Hilintec C15 User manual

D15 Flow Control Vacuum Pump and Compressor

Series

User Guide

Issue

Date

2020-06

D15 Flow Control Vacuum Pump and Compressor Series User Guide

No part of this document may be reproduced or transmitted in any form or by any means

without prior written consent of Chengdu Hilin Technology Co., Ltd.

Trademarks and Permissions

is a trademark of Chengdu Hilin Technology Co., Ltd.

All other trademarks and trade names mentioned in this document are the property of

their respective holders.

Notice

The purchased products, services and features are stipulated by the contract made

between Chengdu Hilin Technology Co., Ltd. and the customer. All or part of the products,

services and features described in this document may not be within the purchase scope or

the usage scope. Unless otherwise specified in the contract, all statements, information,

and recommendations in this document are provided "AS IS" without warranties,

guarantees or representations of any kind, either express or implied.

The information in this document is subject to change without notice. Every effort has

been made in the preparation of this document to ensure accuracy of the contents, but all

statements, information, and recommendations in this document do not constitute a

warranty of any kind, express or implied.

Chengdu Hilin Technology Co., Ltd.

Address:

No.3663 Section 2 Muhua Road

Shuangliu District

Chengdu Sichuan China 610000

Website:

http://www.hilintec.com

Tel:

+86-28-62567958

D15 Flow Control Vacuum Pump and Compressor Series User Guide

About This Document

Purpose

This document is a description of the D15S flow control vacuum

pump and compressor series in the test period, which is used to

guide the relevant technical personnel to understand the product

characteristics.

Intended Audience

This document is intended for technical personnel. You should have

a good understanding of your product and have a clear concept of

the relevant parameters, specifications, and other information of the

applications of the micro pump.

Keyword

PWM Speed Control, working status indicator, related parameters,

wiring instructions

D15 Flow Control Vacuum Pump and Compressor Series User Guide

Change History

The change history accumulates each update of this document. The

latest version of the document contains all the previous updates.

Issue

Date

Product

Version

Issuer

Modification

2018-3

1.0

First official release

2018-10

1.0

Add product images

and models of

matching speed

controllers

2018-11

1.0

Add product version

description and speed

feedback description

2019-09

1.0

LYZ

Modify the document

format

2019-12

1.0

Update notes in section

3.1

2020-02

1.0

Add model

description; update

outline drawing

2020-03

1.0

Update definition of

FG feedback signal

2020-06

1.0

Update medium

description

D15 Flow Control Vacuum Pump and Compressor Series User Guide

III

Contents

About This Document............................................................................................... I

Change History..........................................................................................................II

Contents.................................................................................................................... III

1Product Characteristics........................................................................................1

1.1 Compact Size....................................................................................................................................... 1

1.2 Working Status Indicator......................................................................................................................1

1.3 Brushless Motor................................................................................................................................... 1

1.4 Protections............................................................................................................................................1

2Special Features.....................................................................................................2

2.1 Speed Control Feature..........................................................................................................................2

2.2 Warning Feature................................................................................................................................... 2

3Technical Parameters........................................................................................... 3

3.1 Key Parameters.................................................................................................................................... 3

3.2 Description of Versions........................................................................................................................ 3

3.3 Life-time Test Conditions.................................................................................................................... 4

3.4 Working Conditions............................................................................................................................. 4

3.5 Materials...............................................................................................................................................5

3.6 Parameter Curve...................................................................................................................................5

4Product Model Description................................................................................. 6

4.1 Brief Description of Model Naming.................................................................................................... 6

This series of pumps are mainly: basic type.............................................................................................. 6

5Electrical Connection............................................................................................7

6Cautions................................................................................................................. 10

7Dimensions............................................................................................................ 11

8Appearance............................................................................................................12

D15 Flow Control Vacuum Pump and Compressor Series User Guide

1Product Characteristics

1.1 Compact Size

The product weighs about 50g and the overall size is about

50x29x36mm.

1.2 Working Status Indicator

The bottom case of the pump is made of light-transmitting material

ABS, which can visually reflect the working status of the pump

through the indicator light.

1.3 Brushless Motor

This model is driven by brush-less motors which have the

advantages of long service life, low interference and high reliability.

1.4 Protections

Equipped with overheating protection, overload protection and

reverse connection protection function to prevent accidental damage

to the pump.

D15 Flow Control Vacuum Pump and Compressor Series User Guide

2Special Features

2.1 Speed Control Feature

The flow can be changed by adjusting the motor speed of the pump

(by adjusting the PWM duty cycle).

Or by ordering our company's special speed controller for micro

pump (model: TS-G12) to regulate the speed.

2.2 Warning Feature

The color of the indicator light displayed on the transparent bottom

case (as shown in Figure 2-1 and Figure 2-2) can feedback the

working status of the pump:

1. It is normal when the blue light flashes regularly;

2. When the light remains red, it is abnormal, i.e. the motor runs too

low;

3. When the red and blue lights alternately flash, it is abnormal , and

at this time,the motor speed is low and unstable;

4. The indicator light is off when the positive and negative

connections are reversed;

5. When the voltage is out of the working voltage range (3.2V～6V),

the indicator light is off.

