Hi-Tec Vektor 280 User manual

2 3

Table of Contents

Introduction...................................................................3

Warnings......................................................................3

Package Contents..........................................................5

Specifications................................................................5

Product Layout..............................................................6

Assembly......................................................................7

Connecting Your Receiver...............................................7

CC3D Configuration.....................................................10

Flying the Vektor..........................................................10

Unlock/Lock the Motors................................................10

Controlling the Vektor 280.............................................11

Aerobatic Maneuvers....................................................12

Using the FPV System....................................................13

Using the Drone Finder Function.....................................14

Using the Intelligent LED System.....................................15

Low Battery Warning....................................................15

Replacement Parts........................................................16

Warranty Service and Repair.........................................16

Introduction

Warnings and Safety Notes

Congratulations on purchasing Hitec's Vektor 280.

Be prepared to zip through the skies with swift, fearless

precision! Our high performance FPV racer features a

compact, integrated circuit board system for reduced

weight and a sturdy, quality-constructed carbon fiber

frame for durability and resilience.

Completely assembled for your convenience, the Vektor

280 takes flight in minutes and will have you speeding like

a superhero in a flash.

The Vektor 280 is not a toy and is not suitable for use by

children under the age of 14. Additionally, the Vektor 280

is a high performance FPV racing drone and requires some

skill to fly. If you have never flown an FPV racing drone, it is

recommended you seek out help before attempting to fly it

on your own.

WARNING: SPINNING PROPELLERS CAN CAUSE SERIOUS

INJURIES

It is recommended that you wait to install the propellers until

you are finished setting up your drone and are ready to fly.

Hitec RCD USA accepts no liability or responsibility for

injuries or damages incurred by the use of the Vektor 280.

OPERATE RESPONSIBLY!

Flying Safely

Recreational or commercial use? Using a drone in

connection with a business is considered to be

commercial use by the FAA.

4 5

This includes but is not limited to:

• Real estate, wedding or other photography

• Inspection or survey services

• Film or television production

Visit faa.gov/uas for more information.

Go to knowbeforeyoufly.org to stay up to date on how and

when you can fly your drone.

Know Your Surroundings

Some municipalities prohibit the operation of remote

controlled aircraft within public spaces such as parks and

school grounds. There are rules of the air you need to know.

Always check with local authorities before you fly your drone

and keep the following in mind:

• Always fly below 400 feet

• Avoid flying over groups of people and stadium events

• Never fly within 5 miles of an airport without

 contactingairportauthoritiesandtheairport’straffic

control facility

• Keep well away from emergency response efforts such

as fires

• Avoid flying near other aircraft

• Be aware of FAA airspace requirements:

faa.gov/go/uastfr

• Never fly under the influence

FAILURE TO FOLLOW THESE WARNINGS CAN BE CONSIDERED NEGLIGENCE BY

THE OPERATOR AND MAY NEGATE ANY CLAIMS FOR DAMAGES INCURRED.

• Completely Assembled 280 class FPV Racing Quad

• IntegratedSystemBoardputstheESC’s,FlightController

and Video Transmitter on a Single Board to reduce weight

Features

• High Quality Carbon Fiber Frame with 3mm Arms

• Four 20 Amp Speed Controls with SimonK

OneShot Setting

• Open Pilot CC3D Flight Controller

• 5.8GHz 600mw* Video Transmitter

• Bright Intelligent LED System

• Low Battery Warning Feature

• Drone Finder Function

* WARNING: FCC LICENSE MAY BE REQUIRED TO

USE THIS PRODUCT.

FPV video transmitters with an output power greater than

25mW require a HAM license to operate legally in the USA.

Go to the Amateur Radio Relay Network web page at

www.arrl.org for more information.

Completely Assembled Vektor 280 FPV Racing Drone

Complete with preinstalled brushless motors, speed controls,

flight controller and system management board), FPV Camera

and Video Transmitter.

