HEPER PRIFMA ML EVO 2 Installation and operating instructions

1/3 2022-1 / 27/01/2022

Installation & Maintenance

Instructions

HEPER USA LLC

W227 N546 Westmound Drive Waukesha, 53186

Wisconsin, United States

+1 262 888 0262

[email protected]

PRIFMA ML EVO 2 Module (LL2042.682-US)

53.3 lbs (10'), 65.38 lbs (13')

https://heperlighting.com/us/ll2042.682-us/

2/3

3/3

English ( USA )

Safety

- The product must be installed in accordance with applicable

NEC standards by a qualified electrician familiar with the

installation of exterior lighting fixtures.

- The product must be operated under specified voltage at all

times.

- Do not install if parts are damaged.

- Power must be disconnected while installing or servicing to

avoid electrical shock.

- Failing to comply with warnings and installation steps in this

document might void warranty.

- Do not touch the light source.

- Make sure that temperature of the product is at a safe level before

touching.

- Do not allow cables to touch sharp edges of metal parts or other sharp

objects to avoid damage or abrasion.

- Check all of the cable connections including grounding before

powering the product.

- Check the proper grounding of the metal housing before powering the

product.

- Only use the product for its intended purposes.

- Do not use accessories not approved or recommended by

HEPER.

- Replace any broken/cracked protective surface with a new

one

Installation

- The surface on which the product will be mounted must be flat and

level

- Assemble the product base using the provided or appropriate

hardware.

- Place the base of the product centered onto the concrete base and

secure the bolts as shown on the visual.

- Make the external power line connection as shown on the visual.

Replacement of the light source

- Disconnect the power coming into the product.

- Remove the light source from the head and unscrew it from the

backplate.

- Reinstall the product following the same steps.

Replacement of the control gear

- Disconnect the power coming into the product.

- Disassemble the product head.

- Remove the plate to gain access to the driver location.

- Remove the driver holder.

- Unscrew the driver holder from the housing to be able to pull it out

from the product.

- Detach the driver and place the new one.

- Reinstall the product following the same steps.

- The completed product installation should be as shown on the visual.

Cleaning - Maintenance

- The product was designed and manufactured to operate for a long

period of time. To ensure maximum lifespan of the product, regular (i.e.

every six months) visual inspection and cleaning with a solvent-free

cleaner using a soft cloth is recommended.

- Do not clean or service while the product is power connected.

Disposal

- In accordance with EU Directive WEEE (Waste Electrical and

Electronic Equipment), luminaires must not be disposed of with

other household waste. At the end of their life, luminaires must

be taken to the appropriate local facility available for the

disposal or recycling of electronic products.

Wiring Color Codes

- Ground - GREEN

- Line - BLACK

- Neutral - WHITE

- Dim(+) - RED/PURPLE

- Dim (-) - GRAY/ORANGE

Disclaimer

- HEPER reserve the right to make technical and design changes.

This manual suits for next models

Other HEPER Lighting Equipment manuals

HEPER

HEPER TERRA LP4024.539-EN Installation and operating instructions

HEPER

HEPER MINIKA 90 Installation and operating instructions

HEPER

HEPER DOMINO ML EVO 1 Installation and operating instructions

HEPER

HEPER KREIS Installation and operating instructions

HEPER

HEPER LL2036.758-US Installation and operating instructions

HEPER

HEPER AQSA 0.5 Installation and operating instructions

HEPER

HEPER DRAGO Forward Duo Installation and operating instructions

HEPER

HEPER PRIFMA ML EVO 1 Duo Installation and operating instructions

HEPER

HEPER C-LIGHT Manual

HEPER

HEPER PINUS 360 2 Module Installation and operating instructions

HEPER

HEPER AQSA 1 m Installation and operating instructions

HEPER

HEPER AQSA 0.3 m Installation and operating instructions

HEPER

HEPER LL2044.682-EN Installation and operating instructions

HEPER

HEPER TILA S AFX 1 Module Installation and operating instructions

HEPER

HEPER TURA LL2036.753-US Installation and operating instructions

HEPER

HEPER GOLEDO-T 16 Installation and operating instructions

HEPER

HEPER DOGO Installation and operating instructions

HEPER

HEPER D-LIGHT AFX 5 Installation and operating instructions

HEPER

HEPER KREIS C Installation and operating instructions

HEPER

HEPER VERTEX 1 Installation and operating instructions

HEPER

HEPER LB6048.575-EN Installation and operating instructions

HEPER

HEPER DRAGO Side Duo Installation and operating instructions

HEPER

HEPER MINIMO 3x90 Installation and operating instructions

HEPER

HEPER GOLEDO-T 32 LED Installation and operating instructions

Popular Lighting Equipment manuals by other brands

Brizo

Brizo 8SP-MU-4 manual

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 installation instructions

IKEA

IKEA BJÖRKSPIREA manual

Laserworld

Laserworld Evolution Series ES-400RGB manual

Alien

Alien RG STAR user manual

EuroLite

EuroLite LED B-40 user manual

Qazqa

Qazqa Suplux SL 3 Black 103062 instruction manual

Commercial Electric

Commercial Electric 54568141 Use and care guide

CREE LIGHTING

CREE LIGHTING 304 Series installation instructions

Goobay

Goobay 49867 user manual

ECOMAN ITALIA

ECOMAN ITALIA LED T8 instruction manual

Alkalite

Alkalite Krypton KT-81 user manual

Clas Ohlson

Clas Ohlson GU10 manual

DTS

DTS DELTA 10 F user manual

ring

ring Solar Steplight manual

One Stop Gardens

One Stop Gardens 57696 Owner's manual & safety instructions

Chauvet DJ

Chauvet DJ COREpar UV120 ILS user manual

SIREM

SIREM Swimeo A2 instructions