Ohlins SD 047 User guide
Steering damper for Yamaha R1/MT10
SD 047
Mounting Instructions
Note!1
Please note that there can be small differences
between your product and the images in
these instructions.
Note!1
Please note that during storage and transport,
especially at high ambient temperature, some
of the oil and grease used for assembly may
leak and stain the packaging. This will not cause
damage to the product, wipe off the excessive
oil or grease with a cloth.
Note!1
Before you install this product, check the kit
contents. If anything is missing, please contact
an Öhlins dealer.
Warning!⚠
Before you install this product, read the Öhlins
Owner’s manual. This product is an important
part of the vehicle and the vehicle stability.
Kit Contents
Description Part No Pcs
Steering damper SD 047 1
Tie-rap 4.8 x 200 00231-01 3
Washer 8.4/24/2 00426-03 2
Screw M8x40 01046-21 1
Sleeve 8/14/7 02238-16 1
Resistor 21702-02 1
Sticker Öhlins Wh/Tr 01185-01 2
Sticker Öhlins Bl/Tr 01185-04 2
Owner´s manual 07261-02 1
2
Instruction for R1:
1
Remove the mirrors.
2
Remove the inner panels below the handle
bars.
3
Remove the upper front fairing together with
screen.
Disconnect the original steering damper cable.
4
Connect the resistor (21702-02), supplied in
this kit.
Attach the resistor with the tie-raps provided.
5
Remove the panels under the lower triple
clamp.
6
Remove the original steering damper.
Continue on page 4.
MOUNTING INSTRUCTIONS
Warning!⚠
We strongly recommend to let an Öhlins dealer
install this product.
Warning!⚠
If you work with a lifted vehicle, make sure that it
is safely supported to prevent it from tipping over.
Note!1
When you work with this product, see the
vehicle service manual for vehicle specic
procedures and important data.
Note!1
Before you install this product clean the vehicle.
3
4
Resistor
Resistor cable
Resistor connection
3
Instruction for MT10:
1
Remove Right hand side “air intake cover” and
wiring cover.
2
Follow original steering damper wiring to
connector and disconnect it. Connect the
Ohlins Resistor (21702-02), supplied in this kit.
Attach the resistor with tie-raps provided.
3
Remove the original steering damper.
Continue on page 4.
1
2
MOUNTING INSTRUCTIONS
4
MOUNTING INSTRUCTIONS
Common instruction
1
Install the Öhlins steering damper to the frame
bracket.
Install in this order:
1. Original screw
2. Washer (00426-03)
3. Original washer
4. Ball joint
5. Original rubber/steel washer (rubber egde
facing down)
6. Frame
Install the Öhlins steering damper to the triple
clamp.
Install in this order:
1. Screw (01046-21)
2. Washer (00426-03)
3. Ball joint
4. Sleeve (02238-16)
5. Triple clamp
6. Original nut
2
Install the removed parts in reverse order.
3
Turn the handle bars fully to the right and left to
make sure that nothing restricts the movement.
1
Install to the frame
Install to the triple clamp
1
2
3
4
5
6
1
2
3
4
5
6
5
This page intentionally left blank
MOUNTING INSTRUCTIONS
6
This page intentionally left blank
MOUNTING INSTRUCTIONS
7
This page intentionally left blank
MOUNTING INSTRUCTIONS
Öhlins Racing AB
Box 722
S-194 27 Upplands Väsby, Sweden
Phone +46 8 590 025 00
fax +46 8 590 025 80
© Öhlins Racing AB. All rights
reserved. Any reprinting or
unauthorized use without the written
permission of Öhlins Racing AB
is prohibited.
Öhlins products are subject to
continuous improvement and
development, therefore, although
these instructions include the most
up-to-date information available at
the time of printing, minor updates
may occur.
To nd the latest information
contact an Öhlins distributor.
Please contact Öhlins if you have
any questions regarding the
contents in this document.
SETUP DATA
Adjuster
knob
Warning!⚠
Before you ride/drive, always make sure that the
setup is according to the recommended setup
data. Read about adjustments and setting up
in the Öhlins Owner’s Manual before you make
any adjustments. Contact an Öhlins dealer if you
have any questions about setting up.
ADJUSTMENTS
Part no. MI_SD047_1
Issued 2020-11-16
Stroke 63 mm
Recommended setup 10 clicks
Other Ohlins Motorcycle Accessories manuals
Ohlins
Ohlins YA 314 User manual
Ohlins
Ohlins YA812 User manual
Ohlins
Ohlins SD 154 User manual
Ohlins
Ohlins BM 344 User manual
Ohlins
Ohlins YA 559 User manual
Ohlins
Ohlins HO 519 User manual
Ohlins
Ohlins SD 053 User manual
Ohlins
Ohlins KA 216 User manual
Ohlins
Ohlins TR 807 User manual
Ohlins
Ohlins SU601 User manual
Ohlins
Ohlins PER 5U20 User manual
Ohlins
Ohlins YA 468 User manual
Ohlins
Ohlins TR 538 User manual
Ohlins
Ohlins HO009 User manual
Ohlins
Ohlins BM 701 User manual
Ohlins
Ohlins SD 064 User manual
Ohlins
Ohlins BM 503 User manual
Ohlins
Ohlins BM 511 User manual
Ohlins
Ohlins Mechatronics 35007-01 User manual
Ohlins
Ohlins HO 201 User manual
