Hexagone Quick VAC Classic User manual
www.myhexagone.com • info@myhexagone.com • Tél. +33 1 34 34 11 55
Version UDXYQVCN001-EN
TO BE CONSERVED
Technical manual
Quick
Classic
www.myhexagone.com • info@myhexagone.com • Tél. +33 1 34 34 11 55
SUMMARY
4
5
1. Introduction
2. Safety rules
3. How to install your pool vacuum cleaner Quick Vac?6
6
A. Unpacking
B. Installing the battery or the electric box 7
4. How to use your pool vacuum cleaner Quick Vac? 8
8
8
A. Pool entry
B. Start up
C. Pool exit 9
5. Cleaning and maintenance 10
10
10
10
A. Cleaning of filter
B. Cleaning of the Quick Vac
C. Preventive maintenance
D. Charging the battery 11
126. Usage tips
7. Your warranty 13
13
14
14
14
A. Conditions
B. Duration of the guarantee
C. Purpose of the warranty
D. Transport Damage
E. Compliance
F. Special conditions
14
15
8. Spare parts and technical data 16
A.The vacuum cleaner
B. The trolley and its mounting
Conditions Générales de Vente Hexagone Manufacture S.A.S.
20
With this product you accept in a tacit and irrevocable manner our general conditions of sale. Photos in this technical manual are non-contractual.
3
16
17
www.myhexagone.com • info@myhexagone.com • Tél. +33 1 34 34 11 55
4
1. Introduction
In order to ensure your safety and the validity
of your guarantee, please read carefully and
follow to the letter these instructions.
The manual vacuum cleaner QUICK VAC is the professional device that must be
used only by the qualified pool technicians.
The manual vacuum cleaner QUICK VAC is desiged for regular maintenance of
your pool. It does not replace the filtration system and is used only to suck up
impurities in the bottom of the pool.
It should only be used with equipment recommended by the manufacturer. Any
other use is incorrect.
The manufacturer’s instructions for use, maintenance and repairs must be strictly
adhered to.
This technical manual explains how to install, handle and maintain your manual
vacuum cleaner QUICK VAC .
We strongly recommend that you:
•read this technical manual carefully by following the installation and
operating instructions very precisely step by step to use your manual vacuum clea-
ner QUICK VAC in the best conditions;
•keep this technical manual for the entire life of the product. It might be useful. If
you have any questions regarding the installation and use of your manual vacuum
cleaner QUICK VAC, please call +33 1 34 34 11 55.
www.myhexagone.com • info@myhexagone.com • Tél. +33 1 34 34 11 55
2. Safety rules
WARNING!
• Keep the cleaner out of the reach of children.
• Place the trolley so that the cleaner can reach the furthest corner
of the pool.
• Never let anybody enter the swimming pool during cleaning.
• Never put the trolley into the water, only the cleaner has to go
into the water.
• Avoid working under direct sunlight; place the electric box out
of direct sunlight.
•To avoid any electrical risk, never open the box yourself. Ask for
a qualified person.
• Never pull on the cable.
• Cleaner for industrial purpose only and to be operated by qua-
lified personal.
• Operators must keep their hands away from pump turbine while
the vacuum is connected.
5
Your safety:
Your vacuum cleaner QUICK VAC has been manufactured in accordance with the
highest standards.
To use your equipment safely, observe the following:
• Keep the power supply unit far from the pool so as to prevent any falls.
•In order to avoid any risk of electric shock, never open the electronic control box. Call
a qualified technician.
•Never attempt to repair the power cable. Contact the seller to replace it with the
original spare part to avoid any danger.
www.myhexagone.com • info@myhexagone.com • Tél. +33 1 34 34 11 55
3. How to install your pool vacuum cleaner Quick Vac?
A. Unpacking
Unpack the unit by taking the necessary precautions. Do not use sharp tools (cutter,
knife ...)
Check all items for damage from delivery. If damage is caused from the delivery please
make a note on the delivery slip.
Only the recipient can file a claim with the carrier, you have 48 hours to do so by regis-
tered letter with acknowledgment of receipt. Also please notify us as soon as possible
of the damage.
If your device is not in perfect condition, or if it does not work, notify your dealer im-
mediately and do not try to operate without advice from a qualified or approved repre-
sentative.
We recommend keeping the packaging and the original materials, they will be used for
further transportation.
The Packaging must contain:
•the Quick Vac with its cable and its filter
•its transport trolley (follow enclosed instructions for assembly)
•a pocket with at least the user manual and the bolts for the trolley.
Depending on your buying option your device will be also equipped with:
•Option without power supply
- One empty battery box
•Battery option
- One empty battery box
- One battery
- One charger for battery and a set of lugs (+ and -)
•Option with power supply
- An electrical box for network connection
B. Battery connection
Install lugs on the battery terminals. Take care of polarity - lug + must be installed on
the + terminal of the battery and connected to the red wire - pod - must be installed on
the terminal - battery and connected to the black wire
CAUTION!
Serious damage can be caused to the device if it is run out of
the water, resulting in immediate void of the warrantee.
6
www.myhexagone.com • info@myhexagone.com • Tél. +33 1 34 34 11 55
3. How to install your pool vacuum cleaner Quick Vac?
A. Installing the battery or the electrical box
We remind you that the supply of the battery is to be at your expense or has
been agreed upon the purchase of your device.
