HEMRO Anfim Luna User manual

ORIGINAL INSTRUCTIONS

LUNA

ON DEMAND

PROFESSIONAL GRINDER

WWW.ANFIM-MILANO.COM

Luna | EN

Contents

Overview.. ... ... ... ... ... ... ... ..3

Scope of delivery... ... ... ... ... ..4

General Information ... ... ... ... ..5

Reading and retaining

the original instructions . ... ... ... ... ... .5

Explanation of symbols used.. ... ... ... .5

Safety... ... ... ... ... ... ... ... ... ..6

Intended use ... ... ... ... ... ... ... ... ... .6

Safety information ... ... ... ... ... ... ... .6

Before putting into service ... ... ..9

Function .. ... ... ... ... ... ... ... ... ... ... .9

Check the grinder

and scope of delivery ... ... ... ... ... ... .9

Setting up and connecting the grinder... .9

Inserting the bean hopper . ... ... ... ...10

Setting up the portafilter support

and spout ... ... ... ... ... ... ... ... ... ...10

Operation . ... ... ... ... ... ... ... 11

Filling with espresso beans ... ... ... ...11

Switching on the grinder... ... ... ... ...11

Adjusting the grinding degree ... ... ...12

Setting or changing the

recipe/grinding time ... ... ... ... ... ...12

Grinding espresso beans .. ... ... ... ...12

Interrupting the grinding procedure

(break function) ... ... ... ... ... ... ... ...13

Changing the espresso bean type .. ...13

Touchscreen/settings menu . ... 14

Symbols.. ... ... ... ... ... ... ... ... ... ...14

Opening and using

the settings menu . ... ... ... ... ... ... ...15

Cleaning... ... ... ... ... ... ... ... 16

Cleaning the grinder

installation surface ... ... ... ... ... ... ...16

Cleaning the housing ... ... ... ... ... ...16

Cleaning the bean hopper ... ... ... ...17

Cleaning the spout system. ... ... ... ...17

Cleaning the grinder mechanism ... ...18

Troubleshooting.. ... ... ... ... ... 19

Technical data ... ... ... ... ... ... 21

Disposal ... ... ... ... ... ... ... ... 22

Disposing of the packaging... ... ... ...22

Disposing of the grinder ... ... ... ... ...22

Maintenance and service ... ... 22

Luna | EN

Overview

7 6

Luna | EN

Scope of delivery

No. Designation

1 Bean hopper (with lid)

2 Bean hopper intake

3 Grind adjustment system

4 Power cable (with power plug)

5 Spout guide

6 On/Off switch

7 Release button (Thermal overcurrent circuit-breaker)

8 Screw for adjusting the portafilter support (left and right), 2×

9 Drip tray

10 Portafilter support

11 Trigger switch

12 Portafilter intake

13 Spout

14 Touchscreen

15 Grinding degree scale

16 Sliding valve

Luna | EN

General Information

Reading and retaining the original instructions

Before you start using the Single Espresso Grinder Luna, read the original

operating manual and safety information carefully. Only then will you be

able to use the Single Espresso Grinder safely and without danger.

This operating manual is based on the standards and regulations in

force in the European Union. Please also note the guidelines and laws of your specific

country if abroad.

For reasons of clarity, the Single Espresso Grinder Luna will only be referred to as

"grinder" in the following.

Keep this operating manual for future reference. Also pass on these original operat-

ing instructions to subsequent owners and users of the grinder.

Explanation of symbols used

The following symbols and signal words are used in these original operating instruc-

tions and may be used on the grinder or on the packaging if necessary.

WARNING!

This signal word/symbol indicates a hazard with a medium degree of risk which can

lead to death or serious injury if not avoided.

CAUTION!

This signal word/symbol indicates a hazard with a low degree of risk which can lead

to minor or moderate injury if not avoided.

NOTE!

This signal word warns of possible material damage.

This symbol indicates important information concerning operation or

handling.

Declaration of Conformity: Products marked with this symbol fulfil all

applicable community provisions of the European Economic Area.

UKCA seal of approval: Products marked with this symbol meet the

requirements of electrical product safety in the United Kingdom.

Luna | EN

ETL Listed seal of approval: Products marked with this symbol meet the

requirements of electrical product safety in the United States of America.

Products marked with this symbol meet the criteria required by the NSF

(National Sanitation Foundation) regarding cleanliness and hygiene

in the food industry.

Products marked with this symbol are only permitted for use indoors.

This symbol indicates an electrical shock hazard.

