HETRONIC FBTX-01 User manual
Exhibit H: Users Manual
Hetronic
Transmitter FBTX-01
FBTX-01 Users Manual
FCC ID: LW9 FBTX-01
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
1. This device may not cause interference, and
2. This device must accept any interference, including interference that may cause
undesired operation of the device.
Note: No user modifications to the device are allowed.
The FB-TX-04 is a modular narrow band transmitter, which transmits FSK
signals to the FB-RX04 receiver at a maximum rat of 4800 bps. The FB-TX01 operates at
915.700MHz with a maximum output power of 3mW ±1mW. The maximum and
minimum pulse widths are 208µS and 20ms respectively. The supply voltage range is 3-
12V with a draw of 20mA.
The FB-TX01 has three main connectors. The first, X1 should be connected to a
50 Ohm impedance antenna designed for the frequency in use. The second connector
inputs ground (GND) and transmit disable (TX-Off). The third connector supplies the
power (VCC), TTL signal (TTL), and Ground.
Connector Layout for FB-TX01
The actual labeled and assembled unit will look similar to the one pictured below:
Assembled FB-TX01
Table of contents
Other HETRONIC Transmitter manuals
HETRONIC
HETRONIC ERGO-F 2.4 GHz User manual
HETRONIC
HETRONIC ERGO-F 2.4 GHz User manual
HETRONIC
HETRONIC NOVA-M User manual
HETRONIC
HETRONIC NOVA XL User manual
HETRONIC
HETRONIC NOVA-L User manual
HETRONIC
HETRONIC ERGO-F 2.4 GHz Instruction Manual
HETRONIC
HETRONIC MINI User manual
HETRONIC
HETRONIC NOVA L Instruction Manual
HETRONIC
HETRONIC NOVA Series User manual
HETRONIC
HETRONIC NOVA XL User manual
Popular Transmitter manuals by other brands
Dejero
Dejero EnGo 3x manual
Rosemount
Rosemount 4600 Reference manual
Speaka Professional
Speaka Professional 2342740 operating instructions
trubomat
trubomat GAB 1000 instruction manual
Teledyne Analytical Instruments
Teledyne Analytical Instruments LXT-380 instructions
Rondish
Rondish UT-11 quick start guide
