Hinkley MARIN User manual

60" MARIN™

CEILING FAN INSTRUCTION MANUAL

INDOOR / OUTDOOR LED FAN

LED

SO WE’RE HERE IF YOU HAVE A QUESTION, NEED SOME

HELP OR WANT TO CHAT ABOUT OUR PRODUCTS. SEND

SUGGESTIONS OUR WAY TOO—WE’RE ALWAYS LOOKING TO

MAKE YOUR EXPERIENCE WITH HINKLEY A POSITIVE ONE.

This manual contains complete instructions for the

installation and operation of this fan. It has been

designed to make the installation process as easy as

possible. If you are unfamiliar or uncomfortable with

wiring, please contact a qualiﬁed electrician. If you

need additional assistance or have any questions,

please reach out to us.

For warranty information, visit hinkley.com.

> SERVICE@HINKLEY.COM

> 800.HINKLEY

> LET’S SEE THAT HINKLEY STYLE @HINKLEY

#HINKLEYSTYLE

WE WANT YOU TO LOVE YOUR NEW FAN

WARNING:

Read and follow these instructions carefully and be mindful of all warnings shown throughout.

TABLE OF CONTENTS

02 GENERAL INSTALLATION & OPERATING

INSTRUCTIONS

03 IMPORTANT SAFETY PRECAUTIONS

03 TOOLS & MATERIALS REQUIRED

04 UNPACKING YOUR FAN

05 PREPARATION

05 INSTALLING THE HANGING BRACKET

06 HANGING THE FAN

08 ELECTRICAL CONNECTIONS

FINISHING THE INSTALLATION

INSTALLING THE BLADES10

INSTALLING THE MONTING PLATE

11 INSTALLING THE LED ASSEMBLY AND GLASS SHADE

INSTALLING THE WALL CONTROL

INSTALLING THE FAN WITHOUT THE LIGHT KIT (OPTIONAL)

OPERATION

CARE AND CLEANING

TROUBLESHOOTING

ENERGY GUIDE

SPECIFICATIONS

SMART BY BOND

GENERAL INSTALLATION & OPERATION INSTRUCTIONS

02 |hinkley.com

To ensure the success of the installation, be sure to read the instructions and review the diagrams thoroughly before beginning.

To avoid possible electric shock, be sure electricity is turned oﬀ at the main power box before wiring. All electrical connections

must be made in accordance with local codes, ordinances and/or the National Electric Code. If you are unfamiliar with the

methods of installing electrical wiring and products, secure the services of a qualiﬁed and licensed electrician as well as

someone who can check the strength of the supportive ceiling members and make the proper installation(s) and connections.

WARNING: To reduce the risk of ﬁre, electric shock, or other personal injury, mount fan only on an outlet box or supporting system

marked acceptable for fan support of 35 lbs (15.9 kg) or less and use mounting screws provided with the outlet box. Most outlet

boxes commonly used for the support of lighting ﬁxtures are not acceptable for fan support and may need to be replaced.

Consult a qualiﬁed electrician if in doubt.

Make sure that your installation site will not allow rotating fan blades to come in contact with any object. Blades should be at least

7 feet from ﬂoor.

Blades should be attached after motor housing is hung and in place. Fan motor housing should be kept in the carton until ready

to be installed to protect its ﬁnish. If you are installing more than one ceiling fan, make sure that you do not mix fan blade sets, as

each blade is part of a weighted set.

After making electrical connections, spliced conductors should be turned upward and pushed carefully up into outlet box. The

wires should be spread apart with the common conductor and the grounding conductor on one side of the outlet box, and the

"HOT" wires on the other side.

Electrical diagrams are for reference only. Light kits that are not packed with the fan must be UL listed and should be installed

per the light kit's installation instructions.

After fan is completely installed, check to make sure that all connections are secure to prevent fan from falling and/or causing

damage or injury.

The fan can be made to work immediately after installation - the bearings are adequately charged with grease so that, under

normal conditions, further lubrication should not be necessary for the life of the fan.

