hentech HT2110C User manual
+12VDC
--12VDC
Electric
Lock +
Electric
Lock --
Interphone
signal+
Interphone
signal--
Instruction for Access Controller
N
N
No
o
o
K
K
Ke
e
ey
y
y,
,
,
N
N
No
o
o
F
F
Fu
u
us
s
ss
s
s,
,
,
I
IId
d
de
e
ea
a
as
s
s
f
f
fo
o
or
r
r
l
lli
iif
f
fe
e
e
HT2110C
Manufacturer: Hentech Technology Development Co., LTD
Add: Xinmin Industrial Zone, Longzhou Road, Lunjiao Town, Shunde District,
Foshan City, Guangdong, China 528308
Export Department: +86-757-27332335/27332339
Technical Support: +86-757-27333890
Fax: +86-757-27332330
URL：www.hentech.cn
1. Product Description
1.1 Connection Pins:
+12V：DC +12V
GND：Ground Line
LOCK+：Electric Lock +
LOCK-：Electric Lock -
L+：Speaker signal +
L-：Speaker signal ¨
1.2 Parameter:
Input voltage：DC12V
Working Temperature：-30℃~+70℃
Reading distance：>5cm
Reading speed：<0.5seconds
1.3Inside Jumper：
The default status of the electric lock connecting to HT2110C is always closed.
Connection Pins S 3 S 1
S 2
When S3-1 is switched to ON, the lock becomes always opened.
2. Instruction：
2.1 Power connection
Connect positive pole of the power supply to +12V and negative pole to GND. After
turning on the power, the device beeps three ¡di¡.
2.2 Initialize the device
A. Press and hold S2 for 1 second. It will emit a short sound ¡di-¡.
B. Keep holding the S2 button for 5 seconds, then it will emit a long sound ¡di-----¡.
C. Release the S2 button, after 2 seconds it will emit 2 sounds ¡di---di---¡, it
indicates that all cards including Management Card, Setup Card and User Cards are
deleted.
2.3 Make a Management Card
A management card has the authorization to add setup cards.
A. Press and hold S2 button for 1 second.
B. After you hear a sound ¡di---¡, release the S2 button then you will hear a long
sound ¡di-------¡.
C. Then pass a new card (only one card), and you will hear a long sound ¡di------¡
and a short sound ¡di----¡. It indicates the success of making the Management
Card.
D. Two seconds later, you will hear three short sound ¡di----¡ which means the
operation is finished.
2.4 Add a Setup Card
A. Read the Management Card once.
B. After a long sound ¡di------¡, read a new card to be Setup Card (this operation
should be in 6 seconds).
C. After that, wait 6 seconds for the device to finish the operation.
D. If want to add more setup cards, please repeat step B.
Notice: It can make 126 pieces of Setup Cards.
2.5 Add a Mess-User Setup Card
Notice: It can only add two Mess-User Setup Card
A. Read the Management Card twice.
B. After a long sound ¡di------¡, read a new card to be Setup Card (this operation
should be in 6 seconds).
C. After that, wait 6 seconds for the device to finish the operation.
D. If want to add the other setup cards, please repeat step B.
2.6 Add a User Card
A. Read a Setup Card or once a Mess-User Setup Card.
B. After a long sound ¡di------¡, read a new card to be User Card (this operation
should be in 6 seconds).
C. After that, wait 6 seconds for the device to finish the operation.（Each Setup
Card can only add 8 User Cards and each Mess-User Setup Card can make
up to 200 User Cards.）
D. If want to add more setup cards, please repeat step B.
2.7 Add a User Card
A. Read a Setup Card once.
B. After a long sound ¡di------¡, read a new card to be User Card (this operation
Should be in 6 seconds).
C. After that, wait 6 seconds for the device to finish the operation.（Each Setup
Card can only add 8 User Cards）, and each Unit Setup Card can make up to
200 User Cards.）
D. If want to add more setup cards, please repeat step B
The relationship about Management Card, Setup Card, Mess-User Setup Card and User
Card
1
2
ON
S3
2.8 .Delete a Group¡s User Card
Each Setup Card can delete its group¡s User Card, but can not delete other groups¡.
A. Read a Setup Card 3 times continuously.
B. After a long sound ¡di------¡, all the User Cards belongs to this group will be
deleted.
2.9 Add a new Setup Card
If lost a Setup Card, please use the following steps to add a new one.
A. Prepare two User Cards that belongs to the same Group. For example,
The two User Cards belong to Group 1.
B. Read a User Card first, it will emit a sound ¡di---¡.
C. Next, read the other User Card within 5 seconds, it will emit a long sound
¡di------¡.
D. Then read a new card that is to be Setup Card of Group 1. This card will
Be Setup Card.
S 2 Button
Management Card
Group 1
User Card 1-1
User Card 1-2
User Card 1-3
User Card 1-4
User Card 1-5
User Card 1-6
User Card 1-7
User Card 1-8
Group
User Card 126-1
User Card 126-2
User Card 126-3
User Card 126-4
User Card 126-5
User Card 126-6
User Card 126-7
User Card 126-8
Setup Card
Group 2
User Card 1
-
1
User Card 1
-
2
User Card 1
-
3
User Card 1
-
4
User Card
-----
User Card
-----
User Card
-----
User Card 1
-
200
User Card
-----
User Card
-----
User Card 2
-
1
User Card 2
-
2
User Card 2
-
3
User Card 2
-
4
User Card
-----
User Card
-----
User Card
-----
User
Card 2
-
200
User Card
-----
User Card
-----
Mess
-
User Setup Card
Group 1
Group 2
