ASSEMBLY INSTRUCTIONS：
•CAREFULLY UNPACK THE UNIT FROM THE BOX.
•ASSEMBLE THE UNIT ON A FLAT AND CLEAN SURFACE.
•RECENTRE THE BULB IF NECESSARY.IT IS IMPORTANT THAT THE
LIGHT BULB IN YOUR UNIT’S BASE BE COMPLETETLY CENTRED AND
TIGHTENED.THE BULB AND SOCKET MIGHT HAVE BEEN SLIGHTLY
MOVED BURING SHIPPING.IF SO GENTLY PUSH THE SOCKET WITH
YOUR FINGERS TO RECENTER IT. MAKE SURE THAT THE UNIT IS
UNPLUGGED BEFORE TOUCHING IT.
•POSITION THE BODY (B) ON THE BASE (A) AND MAKE SURE IT IS
STEADY.
•PLACE THE CAP(C) ON TOP OF THE BOTTLE TO COMPLETE.
•PLUG IN AND TURN THE SWITCH ON.
•USE ONLY 20 WATT TYPE R39 FROSTED BULB FOR REPLACEMENT.
VARIANCE IN BULB SIZE OR WATTAGE WILL RESULT
UNSATISFACTORY OPERATION, FIRE OR BREAKAGE OF THE GLASS
VESSEL.
CARE AND OPERATION:
•THE UNIT IS DESIGNED TO OPERATE IN AN AVERAGE ROOM TEMPERATURE 20-25 C
(68-77 F).MAKE SURE THE UNIT IS AT ROOM TEMPERATURE BEFORE STARTING.
•INITIAL WARM-UP OF THE UNIT WILL TAKE 3 TO 5 HOURS.SUBSEQUENT WARM-UPS WILL TAKE
LESS TIME DEPENDING ON THE ROOM TEMPERATURE.THE UNIT WILL FUNCTION BEST IF IT IS
OPERATED NO LONGER THAN 10 HOURS AT A TIME.THE UNIT’S FUNCTION WILL BE ACHIEVED
FULLY AFTER THE UNIT HAS BEEN USED 5 OR 6 TIMES.
•THE UNIT OPERATES BEST AT ROOM TEMPERATURES BETWEEN 20-25 C (68-77 F). DO NOT
PLACE IT NEAR SOURCES OF HEAT OR COLD SUCH AS HEAT AND AIR CONDITIONING VENTS.
•DO NOT ADD ANY FLUIDS OR SOLIDS TO YOUR UNIT.THE AIR SPACE AT THE TOP OF THE
VESSEL HAS BEEN PROVIDED TO ALLOW FOR EXPANSION.
•DO NOT OPERATE THE UNIT ON ANY WARM OR HOT SURFACES.OPERATE THE UNIT ONLY ON ROOM
TEMPERATURE SURFACES.
•OPERATION OR STORAGE OF THE UNIT IN DIRECT SUNLIGHT WILL CAUSE COLORS TO FADE.
•ALMAYS OPERATE THE UNIT ON A FIRM STATIONARY SURFACE. THE UNIT OPERATES AT A VERY
WARM TEMPERATURE AND THE VESSEL IS MADE OF GLASS. KEEP THE UNIT OUT OF REACH OF
SMALL CHILDREN AND PETS.
•THE COLOR HUE OF THE＂WAX＂WILL MELLOW AFTER ABOUT 10-20 HOURS OF CONTINOUS
OPERATION.
•DURING THE INITIAL WARM-UP OF THE UNIT, THE HEAT COIL IN THE BASE MAY TEND TO
STAND ON END OR FLOAT TO THE TOP OF THE VESSEL.IF THIS HAPPENS.KEEP YOUR UNIT
OPERATION FOR 4 OR MORE HOURS TO ALLOW THE＂WAX＂MATERIAL TO BECOME COMPLETELY
MELTED.THE COIL SHOULD THEN AUTOMATICALLY DROP DOWN TO IT’S CORRECT POSITION IN
THE BASE OF THE VESSEL.IF THE COIL DOES NOT DROP DOWN, TWIRL THE VESSEL GENTLY IN
THE BASE AND THE COIL WILL DROP.
•USE ONLY FINE GLASS CLEANER AND A SOFT CLOTH TO CLEAN THE SURFACE, ALWAYS UNPLUG
IT BEFORE CLEANING.
USE ONLY R39, 20W, APPLIANCE BULB FOR REPLACEMENT BULB.VARIANCE IN BULB SIZE OR
WATTAGE WILL RESULT UNSATISFACTORY OPERATION, FIRE OR BREAKAGE OF THE GLASS VASE.
THE VESSEL AND BASE WILL BE WARM TO THE TOUCH IN OPERATION AND WHILE AFTER THE
UNIT HAS BEEN TURNED OFF/UNPLUGGED.
KEEP OUT OF REACH OF CHILDREN AND PETS.
ALWAYS OPERATE THE UNIT ON A FIRM STATIONARY SURFACE THAT IS AT ROOM
TEMPERATURE.
DO NOT OPERATE THE UNIT ON ANY WARM OR HOT SURFACES. OPERATE ONLY AT ROOM
TEMPERATURE.
WHEN THE UNIT IS IN OPERATION, BE SURE NOT TO MOVE OR SHAKE IT IN ORDER TO AVOID
LIQUID BECOMING MURKY AND PERMANENTLY DAMAGE.
THE UNIT SHOULD NEVER BE HEATED UP BY ANY OTHER MEANS NOR SHOULD IT BE COOLED
DOWN ARTIFICIALLY. NOT BE USED WHEN THE VASE IS CRACKED OR DAMAGED.
THE SPACE ON THE TOP OF THE VASE IS PROVIDED FOR EXPANSION.DO NOT BREAK THE SEAL
OF THE CAP TO FILL IT WITH LIQUID OR SOLID. BREAKING THE SEAL WILL VOID YOUR
WARRANTY AND RUIN THE PRODUCT.
IF THE EXTERNAL FLEXIBLE CABLE OR CORD OF THE UNIT IS DAMAGED, IT SHALL BE
EXCLUSIVELY REPLACED BY THE MANUFACTURER OR SERVICE AGENT OR A SIMILAR QUALIFIED
PERSON IN ORDER TO AVOID A HAZARD.