Do not operate the reverse switch while the fan blades are in motion. The fan must be turned oﬀ and the blades stopped before

reversing the blades direction.

IMPORTANT SAFETY PRECAUTIONS

TOOLS & MATERIALS REQUIRED

WARNINGS:

• PHILLIPS SCREWDRIVER

• FLAT SCREWDRIVER

• WRENCH OR PLIERS

• WIRE CUTTER

• STEPLADDER

• WIRING SUPPLIES AS REQUIRED BY

ELECTRICAL CODE

NOTE:

The important precautions, safeguards and instructions appearing in this manual are not meant to cover all possible conditions

and situations that may occur. It must be understood that common sense, caution and carefulness are factors which cannot be

built into this product. These factors must be supplied by the person(s) installing, caring for and operating the unit.

• Disconnect power by removing fuse or turning oﬀ circuit breaker before installing the fan and/or optional lighting.

• Support directly from building structure.

• To reduce the risk of ﬁre, electric shock, or personal injury, mount to outlet box marked "acceptable for fan support" and use mounting

screws provided with the outlet box. Most outlet boxes commonly used for the support of lighting ﬁxtures are not acceptable for fan

support and may need to be replaced. Consult a qualiﬁed electrician if in doubt.

• Do not use an incandescent light dimmer. Do not use this fan with any transformer type fan speed control device.

• To reduce the risk of personal injury, do not bend the blade arms when installing them, balancing the blades or cleaning the fan. Do not

insert any objects(s) between rotating fan blades.

UNPACKING YOUR FAN

UNPACK YOUR FAN AND CHECK THE CONTENTS.

NOTE: Design of parts shown above may look slightly diﬀerent for

your speciﬁc model of fan.

04 |hinkley.com

• Do not discard the carton. If warranty replacement or repair is ever necessary, the fan should be returned in original packing. Remove all

parts and hardware. Do not lay motor housing on its side, or the decorative housing may shift, be bent or damaged.

• Examine all parts. You should have the following:

INDY PACKAGE CONTENT

1 Blade Set of 3

Blade Support Plates2

Hanging Bracket

Ceiling Canopy and Trim Ring

Downrod Asm.

Yoke Cover

Metal Cover (for no light use)

Fan Housing with Rope Assembly

Adapter Plate A

XX=FAN FINISH

LED Assembly 16W

Adapter Plate B (for no light use)

Glass Shade

Bracket Mounting Hardware

(wood screws, screws, lock

washers, star washers, ﬂat washers,

wire nuts),

Blade to Motor Screws

w/Fiber Washers,

Balance Kit,

Safety cable hardware

(wood screw, ﬂat washer)

Wall Control w/12v Battery

Wall Plate, Face Plate,

2 Sets of Mounting Screws,

and Machine Screws

Hardware Bag

Receiver Incl. 5 Wire Nuts

BL903160Fxx

DR94014Fxx

YC900752Fxx

RH903160Fxx

E903160LED

GL903160OPET

CN903160

980013FAS

MH903160Fxx

CA900752Fxx

PREPARATION

INSTALLING THE HANGING BRACKET

PREPARATION:

Parts identiﬁcation on assembled fan.

Ceiling Fan

Outlet Box

Hanger

Bracket

Outlet Box

Screw

Flat Washer

Lock Washer

Fig. 1

Verify you have all parts before beginning

the installation. Check foam insert closely for

missing parts. Remove motor from packing.

To avoid damage to ﬁnish, assemble motor

on soft padded surface or use the original

foam inset in motor box.

DO NOT LAY MOTOR HOUSING ON ITS SIDE

AS THIS COULD RESULT IN SHIFTING OF

MOTOR IN DECORATIVE ENCLOSURE.

CAUTION: To avoid possible electrical shock, be sure electricity is turned oﬀ

at the main power box before wiring. All wiring must be in accordance with

National and Local Electrical Codes and the ceiling fan must be grounded as

a precaution against possible electric shock.

