Heatmaster ENVIRO User manual
HEATMASTER PTY LTD
H E A T M A S T E R “ E N V I R O ”
High Efficiency gas log space
heater
I n b u i l t M o d e l
C u s t o m e r O p e r a t i n g i n f o r m a t i o n
&
I n s t a l l a t i o n i n s t r u c t i o n s
ENVIRO gas
heaters
: Are Manufactured By
Heatmaster Pty Ltd
2 / 9 Nicole Close
Bayswater, Vic 3153
P: (03) 9761 7130 F: (03) 9761 7134
CONTENTS
PRODUCT FEATURES…………………………………………………3
SAFETY PRECAUTIONS………………………………………………4
CUSTOMER OPERATING INSTRUCTIONS..………………………5
SAFETY FEATURES……………………………………………………7
GAS VALVE ADJUSTMENT…………………………………………..8
INSTALLATION INSTRUCTIONS…………………………………..10
DIMENSIONS…………………………………………………………...16
WIRING DIAGRAM………….………………………………………..17
TROUBLE SHOOTING GUIDE……………………………………...18
SERVICING…………………….………………………………………..19
SPARE PARTS…………………………………………………………..20
CARE OF APPLIANCE & WARRANTY……………………………..21
SERVICE CONTACT INFORMATION………………………………21
PLEASE STORE THIS MANUAL IN A SAFE PLACE
FOR FUTURE REFERENCE
2
Product Features
HEATMASTER “ ENVIRO “ INBUILT GAS LOG HEATER
NAME PLATE
MODEL-ENVIRO
GAS TYPE
NATURAL
LPG
Manufacturer
MODEL TYPE
GAS INPUT
HIGH
LOW
HEAT OUTPUT
HIGH
LOW
Efficiency
Injector Size
Manifold Pressure
High
Low
SAI GLOBAL
Approval No
No to Code AG103
Inbuilt
44.0 MJ/h
23 MJ/h
10.55 kW
4.3 kW
84 %
3.7 mm
0.69 kPa
0.22 KPa
GSCS20118
Inbuilt
44.0 MJ/h
23 MJ/h
10.55 kW
4.3 kW
84 %
2.0 mm
2.25 kPa
0.63 KPa
GSCS20118
Heatmaster
(Pty.Ltd.
41-45 Bendix Drv.
Clayton,
VIC. 3168
To be installed by
an authorized
person in
accordance with
installation
instructions
provided with the
appliance.
Electrical Conform to AS3100 240V 50 Hz 160 Watts Max
Air Pressure Switch Cleveland
Cut in Pressure 100 Pa
Cut out Pressure 91 Pa
Electrical Connection Standard Flex. 2 Mt. 3 Pin Plug
POWER FLUED
ZERO CLEARENCES TO COMBUSTIBLES WALLS
ENERGY RATE 4.6 Stars
AUTOMATIC ELECTRONIC IGNITION
MANUAL OR REMOTE OPERATED CONTROLS
MODULATED HEAT SETTINGS
MODULATED FAN SPEED
EXTERNAL COMBUSTION AIR PREVENT DE-OXIGENATION OF ROOM AIR
DELAYED START FAN PREVENT COLD AIR BEING CIRCULATED AT START UP
HEAT DUCTED TO ANY NEIGHBOURING ROOM IN YOUR HOME
3
SAFETY PRECAUTIONS
4
!
DO NOT OPERATE THIS APPLIANCE BEFORE READING
THE INSTRUCTION BOOKLET
DO NOT PLACE ARTICLES ON OR AGAINST THIS
APPLIANCE
DO NOT STORE CHEMICALS OR FLAMMABLE
MATERIALS OR SPRAY AEROSOLS NEAR THIS
APPLIANCE
DO NOT OPERATE WITH PANELS COVERS OR GUARDS
REMOVED FROM THIS APPLIANCE
DO NOT ENCLOSED THIS APPLIANCE
THE GUARD IN THE GLASS DOOR IS FITTED TO THIS APPLIANCE TO
REDUCE THE RISKOF FIRE OR INJURY FROM BURNS AND NO PART OF IT
SHOULD BE PERMANENTLY REMOVED.
FOR PROTECTION OF YOUNG CHILDREN OR THE INFIRM , A SECONDARY
GUARD IS REQUIRED.
THIS APPLIANCE SHALL ONLY BE INSTALLED BY AN AUTHORIZED PERSON
IN ACCORDANCE TO AS 5601/AG 601 (GAS INSTALLATION CODE)
MANUFACTURER’S INSTALLATION INSTRUCTIONS
LOCAL GAS FITTING REGULATIONS AND MUNICIPAL BUILDING CODES
Customer Operating Instructions
The Heatmaster Enviro Gas log space Heater has been designed for simple and
efficient operation to provide you with an efficient, high heat output. With dual
operation system (manual or remote controlled) at a touch of a button your heater
will provide you with a fully controlled modulated supply of heat, from a pleasant
and steady warmth to the strongest heat output to
reach almost any corner of your home by using the heat optional transfer kit.
PRE OPERATIONS CHECKS
Prior to operating the heater, ensure that the flue terminal is not obstructed
Furthermore, make sure there are no combustible objects leaning against, resting on,
Or within the immediate vicinity of the unit . Check that the heater main power and
gas supply are connected and switched on .
OPERATING THE HEATER
The Heatmaster Enviro can be operated by two different modes, manually or by the
remote controlled thermostat wall unit .
For the manual mode: the controls are located in the left of the front bottom grill
panel. And the operation of the buttons are described in the picture as follow:
MANUAL OPERATED`SWITCHES IN BOTTOM FRONT PANEL
1.-To ignite your heater press the Ignition ON/OFF Button and the heater will
automatically start the ignition sequence. After approximately 30 seconds of
purging the air from inside the unit the heater will ignite.
