High Voltage DTS-60A User manual

DTS-60A

DTS-100A

Dielectric Oil Test Set

Operator’s Manual

Manual Version 2.01

High Voltage

I C

DTS-60A / DTS-100A OPERATORS MANUAL

forbidden. Information regarding any errors found in it or suggestions concerning im rovement are a reciated.

Since roducts are subject to continuous check and im rovement, High Voltage inc. reserves the right to make

changes in information contained in this manual without rior notification.

Manual Revision 4/6/2017 Version 2.01

 HIGH VOLTAGE, INC.

31 County Route 7A

Copake, N.Y. 12516

Phone : (518) 329-3275

ax : (518) 329-3271

Web : http://www.hvinc.com

e-mail: [email protected]

DTS-60A / DTS-100A OPERATORS MANUAL

Icons & otation

This icon indicates danger conditions!

Danger!

This icon indicates warnings!

Warning!

This icon indicates a hint or a tip!

ote!

DTS-60A / DTS-100A OPERATORS MANUAL

This Operator manual contains instructions for the operation

of a High Voltage power source. The operator of this

equipment must use good judgement and follow all safety

precautions noted in this guide to ensure the protection of

themselves and others in close proximity to the test area.

Failure to follow the instruction could result in injury or

death.

Proper grounding of the test set must be done prior to

connecting this unit to a power source.

DTS-60A / DTS-100A OPERATORS MANUAL

Table of Contents

1. Specifications and Controls

1.1 Features and S ecifications

1.2 Control Panel

1.3 User Interface

1.3.1 Menu Overview

1.3.2 Key ad O erations

1.3.3 Warning Messages

1.3.4 Question Messages

1.3.5 Error Messages

1.3.6 Indicators

1.4 Setu the Equi ment

1.5 Startu the Equi ment

2. Menu/Submenus and Settings

2.1 Main O eration Overview

2.2 Main Menu

2.3 Settings Submenu

2.3.1 Time/Date Dialog

2.3.2 O erator Dialog

2.3.3 LCD Contrast Dialog

2.3.4 Language Dialog

2.3.5 Region Dialog

2.3.5 U date Firmware Dialog

3. Simple Test

3.1. Sim le Test O erations

3.2. Sim le Test Initialization

3.3. Sim le Test Controls

3.4. Sim le Test Execution

3.5. Sim le Test Termination

3.6. Sim le Test Exam le

4. Standard Tests

4.1. Standard Test Descri tion

4.2. Select a Standard Test

4.3. Standard Test Execution

4.4. Standard Test Exam le

DTS-60A / DTS-100A OPERATORS MANUAL

5. User Defined Tests

5.1. Test Descri tion

5.1.1 Test Structure

5.1.2 Test O erations

5.2. Select Test Menu

5.3. Scri t Files for User Defined Tests

5.3.1. Scri t File Commands and Arguments

5.3.2. Scri t File Test Exam les

6. History and Results

6.1. History Results

6.2. Exam le Using History Results

7. Printer and Printouts

7.1. Printer Descri tion

7.2. Changing the Pa er Roll

7.3. Printout Descri tion

8. Remote Operation

8.1. Remote O eration Descri tion and O eration

8.2. System Commands and Parameters

8.2.1 ver

8.2.2 cls

8.2.3 time

8.2.4 date

8.2.5 o erator

8.2.6 contrast

8.3 Test Commands

8.3.1. test list

8.3.2. test read

8.3.3. test delete

8.3.4. test erase

8.3.5 test download

8.4 Test Results Download Commands

8.4.1 history list

8.4.2 history read

8.4.3 history erase

Appendix I - Care and Maintenance

Appendix II - Example Test Program Script Files

Appendix III - Firmware Upgrade Procedure

Appendix IV - DTS Remote Operation Program

DTS-60A / DTS-100A OPERATORS MANUAL

Specifications and Controls

This section describes the s ecifications, controls, and features of the DTS-60A & DTS-100A

AC Dielectric Oil Test Sets.

Included in this section is a brief introduction about the equi ment’s set u and start u .

Features and S ecifications 1.1

Control Panel 1.2

User Interface 1.3

Menu Overview 1.3.1

Key ad O erations 1.3.2

Warning Messages 1.3.3

Question Messages 1.3.4

Error Messages 1.3.5

Indicators 1.3.6

Setu the Equi ment 1.4

Startu the Equi ment 1.5

DTS-60A / DTS-100A OPERATORS MANUAL

1.1 Features and Specifications

The DTS-60A & DTS-100A AC Dielectric Oil Test Sets rovide automatic, rogrammable, and

accurate measurement of breakdown voltage for insulating oils used in high-voltage electrical

equi ment.