Install the lugs on the battery terminals. Take care of polarity:
- the lug + must be installed on the + terminal of the battery and connected to the red
wire;
-the lug - must be installed on the terminal - battery and connected to the black wire.
In the case of a device supplied with electric box, the lastone is portable and therefore
you are free to place it where you want respecting the safety distances of the
standards in force.
Moreover, it is your responsibility not to bring it into the water.
CAUTION!
Serious damage can be caused to the device if it is started out
of the water, which leads to the immediate removal of the
manufacturer's warranty.
7
www.myhexagone.com • info@myhexagone.com • Tél. +33 1 34 34 11 55
4. How to use your pool vacuum cleaner Quick Vac?
A. Pool entry
• The trolley and the power box should be placed so that the robot can reach all
corners of the pool;
•Be sure to unroll the entire self-floating cable at the edge of the pool, avoiding
loops, before entering the unit into the water.
• Install a telescopic handle (adapted to the dimensions of the pool) on the bracket at
the rear of the vacuum, then clip into place (you hear a «click» indicating that the
handle is in place). This will allow you to guide the QUIK VAC during cleaning
operations.
• I• Immerse the cable and the vacuum cleaner in the water, taking care to position
the vacuum cleaner on its wheels. For this operation use the side handle provided for
this purpose.
CAUTION!
Never turn the QUICK VAC out of the water, it may damage the
pump and void your warranty.
B. Start up
Immerse the device first.
Connect the plug to the base of the power supply box, the pump starts immediately.
You can then start to clean your pool.
In case of electrical cabinet:
Make sure the power button is OFF before connecting the AC outlet. You can then
connect the power outlet.
Then immerse the device, plug in the device and press the switch button to turn it
ON. You can then start cleaning.
8
www.myhexagone.com • info@myhexagone.com • Tél. +33 1 34 34 11 55
4. How to use your pool vacuum cleaner Quick Vac?
A. Pool exit
Once the pool is clean at your convenience please follow the following steps:
• Bring the vacuum cleaner back to you by pulling the telescopic handle;
• Unplug the plug and wait a few moments for the check valve closes and the
collected dirt remains trapped. Or if you have a power supply box, press the switch
to the OFF position and unplug the box plug.
•Grasp the handle and pull it to extract the vacuum from the water, when it comes to
the surface, grasp the side handle to pull the QUICK VAC out of the water.
• Position the Quick Vac on the trolley, proceed with cleaning the filter (see next
paragraph),
•Store the cable by wrapping it on the arms provided for this purpose on the trolley.
It is advisable to wind the cable starting with the part near the vacuum and ending
with the plug, this precaution allows any loops to be discarded by themselves.
In case of electrical box, please store it away from the weather
CAUTION!
Never pull the Quick Vac out of water by the cable.
9
www.myhexagone.com • info@myhexagone.com • Tél. +33 1 34 34 11 55
5. Cleaning and maintenance
A - Cleaning of filter
IMPORTANT!
The filter bag must be cleaned after each use.
• Remove the filter from the Quick Vac.
• Put the bag upside down to empty theany largest debris
• Wash the filter under a tap or use a hose to spray.
• Put the filter back on the Quick Vac for storage
ECOLOGICAL IDEA:
Prefer cleaning in a bucket of water, 15 or 20L of water should
be enough.
Note:
We recommend changing the filter bag regularly for the assurance of optimum cleaning.
IMPORTANT!
Never operate the vacuum cleaner if the filter is damaged or
the elastic has relaxed.
B - Cleaning of the Quick Vac
The submersible part should be cleaned with clean water and you should check and
possibly remove debris caught in the propeller.
No mechanical parts require any external lubrication or maintenance.
C - Preventive maintenance
10
IMPORTANT!
All the cleaning and inspection must be carried out with the
cable unplugged.
www.myhexagone.com • info@myhexagone.com • Tél. +33 1 34 34 11 55
5. Cleaning and maintenance
To ensure the efficiency of your QUICK VAC, it is important to check the below
every week:
• The state of the turbine, check there is no debries in the propeller, you can
remove turbine by unscrewing its locating block. Be careful not to lose the turbine
pin.
• Check filter and elastic retainer inside the filter.
• Inspect the swivel wheels, make sure that nothing prevents their movement.
•Unroll the cable at the edge of the pool to make sure that it is not twisted and form
loops.
• Finally, check the general appearance of the vacuum cleaner, screws, the pressure
of the tires of the trolley, the state of the filter, possible impacts on the body...
•Check the condition of the check valve.
• Check levels of distilled water in the compartments of the battery, top up if
necessary.
D - Charging the battery
The battery that we advise is a battery 12 VDC 32A. It allows you 3 hours of battery life.
Charge as soon as you notice a decline in power. To increase the battery life we recom-
mend you do not let it fully discharge and ensure full charge each time.
CAUTION!
Do not use a charger larger than 6 amp. Charged often and
slowly, a battery will last longer.
The battery contains sulfuric acid which can cause severe
burns. Avoid contact with eyes or skin.
The charge of the battery can release more or less
dangerous gas emissions.
Take care to charge the battery in a ventilated room free
from flame.
11
Keeping your Quick Vac in perfect condition is a guarantee of
its longevity.
Other manuals for Quick VAC Classic
1
Table of contents
