Heatmiser Touch User manual
1Model: PRT-RPTS Model: Touch
Touch Series
1
Model: Touch
2
1
2
3-4
5-6
7-8
9
10
11-12
13
13
14
3-4
10
1
13
7-8
14
Product Image
Table of Contents
What is a Programmable Room
Thermostat?
Installation Procedure
LCD Display
Setting the Clock
Temperature Display
Comfort Levels Explained
Clean Screen
Locking the Keypad
Temperature Control
What is a Programmable Room
Thermostat?
LCD Display
Clean Screen
Temperature Display
Product Image
Temperature Control
15
16
17
18
19-20
21
22
23
24
25
26-28
29-30
15
19-20
24
17
22
26-28
Temperature Hold
Holiday Programming
Frost Protection
Heating ON/OFF
Optional Features Explained
Adjusting the Optional Settings
Optional Settings - Features Table
Re-calibrating the Thermostat
Factory Reset
Error Code E2
Wiring Diagrams
Notes
Temperature Hold
Optional Features Explained
Factory Reset
Frost Protection
Optional Settings - Features Table
Wiring Diagrams
Table Of Contents
2
Model: Touch
3 Touch Series
What is a Programmable Room Thermostat?
A programmable room thermostat is both a programmer and a room thermostat.
The programmer allows you to set“On” and “Off” periods to suit your own lifestyle.
The room thermostat works by sensing the air temperature, switching on the heating
when the air temperature falls below the thermostat setting, and switching it off once this
set temperature has been reached.
So a programmable room thermostat lets you choose what times you want the heating
to be on, and what temperature it should reach while it is on. It will allow you to select
different temperatures in your home at different times of the day (and days of the week)
to meet your particular needs and preferences.
Setting a room thermostat to a higher temperature will not make the room heat up
any faster. How quickly the room heats up depends on the design & size of the heating
system.
Similarly reducing the temperature setting does not affect how quickly the room cools
down. Setting a programmable room thermostat to a lower temperature will result in the
room being controlled at a lower temperature, and saves energy.
The way to set and use your programmable room thermostat is to find the lowest
temperature settings that you are comfortable with at the different times you have
chosen, and then leave it alone to do its job.
4
The best way to do this is to set the room thermostat to a low temperature
– say 18°C , and then turn it up by 1°C each day until you are comfortable with the
temperature. You won’t have to adjust the thermostat further. Any adjustment above
this setting will waste energy and cost you more money.
If your heating system is a boiler with radiators, there will usually be only one
programmable room thermostat to control the whole house. But you can have
different temperatures in individual rooms by installing thermostatic radiator valves
(TRVs) on individual radiators.
If you don’t have TRVs, you should choose a temperature that is reasonable for the
whole house. If you do have TRVs, you can choose a slightly higher setting to make
sure that even the coldest room is comfortable, then prevent any overheating in other
rooms by adjusting the TRVs.
You are able to temporarily adjust the heating program by overriding or using the
temperature hold feature. These features are explained further on pages 14 and 15 of
this manual.
Programmable room thermostats need a free flow of air to sense the temperature,
so they must not be covered by curtains or blocked by furniture. Nearby electric
fires, televisions, wall or table lamps may also prevent the thermostat from working
properly.
Model: Touch
5 Touch Series
Installation Procedure
This Touch Series thermostat is designed to be flush mounted and requires a back
box of 35mm (minimum depth) to be sunk into the wall prior to installation.
Step 1
Carefully separate the front half of the thermostat from the back plate by placing a
small flat head terminal driver into the slots on the bottom face of the thermostat.
Step 2
Place the thermostat front somewhere safe.
Terminate the thermostat as shown in the diagrams on pages 26-28 of this booklet.
Step 3
Screw the thermostat back plate securely into the back box.
Step 4
Clip the front of the thermostat back onto the thermostat back plate.
Do
Mount the thermostat at eye level.
Read the instructions fully so you get the best from our product.
Don’t
Do not install near to a direct heat source as this will affect functionality. Do
not push hard on the LCD screen as this may cause irreparable damage.
6
1 2
3 4
Model: Touch
1 432 5
9
8
17
16
13
6
10
11
12
15
18
7
14
7 Touch Series
1. Day Indicator - Displays the day of the week.
2. Holiday Indicator - Displayed when the thermostat is in Holiday mode.
3. Temperature Hold - Displayed when the thermostat is in Hold mode.
4. Clock - Displays time in normal operation, time left in hold or days left in
holiday mode.
5. Up/Down Keys - Increase or decrease values shown on top digit group.
6. Flame Icon - Displayed when the thermostat is calling for heat, the flame icon
will flash when optimum start function is in operation.
7. Keypad Lock Icon - Displayed when the keypad is locked.
8. OFF Button - Single press to enable/disable frost protection or press and hold
to turn off display.
9. Frost Icon - Displayed when the thermostat is in frost protection mode.
10. Room Temp - Indicates current temperature sensor mode.
11. Set - Indicates when changes are being made to programs or temperature set
points.
12. Clean Screen - Freezes screen temporarily to enable cleaning.
13. Up/Down Keys - Increase or decrease values shown on bottom digit group.
14. Cancel Button - Used to exit setup/program operations.
15. Setup/Programming Keys - Used to navigate setup options.
16. Current Temp - Indicates the current sensor temperature.
17. Units of Temperature - Degrees Celsius or Fahrenheit.
18. Comfort Level Selection Keys - Used in comfort level setup (see page 11).
LCD Display
8Model: Touch
To set the clock, follow these steps.
• Press PROG ...............................................................................................................
• Press CLOCK .............................................................................................................
• Use the Down key to set the hours .................................................................
• Use the Up key to set the minutes ..................................................................
• Use the Day key to set the day of the week .................................................
• Press DONE to confirm and exit ........................................................................
Setting the Clock
Hours
Change Hours
Minutes
Day
Change Minutes
9 Touch Series
Table of contents
Other Heatmiser Thermostat manuals
Heatmiser
Heatmiser Senior User manual
Heatmiser
Heatmiser PRT-EAU1 User manual
Heatmiser
Heatmiser PRT-ETS User manual
Heatmiser
Heatmiser DT User manual
Heatmiser
Heatmiser Touch-HWN User manual
Heatmiser
Heatmiser SLIMLINE User manual
Heatmiser
Heatmiser PRT-W User manual
Heatmiser
Heatmiser DT-W User manual
Heatmiser
Heatmiser Touch-RF User manual
Heatmiser
Heatmiser touch-n User manual
Heatmiser
Heatmiser Touch Series User manual
Heatmiser
Heatmiser NetMonitor V3 Operation manual
Heatmiser
Heatmiser neo Stat WIFI User manual
Heatmiser
Heatmiser PRT User manual
Heatmiser
Heatmiser PRT-W User manual
Heatmiser
Heatmiser PRT-B User manual
Heatmiser
Heatmiser PRT-EWTS User manual
Heatmiser
Heatmiser Slimline Series User manual
Heatmiser
Heatmiser PRTHW-TS User manual
Heatmiser
Heatmiser PRT-ETS User manual