Main features of the DTS-60A & DTS-100A Series of AC Dielectric Oil Test Sets

User Interface

Dot Matrix Liquid Crystal Dis lay (128x64)

Com act 5-key key ad for o eration

User friendly, menu driven functionalities

Large out ut voltage dis lay

Functionalities

Test Result storage and re orting

Real Time Clock

Ambient Tem erature measurement

International Standard Tests

User Defined Tests

Language selection

Measurements and Control

High accuracy of High Voltage measurement (0.5%)

Digitally selected Voltage rate of rise (0.1kV/s ste )

Arc detection with less than 5 milliseconds shutdown

Digital Closed-Loo for voltage control

Equipment Case

Rugged aluminum case

Window for observation of oil test

DTS-60A / DTS-100A OPERATORS MANUAL

Table 1.1 - S ecifications

DTS-60A & DTS-100A unless otherwise indicated

Input 120V, 50/60 Hz, 5 am s, single hase

230V, 50/60 Hz, 3 am s, single hase

Output DTS-60A: 0 – 60kVac, 800VA resistive load, between bushings

DTS-100A: 0 – 100kVac, 800VA resistive load, between bushings

Output Termination Dual Ca acitively Graded Bushings

Display Dot-Matrix 128x64

Keypad 5 keys for equi ment’s functionalities

Printer 40 column dot-matrix

Remote Operation RS-232 Serial Interface or USB HID Serial Interface

Breakdown Shutdown Less than 5 ms

Accuracy 0.5%

Operating Temperature -14F to 104F (-10C to 40C)

Case Size 14.75w x 14d x 11.5h in (36.88w x 35d x 28.75h mm)

H.V. Tank High Voltage Tank Included

Weight 60 lbs.

DTS-60A / DTS-100A OPERATORS MANUAL

1.2 Control Panel

The equi ment’s Control Panel is de icted in Figure 1.1. It consists of the following:

Input Power Connector

The In ut Power connector acce ts most standard electrical equi ment ty e

cords. The ower su lied to the in ut connector must be from a grounded

source rated to match the in ut ower s ecifications noted in Table 1.1.

Main Power Switch

The Main Power switch rovides the ower to the control and ower circuits. The

neon lam will light when ower is on and voltage is available through the in ut

line cord. The In ut Power Fuse, located electrically before the Main Power

switch, rovides line fault rotection for the unit.

Fuse Socket

LCD Display

The Liquid Crystal Dis lay guides the user to the system’s functionalities.

Keypad

Com act 5-key key ad for equi ment o eration.

Printer

Dot Matrix rinter for o tionally out utting results from the current test, or from

the stored history of the last fifty tests erformed.

Figure 1.1 – DTS-60A / DTS100A Control Panel

Other manuals for DTS-60A

This manual suits for next models

Table of contents

Other High Voltage Test Equipment manuals

High Voltage

High Voltage DTS-60A User manual

High Voltage

High Voltage VLF-CM Series Guide

Popular Test Equipment manuals by other brands

SMART

SMART KANAAD SBT XTREME 3G Series user manual

Agilent Technologies

Agilent Technologies BERT Serial Getting started

Agilent Technologies

Agilent Technologies N3280A user guide

Vernier

Vernier Go Direct Voltage manual

Lifeloc

Lifeloc R.A.D.A.R. quick start guide

Fluke

Fluke T5-600 Service information

Mercury

Mercury TSL01 user manual

MAHA

MAHA MBT Series Original operating instructions

Fuji Electric

Fuji Electric P-61 instruction manual

ETC

ETC SealerAtor user manual

Skyfine

Skyfine ETHYWAY V2 user manual

Appion

Appion G5 Twin Operation manual

PCB Piezotronics

PCB Piezotronics 8159-0112A Installation and operating manual

BW Technologies

BW Technologies MicroDock II user manual

Sun Nuclear

Sun Nuclear 1027 user guide

Biomark

Biomark HPR LITE READER user manual

Hioki

Hioki 3169-20 instruction manual

Ashcroft

Ashcroft ATE-100 operating manual