HIK VISION DS-KH6320-WTE1 Datasheet
i - I
- II
The symbols that may be found in this document are dened as follows.
Indicates a hazardous situaon which, if not avoided, will or
could result in death or serious injury.
Indicates a potenally hazardous situaon which, if not
avoided, could result in equipment damage, data loss,
performance degradaon, or unexpected results.
Provides addional informaon to emphasize or
supplement important points of the main text.
1 Appearance ................................................................................................ 1
2 Terminal and Wiring Descripon ................................................................ 3
2.1 Terminal Descripon ......................................................................................... 3
2.2 Wiring Descripon ............................................................................................ 3
3 Installaon .................................................................................................. 5
3.1 Wall Mounng Plate ......................................................................................... 5
3.2 Wall Mounng with Juncon Box ..................................................................... 5
A. Cables ........................................................................................................ 7
Network Indoor Staon Installaon Guide
i - I
1 Display Screen
2 Microphone
Network Indoor Staon Installaon Guide
3 Debugging Port
4 Network Interface
5 Loudspeaker
6 TF Card Slot
7 Alarm Terminal
8 Reserved
9 Network Interface and Power Supply
The debugging port is used for debugging only.
Network Indoor Staon Installaon Guide
There are 20 pins in the terminal on the rear panel of the indoor staon: 2 RS-485
pins, 5 reserved pins, 4 relay output pins, 8 alarm input pins, and 1 GND pin.
Wire the devices with power supply cables as picture shown below.
Door staon should be connected to CH6 of the video/audio distributor with two-
wire cables.
Indoor Staon should be connected to any terminal of CH1 to CH5 of the video/
audio distributor with two-wire cables.
Make sure all the related equipment is power-o during the installaon.
Network Indoor Staon Installaon Guide
Network Indoor Staon Installaon Guide
Indoor staon supports wall mounng.
The wall mounng plate and the juncon box are required to install the indoor
staon onto the wall.
The dimension of juncon box should be 75 mm (width) × 75 mm (length) × 50 mm
(depth).
The dimension of wall mounng plate is shown.
Network Indoor Staon Installaon Guide
•Make sure the device in the package is in good condion and all the assembly
parts are included.
•The power supply the indoor staon supports is 12 VDC. Please make sure your
power supply matches your indoor staon.
•Make sure all the related equipment is power-o during the installaon.
•Check the product specicaon for the installaon environment.
Chisel a hole in the wall. The size of the hole should be 76 mm (width) × 76 mm
(length) × 50 mm (depth).
Insert the juncon box to the hole chiseled on the wall.
Fix the wall mounng plate to the juncon box with 2 screws.
Hook the indoor staon to the wall mounng plate ghtly by inserng the plate
hooks into the slots on the rear panel of the indoor staon, during which the
lock catch will be locked automacally.
Network Indoor Staon Installaon Guide
DS-KAD706 -
DS-KAD706-S
Transmission
Distance ≤ 60
m
Transmission
Distance ≤ 60
m
Transmission
Distance ≤ 60
m
Transmission
Distance ≤ 35
m
DS-KAD706-S -
DS-KAD706-S
Transmission
Distance ≤ 60
m
Transmission
Distance ≤ 60
m
Transmission
Distance ≤ 60
m
Transmission
Distance ≤ 35
m
DS-KAD706-
DS-KD8003-
IME2
Transmission
Distance ≤ 35
m
Transmission
Distance ≤ 60
m
Transmission
Distance ≤ 60
m
Transmission
Distance ≤ 35
m
DS-KAD706-
DS-KH6320-
WTE2
Transmission
Distance ≤ 35
m
Transmission
Distance ≤ 60
m
Transmission
Distance ≤ 60
m
Transmission
Distance ≤ 35
m
Network Indoor Staon Installaon Guide
Other manuals for DS-KH6320-WTE1
4
Other HIK VISION Intercom System manuals
HIK VISION
HIK VISION DS-KD9613 User manual
HIK VISION
HIK VISION DS-KM9503 User manual
HIK VISION
HIK VISION DS-KH6320-WTDE1 User manual
HIK VISION
HIK VISION DS-KH9510-WTE1 User manual
HIK VISION
HIK VISION DS-KV8213 User manual
HIK VISION
HIK VISION DS-KH6320-WTDE1 User manual
HIK VISION
HIK VISION DS-KD9633-E6-WBE6 User manual
HIK VISION
HIK VISION DS-KB8112-IM User manual
HIK VISION
HIK VISION DS-1350HMI User manual
HIK VISION
HIK VISION 8 Series User manual
HIK VISION
HIK VISION DS-KIS204T User manual
HIK VISION
HIK VISION DS-KB2421-IM User manual
HIK VISION
HIK VISION DS-KH6320-WTE1 User manual
HIK VISION
HIK VISION DS-PEA4H-10 User manual
HIK VISION
HIK VISION DS-KV8102-1A User manual
HIK VISION
HIK VISION DS-KH7300EY Series User manual
HIK VISION
HIK VISION DS-KH6310-W User manual
HIK VISION
HIK VISION DS-KH6320-WTE1 User manual
HIK VISION
HIK VISION KH9300A User manual
HIK VISION
HIK VISION DS-KH6320Y-WTPE2 User manual
