HELVAR Imagine 920 User manual
Imagine 920
DALI, S-Dim, DMX Network Router
Installation
Helvar Imagine Router 920: Datasheet
The 920 Imagine Router uses an Ethernet connection
(10/100 Mbps) as a network backbone, to combine Digidim/DALI
and S-DIM networks seamlessly together. Basic functionality is
available ‘out-of-box’ without any programming.
Helvar’s Designer software allows for advanced configuration
and functional programming of the router. The system provides
energy saving features via presence detection and constant
light functionality. Further automation can be achieved through
scheduled events. OPC server software enables interfacing to
Building Management Systems (BMS).
A PC can be connected to the system for diagnostics and logging
purposes, if required, but all data is stored within the system itself
so there is no need for PC control in daily operation. The elimination
of a central controller ensures no single point of failure can cause a
total system shutdown.
Key Features
• Each router supports a total of 128 DALI devices
(64 devices on each subnet)
• 250mApowersupplyforeachDALIsubnet
• Upto100routersmaybenetworkedtogether
• Upto12,800DALIdevices(16,000groups)onaroutersystem
• Industrystandardprotocols(TCP/IPandDALI)
• Built-inreal-timeclock
• Universalsupplyinput
• Upto252S-DIMaddresses
• Upto252DMXaddresses’In’or‘Out’
Installation Notes
• Forinstallationinarestrictedaccesslocationonly
• Isolatethemainssupplybeforeinstallation
• Theexternalmainssupplymustbeprotected.
External protection must not exceed 6 A MCB
• AllDALIandMainscablingmustbe230Vmainsrated
• KeepMainsandDALIwiringseparatefromEthernet,SDIMand
DMXcables
• Installtheunithorizontallytoallowforheatdissipation
• Anyenclosuremustprovideadequatecoolingventilation
• Pleaserefertothe920ImagineRouterInstallationGuide
AC
DALI 1
DMX
DA- DA+ DA- DA+ Source Sink A 0V SC B Term A 0V SC B TermLNESC
Link to
terminate
Link to
terminate
LNESC
Link / Activity
DALI 2 DMX
Power / Status
ImagineImagine
920920
Imagine Router
Dali 1(85 to 264 VAC)Dali 2 Override SDIM DMX
31:07:2012
www.helvar.com
Data subject to change without notice Doc. D004441, issue 02
Technical Data
ETHERNET
(to hub, switch
or PC)
Connections
Mains cable: Solid core up to 4 mm2;
Strandedupto2.5mm2
DALI cable: 0.5mm2-1.5mm2(max.300m@1.5mm2)
Override: Source:3V,50mA/Sink:Max.28V,50mA
S-DIM and DMX cable: LowlossRS485Type(multi-stranded,
twistedandshielded),3or4cores+Screen
0.22 mm2to1.5mm2, max. length 1000 mm
Ethernet: 1xRJ4510/100Mbps,Cat5Eupto100m
(AutoMDI/MDI-Xcrossover)
Power
Mains supply: 85-264VAC,45-65Hz
Power consumption: 23VA
Power circuit protection: 6 A MCB maximum.
The external supply must be protected.
Supply
DALI: 2x250mA(currentlimited)
Mechanical Data
Dimensions (mm): 9U–160(L)x100(H)x58(D)
Weight: 260 g
Mounting: DIN Rail: keep Mains and DALI wiring
separate from Ethernet, Override, S-DIM and
DMXcables
IP rating IP30(IP00atconnectors)
Operating Conditions
Ambient temperature: 0ºC to 40ºC
Relative humidity: 90% max., non-condensing
Storage temperature: -10°C to 70°C
Conformity & Standards
DALI data transfer: DALI standard IEC60929, with Helvar
extensions
EMC Emission: EN55015
Immunity: EN61547
Safety EN60950
Isolation: 4kV
Environment: Complies with WEEE and RoHS directives
DA- DA+ DA- DA+ Source Sink A 0V SC B Term A 0V SC B TermLNESC
Link to
terminate
Link to
terminate
LNESC
Link / Activity
DALI 2 DMX
Power / Status
ImagineImagine
920920
Imagine Router
Dali 1(85 to 264 VAC)Dali 2 Override SDIM DMX
DA- DA+ DA- DA+ Source Sink A 0V SC B Term A 0V SC B TermLNESC
Link to
terminate
Link to
terminate
LNESC
Link / Activity
DALI 2 DMX
Power / Status
ImagineImagine
920920
Imagine Router
L N E SC
(85 to 264)VAC
MAINS SUPPLY
DA- DA+
DALI 1
SOURCE
OVERRIDE S-DIM
A0V SC BTERM
SINK
DA- DA+
DALI2
DMX
A0V SC BTERM
Dali 1(85 to 264 VAC)Dali 2 Override SDIM DMX
Dimensions
Inputs / Outputs
Table of contents
Other HELVAR Network Router manuals