Locate ceiling joist where fan is to be mounted, being sure location

agrees with the requirements in the minimum clearance section of this

guide. Wood joists must be sound and of adequate size to support 35

pounds (See page 2, items 3 and 4).

If not already present, mount a UL listed outlet box marked "suitable for

fan support" following the instructions provided with the outlet box. The

outlet box must be able to support a minimum of 35 pounds.

Remove canopy from hanger bracket. Remove twist-lock trim ring by

rotaing counter-clockwise. Remove canopy screw that does not have

key slot in canopy. Loosen screw with key slot and remove canopy.

Attach hanging bracket to outlet box using screws provided with the

outlet box.

Downrod

Blade

Yoke cover

Canopy

Motor Housing

LED Light Kit

HANGING THE FAN

06 |hinkley.com

Fig. 1

Fig. 2

Downrod

Cross pin

Hanger

ball Set screw

Downrod

Hook-up

(3) Wires

Mounting Collar

Downrod Pin

Security Screws

Cotter Pin

Top of

Fan Body

Remove ball from downrod by loosening set screw in the side

of the ball. Slide ball down and remove ball pin; remove ball.

(Fig. 1)

Carefully support fan body (motor) in its styrofoam packing with

the mounting collar (where the wires come out) facing upward.

Loosen the two security set screws and remove the downrod

pin and retaining clip from the coupling on top of the motor

assembly. (Fig. 2)

Carefully feed the electrical lead wires and safety cable from

the fan through the downrod. Thread downrod into coupler

until holes align. Insert downrod pin through holes in mounting

collar and downrod; clip cotter pin through small hole in end of

downrod pin to hold downrod in place.

Tighten security set screws against downrod using a large ﬂat

blade screwdriver to ensure a tight ﬁt against downrod.

Tighten nuts against mounting collar.

Safety Cable

Fig. 3

Ground Wire

Top of

Fan Body

Hook-up (3) Wires

Yoke Cover

Downrod

Canopy

Hanger ball

Set screw

Cross Pin

Ball Moisture Cap

REMEMBER to turn oﬀ the power before you begin.

To properly install your ceiling fan, follow the steps below.

Slip the yoke cover, trim ring and canopy onto the downrod. (Fig. 3)

Slide the hanger ball onto the downrod, insert the cross pin through

the downrod and tighten. Tighten the set screw.

Feed wires through holes in rubber ball moisture cap and slide cap

down over top of ball. (Fig. 3)

Lift ball/downrod/fan into hanger bracket opening.

NOTE: The tab opposite hanger bracket opening should ﬁt in slot

on ball. (Fig. 4)

NOTE

6 feet of lead wire is supplied on the fan for use with

longer downrods.

Trim Ring

Safety Cable

Fig. 4

Attach the wood screw and the ﬂat washer to the ceiling joist as

shown (do not fully tighten). Slide the cable clamp onto the

safety cable from the fan. Loop the safety cable around the

wood screw that was just attached to ceiling joist. Feed the end

of the cable into the clamp and pull as much cable through as

possible. Firmly tighten screw in the clamp. Cut oﬀ excess cable.

INSTALLATION OF SAFETY CABLE SUPPORT

Safety Cable Clamp

Safety Cable

Wood Ceiling Joist

Safety Cable Loop

Wood Screw

And Washer

08 |hinkley.com

ELECTRICAL CONNECTIONS

REMEMBER -Turn oﬀ the power! NOTE - Control must be installed within 30 feet of fan.

Use the wire nuts supplied with your fan when making connections. Secure the connectors with electrical tape and make sure there are no loose

connections or wire strands.

Insert the receiver into the ceiling mounting bracket with the ﬂat side of the

receiver facing the ceiling. (Fig. 1) For best performance, make sure the Black

Antenna, on the end of the receiver, remains extended and not tangled with

any of the electrical wires.

2. Make wire connections from the fan to the receiver unit. For this

step use the bundle of 5 wires on the receiver. (Fig. 2)

Connect the YELLOW fan wire to the YELLOW receiver wire.

Connect the GRAY fan wire to the GRAY receiver wire.

