Homyeko AES023 User manual

ELECTRIC SPIN

SCRUBBER

USER GUIDE

MODEL: AES023

Made in China

Questions or Concerns?

support@homyeko.com https://www.homyeko.com

IMPORTANT SAFETY TIPS

Exploring Your Spin Scrubber

Assembling Your Spin Scrubber

Using Your Spin Scrubber

Care and Cleaning

Troubleshooting

Warranty and Service

CONTENTS

IMPORTANT SAFETY TIPS

SAVE THESE INSTRUCTIONS

READ ALL INSTRUCTIONS BEFORE USE AND SAVE FOR FUTURE REFERENCE

Make sure that the spin scrubber is well-assembled before use.

This appliance is not intended for use by persons (including children) with reduced physical, sensory

or mental capabilities, or lack of experience and knowledge, unless they have been given supervision

or instruction concerning the use of the appliance by person responsible for their safety.

To protect against the risk of electric shock, do not immerse the scrubber in water or other liquid. Do

not charge battery if it is wet or shows signs of corrosion.

If the charge cord is damaged, it must be replaced by the manufacturer or its service agent or similarly

qualified person in order to avoid a hazard.

DO NOT store or use the appliance near explosive and flammable objects or liquids.

DO NOT disassemble, repair or modify internal parts by yourself, please contact us if you have quality

problems.

DO NOT disassemble, repair, or try to open the battery. When charging, keep away from hot or

flammable objects.

DO NOT use other brush heads than the ones recommended by the manufacturer.

Always use proper eye protection when using the power scrubber with irritating substances. Rubber

gloves are also recommended.

Keep the hair, cloth or other parts of your body away from the brush head to avoid convolving.

Use the appliance only for intended household purposes as described in this User Guide.

Specifications

Exploring Your Spin Scrubber

Model NO.

Input

Power

Speed

Nosie

Battery capacity

Charging Time

N.W.

AES023

9V 0.65A Double Pins Port

14.8W

Low: 280 ± 10%RPM, High: 380 ± 10%RPM

≤ 70 ± 5dB

Li-ion 7.4V / 2500mAh

4.5 ± 0.5 Hours

1.00kg

Hanging Strap

Main Handle

Extension Release

Button

Length

Adjustment Buckle

Extension Handle

Brush Head

Hard Flat Brush

Dome Brush Small Flat Brush

Adapter

- 1 - - 2 -

Corner Brush

Electric Spin Scrubber x 1

Corner Brush x 2

Extension Rod x 1

Dome Brush x 1

Small Flat Brush x 1

Hook x 1

Power /

Mode Button

Extension

Release Button

Scrubber Head

Angle

Adjustment Switch

Hook

Indicator

Charging Port

Hard Flat Brush x 1

9V 0.65A Adapter x 1

User Guide x 1

Assembling Your Spin Scrubber Using Your Spin Scrubber

Make sure that the spin scrubber is turned oﬀ before assembling any part. Well-assem-

ble it before use.

• We highly recommend that you fully charge the Spin Scrubber before first use.

• Always make sure the charging port is dry before charging. Only connect to a 9V/0.65A

power adapter (included) for charging.

• Hang it oﬀ the floor aer using. To extend the lifespan of brush heads, it is recommended to

hang the scrubber with hook aer using.

• Clean with detergent. For better cleaning eﬀect, it is recommended to clean with detergent

(such as Mold & Mildew Removers, Water Stain Removers, All-Purpose Cleaner) for diﬀerent needs.

• Soak stubborn stains before cleaning. To easily remove stubborn stains, it is recommended to

soak stains in water and detergent for a while before cleaning.

• Protect eyes and hands when necessary. Always use proper eye protection when using the

scrubber with irritating substances. Rubber gloves are also recommended.

• Regularly replace the brush head. It is recommended to replace your brush head regularly to

achieve optimal results. Contact us for replacement brush head.

1. Connect Scrubber Head to Main Handle ( with or without the Extension Road assembled in the

middle) until it clicks into place.

2. Align and insert desired Brush Head into Scrubber head to lock into place.

TIPS & TRICKS

Dome BrushHard Flat Brush Small Flat Brush

Concave cleaning

brush for bathtub

or sink

For flat surfaces,

like tile floor, glass

or window

Corner Brush

For corners, edges,

tight places, even

wheels

For detail work

- 3 - - 4 -

Assemble to your needs

Click

Battery Status Indicator

Blinking Red -> Low Battery

Steady Red -> Charging

Blinking Green -> Motor Lock Protection

Steady Green -> Fully charged / Running

Power / Mode Button

Repeatedly press to cycle

through

ON (Low) → High → OFF.

45°

90°

Angle Adjustment

Slide the switch to adjust

brushing angle (0°, 45° or

90°).

