Hobo MicroRX RX210 Series Instruction Manual
Installing a Micro SIM Card in a HOBO® MicroRX (RX210x) Station
23845-E
Requirements:
•HOBO RX2100 MicroRX Station
•USB cable
•One of the following:
HOBOconnect version 1.5 or higher
or
HOBOware® version 3.7.23 or earlier
•User-provided data plan and SIM requirements:
Micro SIM for 4G LTE Network; supports UMTS/HSPA+ at 800, 850, 900, 1800, 1900, or 2100 MHz and LTE at 700,
800, 850, 900, 1800, 1900, 2100, or 2600 MHz
The SIM must already be activated and unlocked.
APN for the associated carrier
To install a SIM card:
1. Make sure the station is powered down. Unplug the battery cable and the solar panel cable and AC adapter (if
applicable).
2. Carefully slide the micro SIM card into the SIM port and gently push it into place (it makes an
audible click when it is properly seated).
Battery disconnected;
no charging device
plugged in
Installing a Micro SIM Card in a HOBO MicroRX (RX210x) Station
U.S. and International Sales: 1-508-759-9500 2 www.onsetcomp.com
3. Plug in the battery and any charging device (if applicable). The LCD displays the message Initializing System while the
system powers up. Wait until you see a checkmark next to System.
4. Connect the station to the computer with a USB cable. It may take a few minutes for the device driver to be installed
on Windows® if this is the first time connecting the device to the computer.
If you are using HOBOconnect:
1. Open HOBOconnect.
2. Select the tile for your logger.
3. Select Configure Connection.
Micro SIM installed
U.S. and International Sales: 1-508-759-9500 3 www.onsetcomp.com
4. Under Cellular Configuration, enter the APN for the SIM card. You can also enter a username and password.
If you are using HOBOware:
1. Open HOBOware.
2. From the Device menu, select Manage RX Station. Note for Windows: You may see a warning that Windows Firewall
has blocked some features. Select Domain networks and click Allow Access.
3. In the RX Station Manager, click the Actions button circled below and select Network Access.
4. Enter the APN for the SIM card. You can also enter a username, password, and phone number as needed.
5. Click Save and then click Done.
6. Click Close in the RX Station Manager.
7. Disconnect the USB cable from the station and unplug the battery cable and the solar panel cable and AC adapter (if
applicable).
U.S. and International Sales: 1-508-759-9500 4 www.onsetcomp.com
8. Once the LCD is blank, plug in the battery and any charging device (if applicable). The LCD displays the message
Initializing System while the system powers up. Wait until you see a checkmark next to System. Your station should
now be ready to connect with HOBOlink®.
•For details on setting up and configuring RX2101, RX2102, RX2103, and RX2104 stations, refer to
www.onsetcomp.com/support/manuals/23808-rx2100-manual.
•For details on setting up and configuring RX2105 and RX2106 stations, refer to
www.onsetcomp.com/support/manuals/24500-rx2105-and-rx2106-manual.
Other manuals for MicroRX RX210 Series
3
This manual suits for next models
1
Table of contents
Other Hobo Data Logger manuals
Hobo
Hobo RX3000 Series User manual
Hobo
Hobo U30 User manual
Hobo
Hobo MX2501 User manual
Hobo
Hobo UX100-023 User manual
Hobo
Hobo Pro U23-00 Series User manual
Hobo
Hobo MX2300 Series User manual
Hobo
Hobo MX series User manual
Hobo
Hobo U12 User manual
Hobo
Hobo MX1104 User manual
Hobo
Hobo MicroRX RX210 Series User manual
Hobo
Hobo MicroRX Station RX2103 User manual
Hobo
Hobo MX1102A User manual
Hobo
Hobo MX1104 User manual
Hobo
Hobo MX1101 User manual
Hobo
Hobo RXMOD-RXW Series User manual
Hobo
Hobo MX100 User manual
Hobo
Hobo U12 User manual
Hobo
Hobo MX1102A User manual
Hobo
Hobo Pro v2 User manual
Hobo
Hobo HOBOnet RX2105 User manual
