Healy Wellness User manual

Healy Wellness

Instructions for Use

Frequencies for Life

66 | EN Healy GmbH |Schloss Kränzlin |Darritzer Str. 6 |16818 Kränzlin – Germany

Table of contents

1. General 68

2. Healy 68

2.1 Intended Use 68

2.2 Warnings 68

2.3 Description 68

2.3.1 Hardware Description 68

2.3.2 Software Description 68

2.4 General 69

2.5 Safety Notes 69

3. Preparations for using the Healy 70

3.1 Installation 70

3.1.1 Smartphone requirements 70

3.1.2 Android operating system 71

3.1.3 iOS Operating System 71

3.1.4 Hardware 71

3.1.5 Pairing via Bluetooth 71

3.1.6 Connection of the electrodes 72

4. Operating the Healy 73

4.1 Starting the application using the smartphone 73

4.2 Handling of the Healy hardware 75

4.3 Starting the application without the

smartphone 75

4.4 Stopping the application 75

5. Cleaning, disinfection and maintenance 76

5.1 General 76

5.2 Cleaning 76

EN |

Healy Instructions for Use

Disclaimer: While scientic research underlies Healy technology,

its connection to health and wellness has not been extensively

explored or demonstrated. The Healy is not intended to cure, treat,

mitigate, diagnose or prevent disease, but rather to support ener-

getic balance and enhance recovery, vitality and wellbeing.

EN | 67

T. +49 30 54905949-1 | www.healy.eu | info@healy.de

5.3 Storage between applications 76

5.4 Maintenance 76

5.5 Troubleshooting 76

6. System Components 77

7. Technical Data 77

7.1 General 77

7.2 Electrical parameters 78

7.2.1 Power source requirements 78

7.2.2 Healy 78

7.3 EC-Declaration of Conformity Under the

Directive 78

7.4 Mechanical parameters 79

7.5 Environmental conditions 79

7.5.1 Operation and storage 79

8. Disposal 79

9. Used Symbols and Icons 79

10. Revision status 82

11. Attachment instruction for use “Electrodes” REF:

108-4061 bracelet electrode (black, carbon) 82

11.1 Description 82

11.2 Instructions for use 82

11.3 Warnings 82

11.4 Product life 82

12. Attachment instruction for use “Electrodes” REF:

108-4004 ear electrodes (pair) 83

12.1 Description 83

12.2 Care and storage of the electrodes 83

12.3 Service life of the product 83

12.4 Specications 83

12.5 Important note on using the ear electrodes 83

68 | EN Healy GmbH |Schloss Kränzlin |Darritzer Str. 6 |16818 Kränzlin – Germany

1. General

Thank you for choosing Healy. Please read this manual carefully

and pay special attention to the warnings and cautions.

This manual is intended for the user. Intended users include

adults at home. It aims to ensure safe handling and enables

users to become familiar with the device.

2. Healy

2.1 Intended Use

Healy is a microcurrent device that uses specic frequencies to

promote energetic balancing. It can be applied to dierent parts

of the body.

2.2 Warnings

•Not for use by pregnant women

•Not for use by those with epilepsy

•Do not place the electrodes directly on the eyes, covering the

mouth, on the front of the neck (especially the carotid sinus), or

on the chest and the upper back or crossing through the heart.

2.3 Description

The Healy is a portable device, internally powered and

controlled via Bluetooth by a software application that is ins-

talled on a Smartphone. It has one output. The output can be va-

ried between -10V and +10 V, 0 to 1 MHz, 0 – 4 mA.

The charging of the internal battery is done through the Micro-

USB-Port and the supplied power supply cable.

The software application “Healy APP“ is necessary for congura-

tion and control of the Healy. The “Healy App“ is available in the

Play Store or the App Store. Before installation verify the smart-

phone requirements in section 4.1.1.

2.3.1 Hardware Description

Figure 2 .3.1.1: Healy top view:

Pos. 1 Icon and LED for Blue-

tooth Connection; Pos. 2 On-

O Button; Pos. 3 Battery

icon, Pos. 4 LED for genera-

tor action (if stimulator out-

put is active, then the LED is

blinking) and battery indica-

tor; Pos. 5 Generator icon;

Pos. 6 Icons for the positive

and negative electrode plugs;

Pos. 7 USB-Connector icon;

Pos. 8 Socket for power supply

through micro-USB–connector (not visible in this gure); Pos. 9

Sockets for the electrodes (not visible in this gure)

2.3.2 Software Description

The “Healy APP“ is required for conguring and controlling the

hardware. It allows sending application programs to the device.

EN | 69

T. +49 30 54905949-1 | www.healy.eu | info@healy.de

With the App you can start and

stop the application. The “Hea-

ly APP“ connects to your Healy

hardware using Bluetooth. The

“Healy APP“ can connect only to

one device at a time.