• 3 4S 1400 2300mAh LiPo Power Battery with

XT60 Connector

• Radio System with at least 5 Channels w/Micro Receiver

• 5.8GHz Video Receiver

• Video Display or Goggles

Size and Weight

Size Class: 280mm

Weight w/o Battery: 348g

Package Contents

Required to Complete

6 7

Power System

• Brushless Motors – 2204 2150KV

• Propellers - 6 x 3

• ESC’s–20Aw/SimonKOneShot

• Flight Time: 9-12 minutes

Flight Control System

CC3D Atom with Open Pilot

• Powerful STM32 32-bit MCU with 128KB Flash and

20KB RAM

• MPU6000 3 Axis Gyroscope / Accelerometer

• Software supports for Windows, Mac and Linux

• Works with PWM, PPM, Spektrum® satellite and S-Bus

Receivers

FPV System

• Video Camera - 400K Pixels 135º Field of View

• Video TX – 600mw 32 Channel 5.8GHz

The Vektor 280 comes completely assembled; to prepare for

flight, you just need to install your receiver and battery.

Receiver Installation

• Make sure your receiver is bound to your transmitter

before installation.

• The flight controller in the Vektor 280 supports PWM,

Spektrum® satellite and S-Bus type receivers. It

is best to install your receiver in the front of the model

behind the camera.

• Connect the receiver to the flight controller using the

attached cables. The cables marked S are for S-bus

receivers and the numbered ones are for PWM. You

can remove the set of cables that you are not using.

Battery Installation

• Slide the battery into the battery compartment.

• Move the battery forwards or backwards so that the

balance of the drone is in the center.

• Secure the battery with the Velcro Strap.

• DO NOT PLUG IN THE BATTERY AT THIS TIME.

Product Layout

Assembly

Connecting the Receiver

Refer to the following instructions to connect your receiver to

the flight control.

CAUTION: The power out voltage is regulated at 5.0VDC. This works with most

receivers on the market today, but you should check your receiver manual to be

sure it will work properly at this voltage.

8 9

PWM Receivers

Connect your receiver to the numbered connector.

The connectors are marked and should plug into the

corresponding channel output on your receiver.

Refer to the following chart for color cross reference.

S-Bus or Spektrum®Satellite Receivers

Connect the plugs marked S to your receiver as shown

in the chart below.

Connector Receiver Output

#1 Black, Red, White Ground(-), Power out(+)

Signal

#2 Blue Channel 2

#3 Yellow Channel 3

#4 Green Channel 4

#5 Orange Channel 5

#6 Purple Channel 6

Connector

Color

S BUS Spektrum®

Black Ground(-), Power

out(+)

Signal

Ground (-)

Red Channel 2 Power Out (+)

Blue N/A N/A

Yellow TX Signal TX Signal

10 11

CC3D Configuration

Flying the Vektor 280

Unlock/ Lock the Motors

WARNING: SPINNING PROPELLERS CAN CAUSE SERIOUS

INJURIES

It is recommended that you remove the propellers while you

are setting up your drone.

The flight controller must be configured to match your

receiver. The flight controller uses Open Pilot ground control

software. The open Pilot configuration suite is available for

download at www.openpilot.org. Follow the instructions in

the software to configure your flight controller.

WARNING: If you reset the CC3D flight controller, you will

need to go in and adjust the ROLL attitude. It must be set to

180 for proper operation.

• Turn on your transmitter and make sure all the trims

are in their neutral position, all the function switches

are in their off position and the throttle stick is in its

lowest position.

• Place the Vektor 280 on a flat surface and connect

the battery. You will hear a series of beeps as the

system initializes, once it stops you are ready to

take off.

Unlock the Motors: To lock the motors, push the stick down

and move the rudder to the right. The motor should now be

locked. You can test it by moving the throttle stick slowly up,

the motors should not start.

WARNING: SPINNING PROPELLERS CAN CAUSE

SERIOUS INJURIES

Locking the Motors: To lock the motors, push the stick down

and move the rudder to the right. The motor should now be

locked. You can test it by moving the throttle stick slowly up,

the motors should not start.

NOTE: The motors are locked by default once the battery is

unplugged and the system reinitialized.