The troubleshooting guide addresses the most common problems. If problems persist, feel free to

contact the Customer Support at support@homyeko.com.

Care and Cleaning Troubleshooting

• Store the scrubber in a ventilated and shade place. Avoid placing it in a damp place or

being exposed to strong sunlight.

• If you are not going to use the scrubber for an extended period of time, fully charge it and

charge at least once every three months.

• Check if the spin scrubber is in charging. It cannot work during charging.

• The spin scrubber may run out of battery or battery low, charge it promptly.

• You may press the brush head too hard and the scrubber stops automatically. To return to

normal status, hold the Power button to turn it on again.

Q: My spin scrubber does not work or stops working suddenly.

• Make sure the spin scrubber is fully charged with the included charging cable.

• Do not press the brush head too hard. The scrubber cannot last long when strong force is

applied.

Q: The battery of my spin scrubber is draining quickly.

• You may need to fully charge the spin scrubber.

• Select High working mode by repeatedly pressing the Power Button.

Q: My spin scrubber seems less powerful.

Gently wipe with a wrung so cloth.

Dry all parts and reassemble for

next use.

• Make sure the spin scrubber is properly charged with the included adapter

• Outlet is not working. Try a diﬀerent outlet to fully charge the spin scrubber.

Q: My spin scrubber does not charge.

• To check the LED indicator whether it was light up. If no, the unit can be turn on if there is

no power. Please recharge it before turning on;

• To check the indicator whether it was red color and flashing. The unit can’t be turned on if

it is in charging;

• If the unit stop working during the cleaning homework, please check the display whether

the battery is less than 5%. If LED indicator is flashing, please recharge the unit as soon as

possible;

• If the unit stop working during the cleaning homework and the battery capacity le is higher

than 5%, please turn oﬀ the unit cause the battery high temperature protection was triggered

and turn on the unit 30 mins later.

Q: Do not be turned on or stop working

Washable Handle Parts

Clean under tap water or soak with

neutral detergent for easy cleaning.

Hand Wash

- 5 - - 6 -

Thank you for choosing Homyeko Spin Scrubber. This product is covered with Homyeko product

and labor warranty for 12 months from the date of its original purchase.

Accident, misuse, or repairs performed by unauthorized personnel.

Any unit that has been tampered with or used for commercial purpose.

Normal wear and tear of wearable parts.

Use of force, damage caused by external influences.

Damage caused by non-observance of the User Manual, e.g. connection to an unsuitable mains

supply or non-compliance with the instructions.

Partially or completely dismantled appliances.

Defects caused by or resulting from damages from shipping or from repairs, service, or

alteration to the product or any of its parts that have been performed by a repair person not

authorized.

We can only provide aer sales service for products that are sold by authorized retailers and

distributors. If you have purchased from a diﬀerent place, please contact your seller for return and

warranty issues.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two

conditions: (1)this device may not cause harmful interference, and (2)this device must accept

any interference received, including interference that may cause undesired operation.

* Please have your invoice and order ID ready before contacting Customer Support at

support@homyeko.com.

The warranty will not apply in cases of:

FCC Compliance

Warranty and Service

To check the LED indicator whether it is flash when charging. If the indicator does not light up,

please plug, and unplug the adaptor.

Q: The battery cannot be get charged

To check the brush head whether it is in right position.

Q: The brush head drop oﬀ

If the unit stop working and the Green LED indicator flash in 1 Hz four times, the motor

locked protection was triggered. Please restart the unit and work normal.

Q: The brush head was overload then the motor was locked, and the unit stop

working.

- 7 -

Table of contents

Other Homyeko Scrubber manuals

Homyeko

Homyeko AES023 User manual

Popular Scrubber manuals by other brands

Olympus

Olympus M200H operating manual

Clarke

Clarke BEXT 100H Operation?and safety

JOHNY VAC

JOHNY VAC JVC70BCT user guide

RCm

RCm Elan Series Instruction and maintenance handbook

Kärcher

Kärcher B 120 W quick start

Truvox

Truvox Orbis MotorScrubber 20 user manual

Numatic

Numatic TTB 4045/100 Original instructions

U.S. Products

U.S. Products PEX 500-C-TICK Information & operating instructions

Mclennan

Mclennan C510 Operator's manual

Tennant

Tennant T20 LPG Operator's manual

Columbus

Columbus ARA 66 BM 100 operating manual

Numatic

Numatic TTV 678G / 300T Owner's instructions

American-Lincoln

American-Lincoln 505-945 Instructions for use

FIORENTINI

FIORENTINI ET 65-75 user manual

Floorpul

Floorpul ruby 48 blt Use and maintenance

Onyx

Onyx RX-34 Operator's manual

Dustbane

Dustbane Hurricane 400 Operation manual

Sana

Sana EUJ-702 user manual