Heatmaxx SRCH06D User manual
:RRGHQ)LUH3LW&KLPLQHD
1
Be fore retu rning to your retaile r, call our customer
service depa rtment at1-, a.m. - p.m., 3ST, Monday - Frida\RUHPDLOWR
FXVWRPHUVHUYLFH#VKLQHULFKXV
Questions, problems, missing parts?
02'(/
:
65&+'
PACKAGE CONTENTS
2
PART
1A
1B
1C
1D
E
F
1
2
G
H
I
J
K
L
1
1
4
1
1
1
A
B
C
DE
G
H
I
J
L
K
F
Charcoal grid
DESCRIPTION QUANTITY PART DESCRIPTION QUANTITY
Chimney cap Lower stove bowl
Chimney mesh cover Ash tray assembly
Chimney body Leg
Sliding door assembly Poker
Screen assembly Log rack assembly
Upper stove assembly
3
Nut
Qty. 16 Qty. 20 Qty. 16
AA CC
BB
EE
DD
GG
FF
M6 x 12 mm Bolt
Qty. 4
M6 x 15 mm
Flat Bolt
M6 x 15 mm BoltM6 x 20 mm
Flat Bolt
Qty. 4 Qty. 8
Qty. 4
WARNING:
WARNING:
Estimated assembly time: 20 minutes
Suggest two people assemble this product.
Tools required for assembly (not included): Phillips screwdriver, 3/8 in. wrench.
The chiminea is intended for outdoor use only. Keep it at least 12 inches from walls and 36
inches from an overhang. Do not use on wooden decks.
The chiminea is intended to burn wood logs oonly. Do not burn coal, leaves or other
combustibles.
For adult use only. Keep children and pets away from chiminea.w
The chiminea is hot, use with caution. Never touch a hot chiminea with bare hands. Nevert
leave burning chiminea unattended, and always extinguish fire completely when finished
with the chiminea.
Do not use near flammable or combustible objects or materials.
The grid is not intended for cooking and should not be used for this purpose.
The handle of the tools may become hot during and after use.
This product can expose you to chemicals including soot, which is known to the State of
California to cause cancer, and carbon monoxide, which is known to the State of
California to cause birth defects or other reproductive harm. For more information go to
www.P65Warnings.ca.gov.
Before assembling product, make sure all parts are present. Compare parts with package contents
list and hardware contents above. If any part is missing or damaged, do not attempt to assemble
the product. Contact customer service for replacement parts.
HARDWARE CONTENTS (shown actual size)
Washer Spring Washer
SAFETY INFORMATION
PREPARATION
4
2. Place log rack assembly (L) in the center of
unit and attach to legs (J) with M6 x 12 mm
bolts (BB) and washers (CC).
1
2
1.
H
GG
G
J
DD
CC
BB
CC
J
L
AA Nut x 8
CC Washer x 8
DD rehsaW gnirpS x 8
GG M6 x 15 mm Bolt x 8
BB M6 x 12 mm Bolt x 4
CC Washer x 4
AA
Line up the upper stove assembly (G) and
lower stove bowl (H). Position the legs (J)
beneath bowl (H) and attach using
M6 x 15 mm bolts (GG), nuts (AA),
washers (CC) and spring washers (DD).
ASSEMBLY INSTRUCTIONS
Hardware Used
Hardware Used
5
3. 3
E
G
H
CC
AA
DD
EE
Washer x 4
Spring Washer x 4
M6 x 15 mm Flat Bolt x 4
CC
DD
EE
AA Nut x 4
4. Hang the sliding door assembly (D) onto support
bar of screen assembly (E). 4
D
E
Support bar
Align the door of screen assembly (E) and gap of
lower stove bowl (H). Attach the smaller end of
screen assembly (E) onto upper stove assembly
(G) with washers (CC), spring washers (DD),
nuts (AA), and M6 x 15 mm flat bolts (EE).
ASSEMBLY INSTRUCTIONS
Hardware Used
6
6.
5
6
Hardware Used
C
E
CC DD AA
FF
CC
DD Spring Washer x 4
AA Nut x 4
A
B
C
5.Attach chimney body (C) on the top of screen
assembly (E) with washers (CC), spring
washers (DD), M6 x 20 mm flat bolts (FF) and
nuts (AA).
