3 Safety instructions
In addition to the general rules for handling electrical equip-
ment, the following safety precautions must be observed.
Read and observe the below listed information before initial
operation of the equipment.
Supply a copy of the safety precautions when selling, leasing, or
otherwise distributing this equipment.
ATTENTION!
Improper handling of the device, non-compliance with the safety
hints below, or tampering with the safety features can cause
property damage, bodily injury, electric shock, or even death.
The compact ash unit Expert D 500/1000 is intended for
professional use inside the studio. It is only to be used with the
accessories described in this manual and approved by Hensel-
Visit.
The equipment may not be used for any other purpose than
described above, especially not for other electrical applications.
Set-up and initial operation
• Do not use ash units in explosive environments.
• Before connecting the equipment to the power supply, make
sure that the mains voltage corresponds to the specications
listed on the unit’s specication plate.
• Compact ash units and generators must only be connected
to grounded power supply systems.
• Check the protective conductor function of the power supply
before initial use.
• Only use plugs/connectors with awless contacts. Burned or
corroded plug contacts can cause res. Defective plugs can
cause substantial damage to the plug socket.
• Do not connect accessories from other manufacturers, even
when these look similar or alike.
Normal use
Abnormal use