Connect the RED fan neutral wire to the RED receiver neutral wire.

Connect the WHITE fan neutral wire to the WHITE receiver neutral wire.

Connect the BLUE fan neutral wire to the BLUE receiver neutral wire.

3. Connect the wiring from the ceiling to the receiver unit. (Use the 2 wire

bundle on the receiver.) Secure with supplied wire nuts.

Connect the BLACK building supply wire to the BLACK receiver wire.

Connect the WHITE receiver neutral wire to the WHITE building neutral

wire.

Connect the COPPER building ground wire to the YELLOW/GREEN fan

ground wire. Also connect the two GREEN wires (from fan) to building

ground wire.

Fig. 2

Fig. 1

Receiver

Hanger

bracket

Receiver

Fan

Outlet box

Ceiling

WH (AC IN)

GRN

GROUND

GRN (downrod)

GRN (hanger bracket)

BLK

BLK (AC IN)

YELLOW/GRN

BLUE (to motor)

WHITE (to motor)

RED (to motor)

GRAY (to motor)

YELLOW (to motor)

RED (motor)

WHITE (motor)

GRAY (motor)

BLUE (motor)

YELLOW (motor)

NOTE: One fan per power circuit.

Other manuals for MARIN

Table of contents

Languages:

Other Hinkley Fan manuals

Hinkley

Hinkley FINNIGAN User manual

Hinkley

Hinkley 52" AFTON User manual

Hinkley

Hinkley Sculpt 903660FGT-LDD User manual

Hinkley

Hinkley HOVER FLUSH 900860FMW-LWD User manual

Hinkley

Hinkley BIMINI 60 User manual

Hinkley

Hinkley INDY MAXX 99 User manual

Hinkley

Hinkley UNA 56 User manual

Hinkley

Hinkley VAIL FLUSH 902552FMW-LWD User manual

Hinkley

Hinkley SCULPT 903680FMB-LDD User manual

Hinkley

Hinkley HOVER FLUSH 72 User manual

Hinkley

Hinkley VANTAGE 66 User manual

Hinkley

Hinkley COLLIER 54 User manual

Hinkley

Hinkley SWELL 903880FGT-NDD User manual

Hinkley

Hinkley INDY MAXX 900982FMB-LDD User manual

Hinkley

Hinkley CONCUR 66 User manual

Hinkley

Hinkley INDY FLUSH 901058FBN-NDD User manual

Hinkley

Hinkley HOVER 60 User manual

Hinkley

Hinkley FACET 60 User manual

Hinkley

Hinkley HOVER FLUSH 900872FMB-LWD User manual

Hinkley

Hinkley NEO 905452FMW-LDD User manual

Hinkley

Hinkley 48" CHET User manual

Hinkley

Hinkley 52 TROPIC AIR User manual

Hinkley

Hinkley ATTICUS 56" User manual

Hinkley

Hinkley IVER 56 User manual

Popular Fan manuals by other brands

ELTA FANS

ELTA FANS H03VV-F installation guide

Hunter

Hunter 20714 Owner's guide and installation manual

Emerson

Emerson CARRERA VERANDA CF542ORB00 owner's manual

Hunter

Hunter Caraway Owner's guide and installation manual

Panasonic

Panasonic FV-15NLFS1 Service manual

Kompernass

Kompernass KH 1150 operating instructions

VES

VES FALA100/12V/TR Original instructions

Vertiv

Vertiv Liebert DCD user manual

Westinghouse

Westinghouse GFP Series owner's manual

Venmar

Venmar KUBIX HRV PLUS Series user guide

Maico

Maico ECR 31 installation instructions

Sonnenkonig

Sonnenkonig Dinky instruction manual

S&P

S&P ECOWATT HXBR manual

Wider

Wider IMP03369BH instruction manual

Panasonic

Panasonic F-60DHN Operating and installation instructions

Broan

Broan 766BN installation guide

Premium

Premium PFS16022 Use manual

Litex Industries

Litex Industries E-CGL52CB5C1 installation guide