wire colors from RJ-45

Install crimp pins in matching

DB-9 locations as shown on

the left.

21345

6789 NOTE: Location 9 on DB-9 is empty.

The hardware in this package provides an RS-232 interface to a Destiny control panel (model Des-

tiny 6100, software version 8.04 or later). The interface can be used to provide 2-way communica-

tion with a personal computer, Remote System Mode with an RS-232 equipped controller, or to send

a real-time log of system events to a serial printer.

NOTE: Observe the drawing

and the connector used and

verify the color codes are

equivalent.

Serial Printers:

If your serial printer requires a

male 9 or 25 pin connector, you

can get a gender changer at an

electronics store. Destiny 6100

panel software supports only

GND, TXD, and RXD control

lines. Some printers require

additional control lines. You

may need to jumper these control

lines in order to use such print-

ers. Consult your printer manual

for further information.

Signal Lines:

Figure 2 shows the configuration

of signal lines in the RJ-45/DB-9

converter when wired as shown

in Figure 1. Pin 1 for the RJ-45

connector (J4) is closest to the

top of the board. Figure 3 shows

the signal lines used in a custom

installation with a DB-9 connec-

tor at J1 on the RS-232 board.

The signal lines listed on the RS-

232 Board pertain to this custom

installation, not to the standard

RJ-45.

Downloaded from - http://www.guardianalarms.net

Cable:

TheRS-232 interfaceis attachedto aRJ-45 to

DB-9 connector with either a 4 conductor or 8

conductor “phone” cable. The cable is NOT pin

compatiblewithstandard4conductorphonecords.

See Figure 2: Connection Cable. For a

4 conductor cable only pins 3,4,5,6 on the RJ-45

connector will be used. As of software revision

8.04 only pins 3,4,5,6 are supported eliminating

the necessity for 8 conductor connections.

DTE vs. DCE:

TheRS-232interfacecanoperateineitherDateTerminalEquipment(DTE)orDataCommunicationEquipment

(DCE)mode. A jumper (J3)is located tothe right ofthe RJ-45 ontheinterface board. Attachthesupplied

jumperacrossthe centerandbottompin forDCEoperationor thetoptwopins forDTE. Mostapplications

will require DCE including connection to a PC and a printer.

Protocol:

The2-wayRS-232standardfortheDestinycontrol

panelisanopenstandardandisavailablebycalling

TechnicalSupport at 800-272-7937.

Printer Reports:

When enabled (as described in Programming, above), any event programmed to appear in the Event

Memory Log will be printed when an event occurs. All items in the system that can be sent to a central

station will be printed as the event occurs. The “Report to Central Station” programming option does

not affect the printer report.

Note: the RS-232 does not buffer events, if a printer is off-line the event will not be printed.

4 Conductor Cable: Top View

8 Conductor Cable: Top View

Figure 2: Connection Cable

Br Bl Y G R Bk O Gy Br Bl Y G R Bk O Gy

YGRBkYGRBk

Programming:

The following programming options are provided:

001 - Enable the RS-232 adapter

002 - Enable printer compatibility

004 - Use English Line text (for printers only)

008 - Enable 2-Way RS-232 communication (for PC connections)

064 - Enable Remote System Mode

Place the system into program mode (default: 9,1,7,3), enter location 0,1,5,5 and then enter the sum of

options to be enabled. For example, to enable 2-way communication, enter 0,0,9 (001 + 008). For

printing, enter 0,0,7 (001 + 002 + 004).

Format:

The following is an example of the printer output when connected to the RS-232 port.

Event User Time Month Day

Open - System Disarmed User = 01 13:23 July 29

This manual suits for next models

Table of contents

Other Honeywell Control Panel manuals

Honeywell

Honeywell ENVIRAZONE PANEL W8835 Operation manual

Honeywell

Honeywell SILENT KNIGHT 6700 User manual

Honeywell

Honeywell Galaxy Dimension GD-48 User manual

Honeywell

Honeywell Galaxy 18Galaxy Owner's manual

Honeywell

Honeywell Lynx Touch L5100 Installation guide

Honeywell

Honeywell Galaxy 16 User manual

Honeywell

Honeywell Fire-Lite Alarms MS-9600LS User manual

Honeywell

Honeywell HCM 200 User manual

Honeywell

Honeywell GALAXY 16103 User manual

Honeywell

Honeywell THOR VM1 User manual

Honeywell

Honeywell TrueZONE HZ432 User manual

Honeywell

Honeywell NOTIFIER NFW-100X User manual

Honeywell

Honeywell NOTIFIER ID62 Instruction sheet

Honeywell

Honeywell AQ25A Series User manual

Honeywell

Honeywell Galaxy 2-44+ User manual

Honeywell

Honeywell Notifier AFP-100 User manual

Honeywell

Honeywell PC8900A User manual

Honeywell

Honeywell Gamewell Flex 402 User manual

Honeywell

Honeywell Fire-Lite Alarms ES-200X User manual

Honeywell

Honeywell Excel 5000 System Series User manual

Honeywell

Honeywell MiniZone EMM-3U Operation manual

Honeywell

Honeywell Fire-lite ECC-LOC User manual

Honeywell

Honeywell Notifier NFS-320 User manual

Honeywell

Honeywell Galaxy Dimension series Quick setup guide

Popular Control Panel manuals by other brands

RDZ

RDZ PC-HRX user manual

STG-BEIKIRCH

STG-BEIKIRCH MZ3 operation instruction

Efka

Efka Variocontrol V810 instruction manual

Cebora

Cebora 208-10 instruction manual

AMX

AMX AutoPatch CP-15 instruction manual

Satel

Satel CA-6 KLED-S user manual

Evolution

Evolution IQ plus 800 installation manual

Fagor

Fagor 8040 TCO CNC operating manual

Trane

Trane ComfortLink II XL950 Control user guide

AKO

AKO PROCool AKO-17635-2 quick guide

ABB

ABB 6136/30M-101 operating instructions

Telikou

Telikou BK-603 Belt Pack instruction manual

Mapei

Mapei Mapeheat Thermo Touch user guide

Bosch

Bosch D9412GV4 owner's manual

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries SC-SL4-AE2/1 user manual

Sminn

Sminn BOX L VF1L EI instruction manual

Balboa

Balboa TP600 user manual

Nice

Nice HSCU1 Instructions and warnings for installation and use