HERA VT50 User manual
INDEX
www.heraled.com
Index V.1.3
www.heraled.com
Congratulations on choosing a HERA product!
We thank you for your custom.
Please note that this product, as all the others in the rich HERA range, has been designed and made with total quality to ensure excellent
performance and best meet your expectations and requirements. Carefully read this instruction manual in its entirety and keep it safe for
future reference. It is essential to know the information and comply with the instructions given in this manual to ensure the fitting is
installed, used and serviced correctly and safely. HERA disclaims all liability for damage to the fitting or to other property or persons
deriving from installation, use and maintenance that have not been carried out in conformity with this instruction manual, which must
always accompany the fitting. HERA reserves the right to modify the characteristics stated in this instruction manual at any time and
without prior notice.
Connection Diagram
1
Block Diagram
5
6
7
Marking
2Safety Information
Warranty
Explanation
Details
3
4
Cover & Index
Installation Instruction
Back Cover
Block Diagram 11
8Installation Instruction
9Accessories
Ordering Information
Technical Drawing
10
3D VERTICAL TUBE SERIES
User’s Manual & Installation Guide
R
Safety Information
Warranty
Caution – unplug the power supply from the main power before connecting any cables as this can damage the products.
Caution – avoid looking directly into the led light source at close range for your own safety.
Any people installing this product should comply with local standards and regulations and must be qualifed for the handling of
electrical equipment.
• Do not attempt to install or use the product until installation instructions and safety labels are fully understood.
This product is designed for indoor and outdoor usage.
• Ensure product operates within the specifed temperature range.
• Do not attempt to open the product.
• Do not use the product if the power cables are damaged.
• Only use product for specifed voltage.
• Always maintain connection to ensure waterproofing.
• If the product has been subjected to drastic temperature variances, for example, following transportation,
do not connect the fixture until it has reached room temperature, as moisture condensation may cause electric
shock and product damages.
• When installing the products and system power supplies, please ensure they will not be exposed to moisture and extreme heat
(and direct sunlight for outdoor products). Besides, keep a clean operating environment for the fixtures and system power supplies..
• Any non-compliance of the Installation Guide will void the Hera warranty.
Hera warrants the products for a period of three (3) years from date of purchase, provided that
the purchased items are used under the conditions stated in this user manual.
Marking
DMX
RDM
65
Please study this Installation Guide thougly and check the lates Tecnical Specification Sheets available from the
Our website www.heraled.com before setup.
3D VERTICAL TUBE SERIES
R
www.heraled.com 2
www.heraled.com
Details
Hera 3D Vertical Tube® Series consist of four models such as 50-100-150-200cm. VT50 14 pixel 42 Channel, VT100 28 Pixel 84 Channel,
VT150 42 Pixel 126 Channel, VT200 56 Pixel 168 Channel. Pixel pitch is 35 mm. Each pixel consists of 1 led. It is in IP65 protection class. It
offers customizable solutions pixel mapping with DMX 512 protocol. It can be addressed in batch with RDM Protocol. It is designed to use
in stage and entertainment illumination. It operates with 48V voltage and applicable without voltage loss. Product assembly apparatus is
designed in Push-Lock type. It remains stable and safe. It has high vibration resistance. It is easily demountable. IP68 is screwed on the
chassis type connector and additional connections can be made with T cable in the accessories. It is recommended to use with Power
Pack 320 and Power Pack 2500 as a feeding unit.
• 360 degree angle viewing with double sided light effects
• Best graphic viewing with each led independent control
• Addressing with Remote Device Management Protocol
• Safe use with Push-Lock assembly apparatus
• Safe use in interior and external environment with IP65 protection
Explanation
Light Source : 28/56/84/112 Pcs. Nichia NSSM032A
Lifetime : 3 or 5 step MacAdam ellipse
50.000 Hours
Input : 48VDC
4-Pin IP67 Waterproof Connector (Power + DMX)
Current Consumption : 190/350/520/650 mA
Power Consumption : 9/17/25/32 Watt
Pixel Pitch : 35mm
Luminous Intensity : Luminous intensity, calibrated mode: 35/70/105/140 cd per side
Total output, calibrated mode: 105/210/315/420 lm per side
Total output, calibrated mode: 1162/2324/3486/4648 nits per side
* Preliminary data, figures are approximate.
Control and Programming : DMX 512
DMX Channels : 42/84/126/168 Ch.