Controlling the Vektor 280

Refer to the following to see how stick inputs affect the

movements of the drone.

Push the left stick forward

to increase the altitude or

pull it back to decrease

the altitude.

Moving the stick left rotates the

drone left on its vertical axis

moving the stick right rotates the

drone to the right.

ALTITUDE CONTROL

YAW CONTROL

12 13

Moving the stick forward

makes the drone move

forward, pull back on the

stick to move backwards.

Moving the stick left rotates the

drone left on its horizontal axis

moving the stick right rotates

the drone to the right.

PITCH CONTROL

ROLL CONTROL

Aerobatic Manuevers

More advanced fliers can perform flips and rolls using one of

the transmitter channels for flight modes.

WARNING: Do not perform aerobatic maneuvers near yourself

or other people. You should use a wide open space with

plenty of room to correct any errors that may occur.

Forward and backward rolls: Activate the Flight Mode by

putting the transmitter switch in the active position. Push

the Elevator stick forward to roll forward or pull back on

the stick to roll backwards.

MODE 1

MODE 2

NORMAL FLIGHT MODE

ROLL FLIGHT MODE

Put the FMOD(FMD)

Switch to “0” position:

Put the FMOD(FMD)

Switch to “0” position:

Throttle stick on the right

Throttle stick on the Left

Put the FMOD(FMD)

Switch to “2” position:

Put the FMOD(FMD)

Switch to “2” position:

Left and Right Rolls: Activate the Flight Mode by putting the

transmitter switch in the active position. Push the Aileron stick

left to roll left or push to the right on the stick to roll to the right.

Using the FPV System

The Vektor 280 includes a 400,000 Pixel FPV camera and

*600mw Video Transmitter. In order to use this system, you

need to have some type of receiving device and display

14 15

monitor or goggles. Additionally, both devices must be set to

the same frequency. The following instructions describe how

to set the transmitting frequency on the Vektor 280.

A. Remove the 4 screws that attach the canopy to

the frame.

B. Remove the 8 screws that secure the top frame

C. Set the frequency using the frequency DIP switch

according to the frequency chart on the

following below

CH00 5.725GHz CH16 5.705GHz

CH17 5.685GHzCH09 5.725GHz

CH24 5.740GHzCH08 5.733GHz

CH01 5.745GHz

CH19 5.645GHzCH11 5.790GHzCH03 5.785GHz

CH26 5.780GHzCH18 5.665GHz

CH10 5.771GHz

CH02 5.765GHz

CH25 5.760GHz

CH07 5.865GHz

CH06 5.845GHz

CH05 5.825GHz

CH04 5.805GHz

CH15 5.866GHz

CH14 5.847GHz

CH13 5.828GHz

CH12 5.809GHz

CH23 5.945GHz

CH22 5.925GHz

CH21 5.905GHz

CH20 5.885GHz

CH31 5.880GHz

CH30 5.860GHz

CH29 5.840GHz

CH28 5.820GHz

CH27 5.800GHz

Frequency Chart

D. Check to make sure that the equipment functions

properly and you can receive the images clearly.

E. Replace the top frame and reattach the canopy.

Using the Drone Finder Function

The Vektor 280 has a Drone Finder function that helps you

locateyourdroneshoulditgodowninanareawhereitcan’t

be seen. The following describes how that function is used.

NOTE: You need at least a 6 Channel radio and a receiver

with at least one available PWM channel to use this function.

This feature needs to be assigned to a channel other

than 1 – 5.

Plug the purple wire that is attached to the multi-function

board into an available PWM

channel on your receiver. When

the battery is plugged in, you turn

this channel on and the beeper will

beep, alerting you to the location

of the Vektor 280.

Using the Intelligent LED System

Low Battery Warning

The Vector 280 has a unique LED lighting system that allows

the user to customize the way the LEDs on the bottom of the

drone function. You can change the brightness as well as the

function of the LEDs.

There are 3 brightness

settings and 4 function

settings.