This symbol indicates that the grinder conforms to protection class I.

Safety

Intended use

The grinder is only suitable for grinding whole roasted espresso beans. Do not use

the grinder to grind other products or objects. The grinder is intended for commercial

use, e.g.in commercial enterprises, restaurant kitchens, canteens and hospitals, but

not for continuous mass production (continuous operation). The grinder may only be

serviced by trained personnel. However, it may be operated by other persons in a

place where its use is supervised.

Any other use is not considered to comply with the intended use and can result in

material damage or even personal injury.

Do not make any changes to the grinder. The manufacturer or supplier cannot be held liable

for any injury or damage resulting from the failure to comply with the safety instructions.

Safety information

WARNING! Danger of electric shock!

Improper use, incorrect electrical installation or an excessively high voltage can all

lead to electric shock.

» Connect the grinder only if the mains voltage of the socket complies with the infor-

mation indicated on the type plate.

» Connect the grinder only to a socket with good accessibility, so that you can dis-

connect it quickly from the power supply in the event of a fault.

Luna | EN

» Do not use the grinder if you notice any visible damage or if the power cable or

plug is faulty.

» If the grinder power cable is damaged, it must be replaced by the manufacturer

or by qualified personnel, in order to avoid hazards.

» Only connect the grinder to a power supply with a 16 A-slow-blowing fuse. Have

a 16 A-slow-blowing fuse installed by a qualified electrician if the power connec-

tion at the grinder installation site is not protected in this way.

» Always switch off the grinder (On/Off switchin the 0 position) before you remove

the power plug.

» Only install the grinder at places where the handling of the grinder can be super-

vised by trained personnel.

» Do not operate the grinders above 2,000 metres.

» Do not immerse the grinder or the power cable or power plug in water or any

other liquids.

» Do not clean the grinder with a water jet.

» Do not clean the grinder with compressed air (e.g. with a compressed air gun).

» Never touch the power plug with wet hands.

» Never unplug the power plug from the wall socket by pulling on the power cable;

always grip the plug itself.

» Never use the power cable as a handle to carry the grinder.

» Keep the grinder and power cable/power plug away from open flames and hot

surfaces.

» Position the power cable in such a way that it does not become a trip hazard.

» Do not bend the power cable and do not place it over sharp edges.

» Use the grinder in indoor areas only. Never operate the grinder in damp rooms

or in the rain.

» Keep children away from the grinder.

» Ensure that children do not insert any objects into the grinder.

» If you are not currently using the grinder, if you are cleaning it or if a fault occurs,

switch the grinder off and remove the power plug from the socket.

» Do not open the grinder casing; leave repairs to the experts. If repairs are required,

please contact a specialist workshop. In the event of unauthorised repairs, faulty

connection or incorrect operation, all liability and guarantee claims are excluded.

Only parts that comply with the original appliance specifications may be used for

repairs. This grinder contains electrical and mechanical parts that are essential for

protection against potential hazards.

Luna | EN

WARNING!

Danger for children and persons with reduced physical, sensory or mental capabil-

ities (e.g. partially disabled persons, older persons with limited physical and mental

capabilities) or a lack of experience and knowledge (e.g. older children).

» This grinder may be used by children older than eight years and by persons with

reduced physical, sensory or mental capabilities or a lack of experience and

knowledge if they are supervised or have been instructed in the safe use of the

grinder and have understood the possible resulting dangers. Children may not

play with the grinder. Cleaning and user maintenance may not be carried out by

children without supervision.

» Do not leave the grinder unsupervised when in operation.

» Do not let children play with the packaging film. Children can become entangled

in it while playing and may suffocate.

» Do not let children play with the small parts. These can be life-threatening if

swallowed.

WARNING! Risk of injury!

Accidentally reaching into the rotating grinding discs can cause serious injuries.

» Do not under any circumstances reach into the grinder or grinder outlet from

above with bare fingers.

» Do not insert any objects into the grinder.

» Always switch off the grinder and disconnect the power plug from the socket

before starting to clean and maintain the grinder.

CAUTION! Risk of tipping and injury!

Incorrect setup of the grinder can result in injury.

» Position the power cable so that nobody can become entangled in it and cause

the grinder to fall.

» Place the grinder on a level and stable surface to prevent it from falling off.

Luna | EN

Before putting into service

Function

The shot sizes, i.e. the grind quantities per reference, are defined by the grinding

time in this grinder.

The user can specify up to five different recipes (grinding times) and also has the

option of controlling the grinding time manually (manual grinding).