Figure 2.3.2.1: Overview in-

terface of the Healy APP. Pos.

1-Icon for the signal quality of

the Bluetooth connection to the

Healy; Pos. 2-Icon for the batte-

ry status of the Healy

2.4 General

•Intentional misuse can be har-

mful or reduce the eective-

ness of the device.

•Carefully read the instructions

for use before use.

•This product is intended only

for the purpose described in

these instructions for use.

•In this manual, the word DANGER warns of possible personal

injury!

•In this manual, the word WARNING warns of possible damage

caused to property!

2.5 Safety Notes

Danger/Warning:

•Keep this device out of the reach of children.

•Do not immerse the device in liquids.

•Do not use while driving motor vehicles or operating heavy

machinery. The ability to drive or to operate heavy machinery

may be impaired immediately after application.

•Only charge with the supplied cable from an USB-Socket with

5V dc and max 2500 mA.

•In the case of a defect please contact the manufacturer. Any

attempt to repair the device will void the warranty.

•Use with care as the cables may cause a tripping or strangu-

lation hazard.

• Don’t use in presence of ammable gases or in an oxygen en-

riched environment.

•Stop application and remove the electrodes if any irritation,

sensation, allergic reaction or burning occurs at the electrode

contact points and contact us. Pay attention when using the

device and currents higher than 2mA (ear-clip electrodes) or 4

mA (surface electrodes).

•Take care that the units output connectors are always pointed

towards the oor. This way the device is protected against da-

mage by water or liquids.

•The device should only be stored and transported under the

conditions dened in these instructions.

Figure 2.3.2.1

70 | EN Healy GmbH |Schloss Kränzlin |Darritzer Str. 6 |16818 Kränzlin – Germany

•The device is designed for indoor use only.

•Do not use the device in shielded locations, such as intensive

care units in hospitals, airplanes or wherever the use of mobile

phones is prohibited.

•The device must be operated only with supplied accessories

and together with compatible smartphones.

•Not for use by those with a pacemaker or heart disease

•Avoid damages to the electrode cables and the charging cables

caused by sharp objects. If the cables are damaged do not use

them and contact the manufacturer for a replacement. Don’t

use cables that are damaged.

•To protect the device and its accessories against contamina-

tion and damage keep it closed and away from children, dust,

sunlight, moisture, pets and vermin.

•Only use cables and electrodes supplied with the equipment.

Other accessories, cables or electrodes could result in higher

elec tromagnetic eld emissions or less electromagnetic immu-

nity and may lead to loss of function.

•Use of this equipment adjacent to or stacked with other equip-

ment should be avoided because it could result in improper

operation.

•Do not use the adhesive electrode if the gel is dry or visible da-

mage is present or the connecting cable is damaged.

•The equipment and the connecting leads used with this device

must all be in good condition.

•Do not use if recurrent episodes of skin irritation occur.

• Do not apply electrodes on skin aected by abrasions, rash or

wounds.

•Do not carry out maintenance while the equipment is in use.

• Operation in close proximity (i.e., less 3 feet) to a shortwave or

microwave therapy ME equipment may produce instability in

the stimulator output.

3. Preparations for using the Healy

3.1 Installation

Before putting the Healy into operation you need to prepare the

hardware and install the “Healy APP“.

3.1.1 Smartphone requirements

Bluetooth Bluetooth 4.0 or higher

Operating system iOS1version 9.0 or higher

Android2version 4.4 or higher

1iOS is a registered trademark of the operating system for

smartphones and devices manufactured by Apple Inc.

Android is a registered trademark of Google Inc. for the opera-

ting system for smartphones and other devices

EN | 71

T. +49 30 54905949-1 | www.healy.eu | info@healy.de

3.1.2 Android operating system

•Open the Play Store3

•Search for the “Healy APP“

•Choose “Healy APP“

•Download and install on your smartphone

3.1.3 iOS Operating System

•Open the Apple Store4

•Search for the “Healy APP“

•Choose “Healy APP“

•Download and install on your smartphone

3Play Store is the trademark of Google Inc.

4App-Store is the trademark of Apple Inc.

3.1.4 Hardware

•Unpack the Healy and check for damage

•Charge the batteries for 1.5 hours before rst use

• Switch on the Healy device by briey pressing the on-switch

and verify that the right LED is blinking

Note: The battery cannot be removed by the user.

3.1.5 Pairing via Bluetooth

After installation of the App, switch on the Healy by briey

pushing the on-switch (see gure 2.4.1.1) of the device..

After starting the App there is a short starting screen (see gure

3.1. 5.1).

After the App is loaded it is scanning for Bluetooth devices (see

gure 3.1.5.2).

Figure 3.1.5.2: Scanning screen

Figure 3.1. 5.1: Starting screen

72 | EN Healy GmbH |Schloss Kränzlin |Darritzer Str. 6 |16818 Kränzlin – Germany

Within 20 seconds the App scans the environment and connects

to the Healy automatically. If your smartphone detects a Healy

gure 3.1.5.3 appears.