When the battery on the Vektor 280 gets low, the two low

battery warning LEDs on the back of the drone will begin to

flash.Thisindicatesit’stimetoendyourflightandland.

16 17

Replacement Parts

Warranty Service and Repair

61132 - Clear Canopy

61133 - Arm Set Left

61134 - Arm Set Right

61135 - Control Board

61136 - CC3D Flight Controller

61137 - Motor CW

61138 - Motor CCW

61139 - Prop Set (4pcs)

61140 - Camera

ONE YEAR LIMITED WARRANTY For a period of one year

from the date of purchase, HITEC RCD USA, INC. shall

REPAIRORREPLACE,atHITECRCD,INC’soption,

defective equipment covered by this warranty, otherwise

the purchaser and/or consumer is responsible for any

charges for the repair or replacement of the equipment. This

warranty does not cover cosmetic damages and damages

due to acts of God, accident, misuse, abuse, negligence,

improper installation, or damages caused by alterations by

unauthorized persons or entities. This warranty only applies

to the original purchaser of HITEC RCD, INC. products who

purchased and used the products in the United States of

America, Canada and Mexico. Batteries, plastic cases and

gears are not covered by this warranty.

THIS WARRANTY IS IN LIEU OF ANY AND ALL OTHER

WARRANTIES, WHETHER FOR MERCHANTABILITY OR

FITNESS FOR A PARTICULAR PURPOSE AND WHETHER

EXPRESS OR IMPLIED. REPAIR OR REPLACEMENT AS

PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVE

REMEDY. HITEC RCD, INC. SHALL NOT BE LIABLE FOR

ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES

FOR BREACH OF ANY EXPRESS OR IMPLIED WARRANTY

RELATING TO THIS PRODUCT, EXCEPT TO THE EXTENT

PROHIBITED BY APPLICABLE LAW, ANY IMPLIED WARRANTY

OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR

PURPOSE ON THIS PRODUCT IS LIMITED IN DURATION TO

THE DURATION OF THIS WARRANTY.

Some states do not allow the exclusion or limitation of

incidental or consequential damages, or allow limitations on

how long an implied warranty lasts, so the above limitations

may not apply to you. This warranty gives you specific legal

rights, and you may have other rights which vary from

state to state.

Service and Repair Information

To have your Hitec product serviced:

1.Visit the Hitec website at www.hitecrcd.com and download

the service request form (under Support section).

2. Fill out the service request form completely and include a

copy of your original receipt showing the purchase date.

3. Package your product in its original packaging or use

a suspension-type packaging (foam peanuts or crumpled

newspaper). Hitec RCD shall not be responsible for goods

damaged in transit.

4. Ship prepaid (COD or postage-due returns will not be

accepted) via a traceable common courier (UPS, insured

parcel post, FedEx, etc.) to:

Hitec RCD USA, Inc., Customer Service Center,

12115 Paine St., Poway CA 92064

Table of contents

Other Hi-Tec Quadcopter manuals

Hi-Tec

Hi-Tec WEEKENDER Q4I User manual

Popular Quadcopter manuals by other brands

dji

dji MAVIC 2 PRO quick start guide

Autel Robotics

Autel Robotics EVO II Dual 640T quick guide

Carson

Carson X4 NANO instruction manual

Attop

Attop W80 Instructions for use

Alias

Alias 6608 owner's manual

Reely

Reely Drone Copter 2-in-1 operating instructions

Hubsan

Hubsan FPV X4 H107D instruction manual

Falcon

Falcon S2-210 quick start guide

Kaiser Baas

Kaiser Baas KBA15007 user guide

Denver Electronics

Denver Electronics DCH-261 instructions

Craig

Craig INTERCEPTOR owner's manual

Odyssey

Odyssey TURBO RUNNER manual

IMAGINARIUM

IMAGINARIUM droni stream instructions

Hubsan

Hubsan X4 Pro FPV instruction manual

AR.Drone

AR.Drone Parrot VSM user guide

Walkera

Walkera QR X900 quick start guide

dji

dji Phantom 2 Vision + user manual

HobbyZone

HobbyZone Zugo instruction manual