Hilti NURON SL 10-22 User manual
1
2
3
4
5
6
7
8
*2384869* 2384869 English 1
Original operating instructions
1 Information about the operating instructions
1.1 About these operating instructions
• Read these operating instructions before the product is used or operated for the first time. This is a
prerequisite for safe, trouble-free handling and use of the product.
• Observe the safety instructions and warnings in these operating instructions and on the product.
• Always keep the operating instructions with the product and make sure that the product is accompanied
by these operating instructions only, when the product is given to other persons.
1.2 Explanation of symbols
1.2.1 Warnings
Warnings alert persons to hazards that occur when handling or using the product. The following signal words
are used:
DANGER
DANGER !
▶Draws attention to imminent danger that will lead to serious personal injury or fatality.
WARNING
WARNING !
▶Draws attention to a potential threat of danger that can lead to serious injury or fatality.
CAUTION
CAUTION !
▶Draws attention to a potentially dangerous situation that could lead to personal injury or damage to the
equipment or other property.
1.2.2 Symbols in the operating instructions
The following symbols are used in these operating instructions:
Comply with the operating instructions
Instructions for use and other useful information
Dealing with recyclable materials
Do not dispose of electric equipment and batteries as household waste
Hilti Liion battery
Hilti charger
1.2.3 Symbols in illustrations
The following symbols are used in illustrations:
These numbers refer to the illustrations at the beginning of these operating instructions.
The numbers in illustrations refer to important work steps or to components important for the
work steps. In the text, the corresponding numbers draw attention to these work steps or compo-
nents, e.g. (3).
Item reference numbers are used in the overview illustration and refer to the numbers used in
the key in the product overview section.
This symbol is intended to draw your special attention to certain points for handling the product.
2 English 2384869 *2384869*
1.3 Product-dependent symbols
1.3.1 General symbols
Symbols used in relation to the product.
The product supports near-field communication (NFC) technology compatible with iOS and
Android platforms.
Do not look into the light source when it is switched on.
Alternating current
Direct current (DC)
Protection class II (double-insulated)
Li-ion battery
Never use the battery as a striking tool.
Do not drop the battery. Never use a battery that has suffered an impact or is damaged in any
other way.
Hilti Li-ion battery type series used. Observe the information given in the section headed In-
tended use.
If applied on the product, the product has been certified by this certification body for the US and
Canadian markets according to the applicable standards.
1.4 Product information
products are designed for professional users and only trained, authorized personnel are
permitted to operate, service and maintain the products. This personnel must be specifically informed about
the possible hazards. The product and its ancillary equipment can present hazards if used incorrectly by
untrained personnel or if used not in accordance with the intended use.
The type designation and serial number are printed on the rating plate.
▶Write down the serial number in the table below. You will be required to state the product details when
contacting Hilti Service or your local Hilti organization to inquire about the product.
Product information
Tower light SL 1022
Generation 01
Serial no.
2 Safety
2.1 Important safety instructions
Warning! Read all instructions. Failure to follow all instructions listed below can result in electric shock,
fire and/or serious injury.
Keep these instructions in a handy yet secure place.
▶Keep your work area clean and well lit. Cluttered or poorly lit work areas invite accidents.
▶Use the product and accessories only when they are in perfect working order.
▶Never tamper with or modify the product or accessories in any way.
▶Persons with reduced physical, sensory or mental abilities or lack of experience and knowledge are not
permitted to use this product.
▶Keep the product out of reach of children.
▶Children must receive instruction and be supervised to ensure that they do not play with the product.
▶Do not use the product where there is a risk of fire or explosion.
▶Do not expose the product to rain or moisture. Water entering the product will increase the risk of
electric shock.
*2384869* 2384869 English 3
▶To reduce the risk of electric shock, do not use the product in wet weather, immersed in water or in any
other liquid. Set up the product in such a way that if it tips over, it cannot fall into water.
▶Do not cover the lamp head.
▶Do not touch hot parts on the product. There is a risk of burning injuries!
▶Only the manufacturer or a similarly qualified person is permitted to replace the light in this light source.
Consult Hilti Service when the light source has reached the end of its life.
▶Risk of injury by falling tools and/or accessories. Before starting work, check that the battery and installed
accessories are secure.
▶Do not look directly into the light source and do not aim the beam at other persons’ faces. Risk of
dazzling or eye injury!
▶Wear protective gloves when setting up and taking down the tower light. Crush hazard.
▶Do not insert foreign objects into the product.
▶Use the lamp only with the tripod legs extended.
▶Do not abuse the cord. Never use the cord for carrying, hanging up or unplugging the product. Keep
the cord away from heat, oil and sharp edges. Damaged or entangled cords increase the risk of electric
shock.
▶Do not touch hot parts on the product.
▶When the product is not in use, keep it where it cannot drop or be pulled into a bathtub or washbasin.