After you scan the QR-Code on the back of the Healy or enter the

serial number of the device you can connect to the Healy by pres-

sing the “Connect” button (see gure 3.1.5.4).

3.1.6 Connection of the electrodes

The electrodes have been tested and evaluated together with

the Healy and are safe and eective for use, if the recommenda-

tions and advice in this manual are followed. Check the package

containing the electrodes and make sure the gel is intact; if the

package is visibly dented or damaged, do not use the product.

Put the plugs of the electrode cables into the sockets of the Hea-

ly. Place the electrodes onto the desired area.

Important note on using the adhesive electrodes:

•Never place electrodes in the region of the carotid artery

•Do not place the electrodes on open wounds

•Before use clean the application area and if necessary shave

the area

•Choose an area free from hair, skin lesions or scars, folds in the

skin, or bony protuberances and which is not in the vicinity of

metallic implants.

•Clean and dry the application area before placing the elec-

trode on it

•Avoid the use of solvents as these could cause skin irritation

and reduce the adherence of electrodes.

•If using alcohol to clean the area, make sure that it has comple-

tely dried before applying the electrodes.

Figure 3.1.5.3: Scan serial

number screen

Figure 3.1.5.4: Connect screen

EN | 73

T. +49 30 54905949-1 | www.healy.eu | info@healy.de

•Connect the electrode to the cable of the device.

•Check the functioning of the system before beginning the

procedure.

•If the procedure is interrupted, check the functioning of the

system again before recommencing the session.

•Remove the liner and apply the electrode to the skin surface.

•Before switching on the device, check the adherence of the

electrode to the skin surface.

WARNINGS:

•A reduced contact between the skin and the electrode may

cause the electric current to concentrate in one point and

cause burning.

•Interrupt the application if there is discomfort or a burning

sensation.

• After the session, turn o the device, disconnect the cable

from the electrode and gently remove the electrode from the

skin by lifting it up by one corner.

•Rapid removal of the electrode could cause skin traumas.

•Do not remove by pulling the connection part of the cable.

•After use, reposition the electrodes in the plastic liner and put

them back in the pouch.

•Electrodes may be reused: Reuse only for the same person.

• Verify the adhesion of the electrode before use. When electro-

des lose adhesion, gently rub one or two drops of water onto

the gel surface. This may extend the usability. If there is no im-

provement, replace with new electrode.

•Keep the packet closed in order to prevent the unused electro-

des from becoming dehydrated.

•Do not reposition the elec-

trode during use.

4. Operating the Healy

You should become familiar

with these frequently used

operations:

• switch On-O (please refer

to chapter 3.1.5 and 4.4)

•select application (please re-

fer to chapter 4.1)

•start application (please re-

fer to chapter 4.1)

•connect the electrodes

(please refer to chapter 3.1.6)

4.1 Starting the appli-

cation using the smart-

phone

After the installation of the

App, pairing and connection

of the electrodes, the Healy

is ready for operation. In the

Figure 4 .1.1: Overview interface

74 | EN Healy GmbH |Schloss Kränzlin |Darritzer Str. 6 |16818 Kränzlin – Germany

After selecting a program category the program page with the

icons of the dierent programs is loaded (see gure 4.1.2).

Figure 4.1.3: Information page

for the placing the electrodes

Figure 4.1.4: Application page Figure 4.1.5: Application page

with white time indicator –

electrical circuit is closed

overview screen you can select which program category you

want to use (see gure 4.1.1).

Figure 4.1.2: Program page

Other manuals for Wellness

Table of contents

Other Healy Medical Equipment manuals

Healy

Healy TimeWaver User manual

Popular Medical Equipment manuals by other brands

TekTone

TekTone Tek-CARE160 Installation and operation manual

NeuroMetrix

NeuroMetrix Quell 2.0 user manual

AMT

AMT XLR8 Quick reference guide

Medipost-Nutristoma

Medipost-Nutristoma MD300K2 instruction manual

EDAN

EDAN SONOTRAX Pro user manual

Restorative Therapies

Restorative Therapies RT300 Service guide

Gendex

Gendex Expert DC installation manual

Dexcowin

Dexcowin ADX4000W user manual

Libelium

Libelium MySignals user manual

Acelity

Acelity V.A.C.ULTA 4 user manual

Caputron

Caputron ActivaDose II tDCS quick start guide

FujiFilm

FujiFilm Sonart Features

Plinth 2000

Plinth 2000 93CDT Service manual

GE SENOGRAPHE 800T Operator's manual

GE Definium 5000 Operator's manual

Kanmed

Kanmed GE-1380 user manual

Huntleigh

Huntleigh FD1 Instructions for use

Stryker

Stryker SPR Plus Operation manual