2.-The heater always starts in the low heat setting and the heater will warm-up for
at least 2 minutes before automatically going to the maximum flame setting.
3.-The fan will not start until the heater has reached the minimum operating
temperature. In the Maximum heat setting the fan speed will be locked in high
and cannot be set to medium or low speed unless you change the heat
setting to medium or low. To select fan speed or the heat setting press the flame
or fan marked buttons in the +or -at side of the switches to increase or
decrease as desired.
DO NOT MODIFY THIS APPLIANCE
5
For the remote programmable thermostat mode:
To use this feature refer to attached Thermostat manual included with this heater.
But here are some basic instructions so you can override some functions to operate
your heater.
1.-To ignite your heater simply press the ON/OFF power button and the heater
automatically will start the ignition sequence within approximated 30 second of
self checking the heater will ignite.
2.-The heater will always start in the low heat setting and the heater will warm-up
for at least 2 minutes before automatically going to the higher flame setting.
3.-The fan will not start until the heater has reached the minimum operating
temperature. To select fan speed or the heat setting press the up or Down
buttons in the remote controller, to decrease or increase differential temperature
between room and thermostat and flame and fan speed will increase or decrease
as desired. (The bigger the temperature differential the bigger the flame and fan
speed
Note: In the Maximum heat setting the fan speed will be locked in high and can
not allow to be set to medium or low speed , at least your change the heat
setting to medium or low.
TURNING THE APPLIANCE OFF
For either manual or remote mode press the on/ off switch once. The room fan will
continue to operate for a short period while the heater cools down.
Please note:
1.- This appliance can not be operated without the fan running
2.- Due to the performance and efficiency of the heater, steam may be noticed coming
from the flue terminal on cool days
3.- As this appliance has a luminous effect some slight carbon deposition may
Occur in the logs.
4.- During first time firing of this appliance, an odour may be noticed for a short
period as the paint cures. It is advisable to leave the windows open during the first
few hours of the very first operation only.
SAFETY PRECAUTIONS
IMPORTANT POINTS
! DO NOT place articles or clothing on or against this appliance
! DO NOT use or store flammable materials near this heater
! DO NOT place any item containing liquid on the heater
! DO NOT spray aerosol in the vicinity of this appliance when it is in operation
! ALWAYS supervise young children near the appliance
It is recommended that a secondary guard be used,to prevent access to appliance by
children, as outer panels of this appliance may reach high temperatures.
NOTE: In the event the electricity supply cord is damaged it must be replaced with
the original Heatmaster part obtainable from your authorized dealer.
6
SAFETY FEATURES:
Automatic Pre-purge: Before heater ignition this operation is done to evacuate any
remains of gas or flue products from inside the firebox that could be the cause of a
mishap
Automatic Shut-off: Should the flame extinguish for any reason there is an
automatic shut off of the gas supply.
Over temperature protection: In the event of the room fan failing , blockage of
airways ,or incorrect gas installation ,the gas supply will automatically shut off to
prevent the appliance from over-heating .
Warning : This appliance must be installed to comply to AS 5601/AG601 codes
and regulations and only by an authorized person who is responsible
for its correct operation at the time of installation and final
commissioning .
7
Pressure adjustment .
Your Enviro Heater has been factory preset and does not need to be readjusted during
installation. But there will be some situations where some service has to be done and
gas pressure may need to be readjusted as per followingInstructions:.
8
Please for your own convenience record the following information in the space
Provided:
Purchased from:
Name…………………………………………………………………………
Address………………………………………………………………………
Phone No…………………………………..Date of purchase … ….. ………
Serial No of appliance…………………………………………………………..
To be completed by the installer:
Name……………………………………………..License No……………………..
Address……………………………………………………………………………..
Phone No……………………………………. Installation Date…………………
9
INSTALLATION:
ONLY TO BE CARRIED OUT BY AN AUTHORIZED PERSON!
The Heatmaster Enviro inbuilt Heater is a zero clearance appliance
which can be optionally installed in a false fireplace or wall cavity made
of combustible materials such as wood or chipboard. Heatmaster provide
the heater with a flue kit of flexible pipes of 65mm and 50mm diameter
for the inlet and exhaust. For the gas supply a flexible stainless steel pipe
with a ½ “ BSP male connector is supplied with the heater and can be
arranged by the installer to be located at the side or rear of the heater.
This easy access connection system allows the heater to be quickly
serviced and replaced by one person when ever maintenance will be
required in the future.
LOGS INSTALLATION:
!ONLY TO BE CARRIED OUT BY AN AUTHORIZED PERSON
Front view of empty tray no logs
10
Other manuals for ENVIRO
3
Table of contents
Other Heatmaster Gas Heater manuals
Popular Gas Heater manuals by other brands
Superior
Superior BGE18NV Installation and operation instructions
Dru
Dru Room-sealed atmospheric gas-fired heating... user manual
klover
klover TKR 35 user guide
Rothenberger Industrial
Rothenberger Industrial 035984 instruction manual
New Buck Corporation
New Buck Corporation 34 user manual
Hargrove
Hargrove Timberland Glow Operation and installation guide
Superior
Superior BGE18NR Operation instructions
Brant Radiant Heaters
Brant Radiant Heaters QTD Series User instruction
L.B. White
L.B. White Therma Grow HW220 Owner's manual and instructions
Sealey
Sealey LP35.V5 instructions
Italkero
Italkero Falo Evo User manual and assembly instructions
Desa
Desa 30LP owner's manual