The grinding process starts automatically when the portafilter is inserted and stops

automatically after the defined grinding time has elapsed (grinding according to

recipe) or when the portafilter is removed (manual grinding).

The following recipes (grinding times) are preset at the factory:

Single Shot: 2.5 seconds (approx. 7–8 g*)

Double Shot: 4.5 seconds (approx. 14–16 g*)

To adjust the factory setting and define other grinding times for the recipes, proceed

as described in chapter „Setting or changing the recipe/grinding time“.

The grinder has two modes: Pro Mode and Basis Mode. In Pro Mode, the user can

adjust settings (e.g.change the grinding times for each recipe). In Basis Mode, the

user can only use the grinder in the preconfigured state.

To switch from one mode to the other, tap the corresponding symbol or

on the Typo, Recipe selection display on the touchscreen. The user password must be

entered when switching from Basis Mode to Pro Mode.

Check the grinder and scope of delivery

1. Remove the grinder from the packaging.

2. Check that the delivery is complete.

3. Check for damage to the grinder or the individual parts. If this is the case, do not

use the grinder. Contact your dealer (see chapter „Maintenance and service“).

Setting up and connecting the grinder

1. Place the grinder on a level, stable and vibration-free surface.

2. Make sure the grinder is switched off (On/Off switch (6) in position 0) and

connect the grinder to the mains by inserting the mains plug (4) into a properly

installed earthed socket.

3. Insert the drip tray (9) in the corresponding housing recess.

* The amount of grind depends on the type of espresso bean, the selected grind and the mains fre-

quency (see chapter „Technical data“).

Luna | EN

Inserting the bean hopper

1. Place the bean hopper (1) on the grinder.

When placing the bean hopper, make sure to place the nose of the bean hopper

in the corresponding recess of the bean hopper intake (2).

2. Push the bean hopper down slightly into the bean hopper intake and turn the

bean hopper clockwise to fix it to the grinder.

If the bean hopper cannot be fixed in place by turning it, it may not be positioned

correctly. In this case, align the bean hopper correctly and then try again to fix it

by turning (see also the chapter „Troubleshooting“).

3. Tighten the securing screws for the bean hopper clockwise.

The grinder switches off automatically when the bean hopper is not in use.

Setting up the portafilter support and spout

Adjust the portafilter support (10) to the size of the portafilter of your espresso

machine as described below.

1. Make sure the grinder is switched off (On/Off switch (6) in position 0).

2. Using a screwdriver, unscrew the two screws (8) for adjusting the portafilter

support (left and right) a few turns anticlockwise.

The portafilter support (10) is lowered as far as it will go.

3. Insert the portafilter in the portafilter intake(12).

4. Push the portafilter support upwards until the portafilter fits exactly between the

portafilter support and the portafilter intake.

If the supplied portafilter support does not fit, contact your dealer (see

chapter „Maintenance and service“).

5. Hold the portafilter support in position and retighten the two screws for adjusting

the portafilter support (left and right) clockwise using a screwdriver.

6. Push the spout guide (5) up or down in the locking mechanism to align the

spout(13) in the best position for your portafilter. Align the spout in such a way

that the ground material falls from the spout into the centre of the inserted por-

tafilter.

Readjust the spout after each grinding degree adjustment and every time

you change the type of espresso bean.

Table of contents

Other HEMRO Coffee Grinder manuals

HEMRO

HEMRO DITTING KR 804 User guide

HEMRO

HEMRO MAHLKONIG E80 SUPREME User manual

Popular Coffee Grinder manuals by other brands

SOLAC

SOLAC All4Coffee MC6253 Instructions for use

Teesa

Teesa TSA4011 owner's manual

Somogyi Elektronic

Somogyi Elektronic home HG KD 40 instruction manual

tomado

tomado TM-1287 instruction manual

Aicok

Aicok CG9220 instruction manual

Zelmer

Zelmer ZCG7925 user manual

Baratza

Baratza Vario Operation manual

Baratza

Baratza Forté manual

Isomac

Isomac ROBY Use and maintenance manual

Eldom

Eldom Dott MK60 Operating instruction

Bunn

Bunn SAFETY-FRESH 1 GPR operating instructions

Baratza

Baratza Forté AP user manual

FAMITEC

FAMITEC BOLD user manual

Santos

Santos SC55 User and maintenance manual

Lumme

Lumme LU-2601 user manual

TREVIDEA

TREVIDEA Girmi MC02 user manual

Eureka

Eureka Zenith E User handbook

Baratza

Baratza Maestro Operation manual