Figure 2-1 Normal working status Figure 2-2 Abnormal working status

D15 Flow Control Vacuum Pump and Compressor Series User Guide

3Technical Parameters

3.1 Key Parameters

Model

Voltage

(V DC)

Load

Current

（A）

Flow（L/min）

Relative

Vacuum

（-kPa）

Maximum

Output

Pressure

（kPa）

Weight

（g）

Peak Flow

Average

Flow

D15S

≤280

≥0.4

≥18

≥22

≈50

Note:

1.Working voltage is 3.2V～6V, input voltage change will affect the load current;

2.Unless otherwise specified, the technical parameters are measured under the

conditions of temperature 25℃ and standard atmospheric pressure of 101kPa. For

products with other parameters and specifications, you can contact us to customize.

3.The parameters in the table are measured at the maximum speed of the motor

under rated voltage. When the motor speed changes, the pressure/vacuum level is

basically unchanged.

4.The peak flow rate in the table refers to the flow value measured with a rotameter,

and the average flow rate is measured with a soap film flow-meter.

3.2 Description of Versions

Performance

Version

Simplified

Version

Standard Version

Premium Version

Life time

>2500h

>6000h

>10000h

Noise

★

★★

★★★

D15 Flow Control Vacuum Pump and Compressor Series User Guide

Reliability

★

★★

★★★

Parameter

Consistency

★

★★

★★★

Speed Feedback

None

Equipped with FG signal feedback

Speed Controller

None

Compatible with TS-G12 type speed controller

Note: 1. The more ★, the better performance of this item.

2. The noise data of the simplified version and the standard version are not

specified. For the noise data of the premium version, please refer to the

latest information.

3.3 Life-time Test Conditions

In a clean, non-corrosive laboratory, the pump carries a full load(the

inlet is blocked and the outlet directly connected to the atmosphere),

and operates continuously around the clock. The ambient temperature

is 5℃ ～33℃, fluctuates with the climate; the relative humidity is

30%～90%, which fluctuates with the climate.

3.4 Working Conditions

1. Environment: Permissible ambient temperature range of the pump

is 0 ℃ ～ 50 ℃, permissible relative humidity is ≤90%, no

condensation. The pump should not be exposed to the sun, and

should work in a clean and ventilated environment.

2.Medium: Permissible gaseous media temperature range is 0 ℃ ～

50℃. The medium is allowed to be rich in water vapor, but cannot

contain particles or oil mist.

3. Load:

1) When used as a compressor: the outlet can run at full load ( i.e.

the inlet is completely blocked), but the applied load cannot exceed

the maximum discharge pressure of the pump; the inlet must keep

unobstructed.

2) When used as a vacuum pump: the inlet can operate at full load

( i.e. the inlet is completely blocked), but the applied load cannot

D15 Flow Control Vacuum Pump and Compressor Series User Guide

exceed the maximum vacuum of the pump; the outlet must be

unobstructed.

3.5 Materials

1. The materials of the wetted parts: reinforced nylon and EPDM

rubber, which have certain corrosion resistance. Please check the

chemical resistance and compatibility of the medium according to

the wetted material.

2. The pump body is made of reinforced nylon for plastic parts,

EPDM for elastomer parts and light-transmitting ABS for bottom

case.

3.6 Parameter Curve

Vacuum degree-flow curve, there are individual differences between

different micro pumps, this curve is a statistical value, only as a

technical reference for users to confirm the working point. The

"flow" mentioned in this section refers to the "average flow".

（to be updated……）

Note: 1. The maximum average flow rate of the curve will be slightly lower than the

nominal value, which is due to the resistance of the test pipeline components,

which leads to the attenuation of the flow;

2. The value of this curve is for reference only, not as a basis for product

acceptance.

Other manuals for C15

This manual suits for next models

Table of contents

Popular Control Unit manuals by other brands

Festo

Festo Compact Performance CP-FB6-E Brief description

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Quick installation guide

JS Automation

JS Automation MPC3034A user manual

JAUDT

JAUDT SW GII 6406 Series Translation of the original operating instructions

Spektrum

Spektrum Air Module System manual

BOC Edwards

BOC Edwards Q Series instruction manual

KHADAS

KHADAS BT Magic quick start

Etherma

Etherma eNEXHO-IL Assembly and operating instructions

PMFoundations

PMFoundations Attenuverter Assembly guide

GEA

GEA VARIVENT Operating instruction

Walther Systemtechnik

Walther Systemtechnik VMS-05 Assembly instructions

Altronix

Altronix LINQ8PD Installation and programming manual

Eaton

Eaton Powerware Series user guide

WAGO

WAGO 750-407/040-000 manual

Sony

Sony CCU-590 Operation manual

Graco

Graco 25D614 instructions

Task Force Tips

Task Force Tips YE-RF-900 Instructions for installation, safe operation and maintenance

Shini

Shini SPV-U Series manual