14/28/42/56 Pixel
DMX Address Settings : RDM (Group of Remote Addressable Systems
Housing : Plastic Extrusion Polycarbonate Body
Screw and Mounting Accessories : Die-Cast Plastic Installation Equipment
304L Stainless Steel
Temperature : Operating : -40°C - 50°C - (-40° - 122° F)
Storage : -40°C - 85°C - (-40°C - 185° F)
Dimensions (H x W x D) : 30x500 mm ( 1,18x18,68 in) 30x1000 mm ( 1,18x39,37 in)
30x1500 mm ( 1,18x59,05 in) 30x2000 mm ( 1,18x78,7 in)
Weight : 0,175kg (385 lb) / 0,275kg (606lb) / 385kg (848lb) / 495kg (1091lb)
Certification : EU safety: EN 60950-1, EN 60950-22
EU EMC: EN 55022, EN 55024, EN 61000-3-2, EN 61000-3-3
US safety: UL 60950-1, UL 60950-22
US EMC: FCC Part 15 Class A
3D VERTICAL TUBE SERIES
R
www.heraled.com 3
www.heraled.com
Ordering Information
VT50-RGB 3D Vertical Tube® 42Ch. 14Pixel P01040085
VT100-RGB 3D Vertical Tube® 84Ch. 28Pixel P01041085
VT150-RGB 3D Vertical Tube® 126Ch. 42Pixel P01042085
VT200-RGB 3D Vertical Tube® 168Ch. 56Pixel P01043085
INDOOR ZONE
INDOOR ZONE
Block Diagram
Outdoor Zone
POWERDMX OUTDMX INUSB
DMX Signal
8
Any device which supports Art-Net to DMX 512 or USB Interface
Please Check MADRIX Web Site
Minimum Computer System Requirements
Art-Net
Power Pack 2500
VT100-RGB 3D Vertical Tube®100cm
Maximum in Chain 6 pcs
VT150-RGB 3D Vertical Tube®150cm
Maximum in Chain 4 pcs
VT200-RGB 3D Vertical Tube®200cm
Maximum in Chain 3 pcs
VT50-RGB 3D Vertical Tube®50cm
Maximum in Chain 12 pcs
www.heraled.com 4
www.heraled.com
3D VERTICAL TUBE SERIES
R
Connection Diagram
Connection Diagram
Connection Diagram Indoor Zone
Block Diagram
Outdoor Zone
POWER
DMX OUT
DMX IN
USB
DMX Signal
8
Any device which supports Art-Net to DMX 512 or USB Interface
Please Check MADRIX Web Site
Minimum Computer System Requirements
Art-Net
UL / cUL
L
N
L
N
RISK OF
ELECTRIC
SHOCK
90~264VAC 50/60Hz
Red
(+)48VDC
Black
GND
White
DMX (+)
Blue
DMX (-)
VT100-RGB 3D Vertical Tube®100cm
Maximum in Chain 6 pcs
VT150-RGB 3D Vertical Tube®150cm
Maximum in Chain 4 pcs
VT200-RGB 3D Vertical Tube®200cm
Maximum in Chain 3 pcs
VT50-RGB 3D Vertical Tube®50cm
Maximum in Chain 12 pcs
www.heraled.com 5
www.heraled.com
3D VERTICAL TUBE SERIES
R
Connection Diagram
Red (+48V) Red (+48V)
Black (GND) Black (GND)
White (DMX+)
Input Output
White
DMX (+)
Blue
DMX(-)
Red
(+)48VDC
Black
GND
4
12
Assemble bracket and body of product
Connection diagram as shown at figure 4
www.heraled.comwww.heraled.com
www.heraled.com 6
3D VERTICAL TUBE SERIES
R
Turn right body of product 3Keep constant bracket and pull body of product
Blue (DMX-)
White (DMX+)
Blue (DMX-)
Installation Instruction
1Pass connector through the bracket as shown at figure 1
3
Step Description
2Assemble connector and body of product as shown at figure 2
Screw body of product and finished installation as shown at figure 3
1
2
3
www.heraled.com 7
www.heraled.com
3D VERTICAL TUBE SERIES
R
Installation Instruction
www.heraled.com 8
www.heraled.com
3D VERTICAL TUBE SERIES
R
1
23
1Pass connector through the bracket as shown at figure 1
3
Step Description
2Assemble connector and body of product as shown at figure 2
Screw body of product and finished installation as shown at figure 3
Accessories
A01007
A01006
60cm 4 Pin T Cable & Connector
Optional Optional
650mm/25"
300mm/12" 300mm/12"
1200mm/59"
120cm 4 Pin T Cable & Connector
A01024
4 Pin Female IP67 Cable & Connectors
Optional
200mm / 8"
16mm/0,6"
A01025
4 Pin Male IP67 Cable & Connector
Optional
200mm / 8"
16mm/0,6"
A01031
Injector Y Cable
Optional
16mm/0,6"
450mm / 17,7"
A01032
2 Pin Male IP67 Data Connector
Optional
200mm / 8"
16mm/0,6"
www.heraled.com 9
www.heraled.com
3D VERTICAL TUBE SERIES
R
A01037
2meter Leader Jumper Cable
A01038
5 meter Leader Jumper Cable
Optional
A01039
10 meter Leader Jumper Cable
Optional
A01040
15 meter Leader Jumper Cable
16mm/0,6"
16mm/0,6"
16mm/0,6"
16mm/0,6"
16mm/0,6"
16mm/0,6"
16mm/0,6"
16mm/0,6"
2meter/78" 5 meter/196"
Optional
Optional
10 meter/393"
15 meter/590"
A01041
20 meter Leader Jumper Cable
16mm/0,6"
16mm/0,6"
Optional
20 meter/787"
500mm / 18.68"
1000mm / 39.37"
1500mm / 59.05"
2000mm / 78.07"
30mm
1.37"
Technical Drawing
VT100-RGB 3D Vertical Tube® 84Ch. 28Pixel
VT50-RGB 3D Vertical Tube® 42Ch. 14Pixel
VT150-RGB 3D Vertical Tube® 126Ch. 42Pixel
VT200-RGB 3D Vertical Tube® 168Ch. 56Pixel
www.heraled.com
www.heraled.com
www.heraled.com
www.heraled.com 10
3D VERTICAL TUBE SERIES
R
35mm
1.18"
This manual suits for next models
3
Table of contents
Other HERA Dj Equipment manuals
HERA
HERA Proline RGBW Series Installation and operating instructions
HERA
HERA PROCOLOR 35 RGB SERIES Installation and operating instructions
HERA
HERA Proline RGB Series Installation and operating instructions
HERA
HERA PD60 Pixel Dot Installation and operating instructions
HERA
HERA POWER PACK 320 User manual
HERA
HERA PROCOLOR 60 RGBW SERIES Installation and operating instructions
HERA
HERA Procolor 10R Red 10W Flood Light Medium Beam User manual
HERA
HERA P03001 Series Installation and operating instructions
HERA
HERA 3D VERTICAL TUBE RGB SERIES Installation and operating instructions
HERA
HERA PROLINE RGBA Series Installation and operating instructions
