Dolphin® 9500 Series Mobile Computers Quick Start Guide 5
Install the Main Battery Pack
UseonlytheLi-ionbatterypacksprovidedbyHHP.Theuseofanybattery
pack not sold/manufactured by HHP in the Dolphin 9500 Series terminal
will void your warranty and may result in damage to the Dolphin terminal
or battery.
1. Remove the Li-ion battery pack from its
package. Hold the terminal with the front
panel (keyboard) facing down.
2. On the Dolphin 9500, detach the handstrap.
3. Take the battery and insert the end without
the locking tab into the top of the battery well
and push down with a hinging motion until
the locking tab snaps.
To remove the battery pack, detach the
handstrap, press the locking tab on the battery
pack away from the bottom panel, and pull the
battery pack up with a hinging motion.
Charge the Main and Backup Batteries
The power supply for the Dolphin mobile computer consists of two types of
battery power: the main battery pack installed in the back panel and the backup
battery located inside the terminal.
The main battery powers the terminal. The internal backup battery charges off
the main battery, and maintains the application data stored in RAM and the
system clock for up to 30 minutes when the terminal’s main battery pack is
completely discharged or removed.
Before initial use - The terminals are shipped with both batteries discharged of
power. Charge the main battery pack for a minimum of four hours before
initial use.
Forcharging, use a Dolphin9500 Seriesperipheral and thepower cables
provided by HHP. Use of peripherals or cables not sold/manufactured by
HHP will void the warranty and may damage the terminal.
!
Locking tab
!