▶Use only accessories specifically intended and recommended for this product by the manufacturer. The
fact that an accessory can be attached to the product does not necessarily mean that it can be used
safely.
2.2 Careful handling and use of batteries
▶Comply with the following safety instructions for the safe handling and use of Li-ion batteries.
Failure to comply can lead to skin irritation, severe corrosive injury, chemical burns, fire and/or explosion.
▶Use only batteries that are in perfect working order.
▶Treat batteries with care in order to avoid damage and prevent leakage of fluids that are extremely
harmful to health!
▶Do not under any circumstances modify or tamper with batteries!
▶Do not disassemble, crush or incinerate batteries and do not subject them to temperatures over 80 °C
(176 °F).
▶Never use or charge a battery that has suffered an impact or been damaged in any other way. Check
your batteries regularly for signs of damage.
▶Never use recycled or repaired batteries.
▶Never use the battery or a battery-operated power tool as a striking tool.
▶Never expose batteries to the direct rays of the sun, elevated temperature, sparking, or open flame. This
can lead to explosions.
▶Do not touch the battery poles with your fingers, tools, jewelry, or other electrically conductive objects.
This can damage the battery and also cause material damage and personal injury.
▶Keep batteries away from rain, moisture and liquids. Penetrating moisture can cause short circuits,
electric shock, burns, fire and explosions.
▶Use only chargers and power tools approved for the specific battery type. Read and follow the relevant
operating instructions.
▶Do not use or store the battery in explosive environments.
▶If the battery is too hot to touch, it may be defective. Put the battery in a place where it is clearly visible
and where there is no risk of fire, at an adequate distance from flammable materials. Allow the battery to
cool down. If it is still too hot to touch after an hour, the battery is faulty. Consult Hilti Service or read the
document entitled "Instructions on safety and use for Hilti Li-ion batteries".
Observe the special guidelines applicable to the transport, storage and use of lithium-ion batteries.
Read the instructions on safety and use of Hilti Li-ion batteries that you can access by scanning
the QR code at the end of these operating instructions.
4 English 2384869 *2384869*
3 Description
3.1 Product overview 1
@Light / lamp head
;Bow-shaped grip of lamp head
=Clamping lever for height adjustment
%Eyelets for shoulder strap
&Battery compartment lid
(Battery state of charge indicator
)Tripod legs
+Carrying handle
§Tripod lock release
/Control panel
:Light area indicator
∙Light area button
$On/off button
£Brightness button
|Brightness indicator
¡Socket with cover
QBattery release button
WBattery state of health indicator
3.2 Intended use
The product described is a tower light with built-in tripod. The tower light is for lighting up jobsites and it
offers 360° illumination with at least 6500 lumen.
The tower light can be operated either cordless or with a supply cord.
• For this product, use only Hilti Nuron lithium-ion batteries of the B 22 series. For optimum performance,
Hilti recommends the batteries stated in the table at the end of these operating instructions for this
product.
• For these batteries, use only Hilti chargers of the type series stated in the table at the end of these
operating instructions.
3.3 Items supplied
Tower light, shoulder strap, operating instructions
Other system products approved for use with this product can be found at your local Hilti Store or at:
www.hilti.group
3.4 Status indicators of the Liion battery
Hilti Nuron Li-ion batteries can indicate state of charge, fault messages and the battery's state of health.
3.4.1 Indicators for state of charge and fault messages
WARNING
Risk of injury by a falling battery!
▶If the release button is pressed with a battery inserted in the product, subsequently check that the battery
is correctly re-engaged and secure.
Short-press the release button of the battery to get whichever of the following status indications is applicable
at the time.
State of charge and, if applicable, faults are indicated constantly as long as the connected product is
switched on.
Status Meaning
Four (4) LEDs show constantly green State of charge: 100 % to 71 %
Other manuals for NURON SL 10-22
2
Table of contents
Languages:
Other Hilti Work Light manuals
Hilti
Hilti SFL 18-A User manual
Hilti
Hilti SL 2-A12 User manual
Hilti
Hilti NURON SL 10-22 User manual
Hilti
Hilti NURON SL 2-22 User manual
Hilti
Hilti SL 6-22 User manual
Hilti
Hilti SL 2-A12 User manual
Hilti
Hilti SL 2-A12 User manual
Hilti
Hilti SL 2-22 User manual
Hilti
Hilti SFL 14-A User manual
Hilti
Hilti NURON SL 10-22 User manual
Popular Work Light manuals by other brands
PowerSmith
PowerSmith PWLD080T Operator's manual
MaxLite
MaxLite 73683 installation instructions
Heitronic
Heitronic Trend 27867 Installation and operating instructions
Monzana
Monzana Gore MZCL10 manual
EINHELL
EINHELL TE-CL 18/2000 LiAC Original operating instructions
Bayco
Bayco NIGHTSTICK Dual-Light Xtreme Lumens... instruction manual