Washer x 4
M6 x 20 mm Flat Bolt x 4
Place the charcoal grid (F) in upper stove assembly
(G) and attach it onto the support bracket.
Then place chimney mesh cover (B) and chimney
cap (A) on top of chimney body (C).
FF
Support
bracket
ASSEMBLY INSTRUCTIONS
7
7
7.
G
I
KL
ASSEMBLY INSTRUCTIONS
Insert the ash tray assembly (I) into the track on upper
stove assembly (G).
Place the poker (K) on the log rack assembly (L).
8
LIGHTING INSTRUCTIONS
1. Open the sliding door using the poker, and put the log(s) (less than 4 lb.) on the charcoal grid.
(NOTE: Make sure log does not extend to the charcoal grid edge, and the log height does
not extend 14 in. The fire height should not extend 3/4 the height of screen.)
2. Light dry wood chips under logs. Close the sliding door with poker.
Inspecting
Inspect this chiminea on a regular basis to ensure product safety and longer product life.
DO NOT attempt to inspect this outdoor chiminea until the fire is COMPLETELY out and cooled
down.
1. Check handles to make sure they are secure.
2. Check components for any signs of damage or rust.
3. If you detect damage to any component, do not operate until you make repairs.
Cleaning
Make sure the fire is completely out when you are no longer using the chiminea.
Make sure the fire is completely out before you clean the ash tray. Sweep the ash into the ash tray,
pull ash tray out and empty it.
Use a damp cotton cloth to remove the smoke stain from the mesh cover and chimney cap.
Clean this outdoor chiminea on a regular basis to promote safer experiences and longer product
life.
Note: After repeated use, the finish may become discolored.
DO NOT attempt to clean this outdoor chiminea until the fire is COMPLETELY out and cooled
down.
DO NOT use oven cleaner or abrasive cleaners as they will damage this product.
DO NOT clean any part of this outdoor chiminea in a self-cleaning oven as it may damage the
finish.
1. Wipe exterior surface with a mild dishwashing detergent or baking soda.
2. For stubborn surface stains use a citrus-based degreaser and a nylon scrubbing brush.
3. Rinse clean with water.
4. Remove built-up creosote from components with a chiminea cleaning product.
Storage
DO NOT move or store this outdoor chiminea until the fire is COMPLETELY out and cooled down.
1. Once the fire is out, (coals are cold and outdoor chiminea is cool to touch), remove ashes and
properly dispose.
2. Store assembled in a location away from children and pets.
Note: If you do not use a cover, store this outdoor chiminea in a dry location to maximize product
life.
CARE AND MAINTENANCE
9
This warranty is valid for the original consumer/purchaser only and excludes industrial,
commercial or business use of the product, product damage due to shipment or failure which
results from alteration, product abuse, or product misuse, whether performed by a contractor,
service company, or consumer. We will not be responsible for labor charges and/or damage
incurred in installation, repair or replacement, nor for incidental or consequential damage.
This warranty gives you specific rights, and you may also have other rights that vary from state
to state.
The item has been manufactured under the highest standards of quality and workmanship.
We warrant to the original consumer/purchaser that all aspects of this product will be free of
defects in material and workmanship for one (1) year from the date of purchase. A replacement
for any defective part will be supplied free of charge for installation by the consumer. Defects or
damage caused by the use of other than genuine parts are not covered by this warranty.
This warranty shall be effective from date of purchase as shown in the purchaser’s receipt. For
ZDUUDQW\VHUYLFHFDOODPSP3670RQGD\)ULGD\RUHPDLOWR
FXVWRPHUVHUYLFH#VKLQHULFKXV
ONE-YEAR LIMITED WARRANTY
10
D
E
F
AA CC
BB
EE
DD
GG
FF
in China
For replacement parts, call our customer service department at 1-8, a.m. - SP
3ST, Monday - Friday or e-mail toFXVWRPHUVHUYLFH#VKLQHULFKXV.
REPLACEMENT PARTS LIST
PART DESCRIPTION
D
E
F
AA Nut
BB M6 x 12 mm bolt
CC Washer
DD Spring washer
EE M6 x 15 mm flat bot
FF M6 x 20 mm flat bolt
GG M6 x 15 mm bolt
Sliding door assembly
Screen assembly
Charcoal grid
Table of contents
Other Heatmaxx Outdoor Fireplace manuals
