HDX HD32448RCPS User manual

Item # 1000 026 321

Model #HD32448RCPS

THANK YOU

We appreciate the trust and confidence you have placed in HDX through the purchase of this storage unit.

We strive to continually create quality products designed to enhance your home. Visit us online to see our full line of products

available for your home improvement needs. Thank you for choosing HDX!

USE AND CARE GUIDE

6-SHELF STORAGE RACK

Questions, problems, missing parts? Before returning to the store,

call Customer Service

8 a.m. - 6 p.m., EST, Monday-Thursday

8 a.m. - 5 p.m., EST, Friday

888-449-5520

HOMEDEPOT.COM/HDX

Table of Contents

Table of Contents..........................................................2

Safety Information.........................................................2

Warranty.........................................................................2

Pre-Assembly ................................................................2

Planning Assembly.....................................................2

Specifications............................................................. 2

Package Contents...................................................... 3

Assembly …………………………………………………. 4

Safety Information

WARNING: Do not exceed the maximum weight

limit of 850 lbs. per shelf, evenly distributed.

CAUTION: Evenly distribute the weight across each

shelf, and keep the heavier loads on the bottom.

CAUTION: Do not allow children to climb or play in

or around the shelves.

CAUTION: Place the unit on a level surface to avoid

a tipping hazard.

Warranty

If this product is defective, contact the customer service team at 888-449-5520 or visit www.HOMEDEPOT.COM/HDX.

Pre-Assembly

PLANNING ASSEMBLY

Carefully read all instructions and caution warnings before beginning assembly. Determine shelving heights prior to

assembly to avoid dismantling for adjustment. More than one person may be required during assembly. Use care when

handling. Assemble the unit on a soft surface, such as carpet, to avoid scratching the floor or the unit.

CAUTION: Place the unit on a level surface to avoid

a tipping hazard.

NOTE: Please dispose of the loose, round plastic

pieces. These are used to separate the shelves for

shipping purposes.

SPECIFICATIONS

Weight 103.7 lbs.

Width 47.75 in.

Depth 24 in.

Height 72 in.

3 HOMEDEPOT.COM/HDX

Please contact 888-449-5520 for further assistance.

Pre-Assembly (continued)

PACKAGE CONTENTS

Part Description Quantity

A Plastic Sleeve 50 (2 spare

parts)

B Bottom Post Assembly 4

C Top Post Assembly 4

D Shelf 6

Assembly

1 Assembling the posts 2Attaching the bottom shelf

□Screw the top post assembly (C) into the bottom

post assembly (B) until secure.

□Repeat this procedure for the remaining posts (B &

C).

NOTE: More than one person may be required for

this step.

□Locate the desired position where the lowest shelf

will be installed onto the post assemblies.

□Insert a plastic sleeve (A) into the appropriate

groove on each bottom post assembly (B). Ensure

the tapered end of the plastic sleeve (A) is facing up

towards the top post (C).

□Place the shelf (D) on its side, and slide the post

assemblies up through the bottom of the shelf (D),

beginning with the top post (C), until the shelf (D) is

firmly seated on the plastic sleeves (A).

□After the shelf (D) is in place, turn the unit to the

upright position.

□Push down on each corner of the shelf (D), ensuring

it is in the fully locked position.

3 Attaching additional shelves

□Locate the desired position of the next lowest shelf

(D), and insert the plastic sleeves (A) into the

appropriate grooves on the post assemblies.

□Slide the shelf (D) down from the top of the post

assemblies and onto the plastic sleeves (A). Push

down on each shelf (D) corner, ensuring that it is

firmly seated on the plastic sleeves (A).

□Repeat this procedure for the remaining shelves

(D).

4Leveling the unit

NOTE: The bottom post assemblies (B) have foot

levelers pre-installed into the bottoms.

□Screw the pre-installed foot levelers clockwise or

Counter clockwise until the unit is level.

NOTE: The tapered sleeves must be at the same height for

each pole to ensure the shelf sits on the sleeves levelly.

NOTE: The post has a groove with a double line marking. It

can help to identify the height of the tapered sleeve in each

post.

Double

line

markin

UPSIDE

(

level side

)

Narrow side up

HARDWARE CONTENTS

Washer

Qty. 2

Plastic Anchor

Qty. 2

Screw

Qty. 2

To prevent the unit from tipping over, secure it to a

wall in the following manner: Drill a hole in the wall

using a 1/4 in. drill bit (not included). Insert the

plastic anchor (BB) into the hole. Insert the screw

(CC) through the washer (AA) then through the back

of the top shelf wire and into the plastic anchor (BB)

as shown. Be sure unit is secure and doesn’t

wobble or tip over.

AA BB

WARNING

Unit must be placed on a level surface or

leveled with included hardware (when

applicable).

Do not sit or stand on or allow children to

climb, sit or stand on the assembled

product.

For safety reasons, it is imperative that this

unit be mounted on the wall or floor.

Unit can tip over causing severe injury or

death.

Do not exceed the recommended weight

limits.

Evenly distribute the weight on each level

and always keep the heavier loads on the

bottom.

Before cutting, drilling or hammering into

any wall or floor surface, verify the location

of electrical, plumbing and gas lines.

Cutting may cause serious injury.

8 a.m. a 5 p.m., hora del este, Viernes

¿Tiene preguntas, problemas, o faltan piezas?

Antes de regresar a la tienda,

llame a Servicio al Cliente de HDX

de lunes a viernes de 8 a.m. a 6 p.m., hora local del Este

888-449-5520

WWW.HOMEDEPOT.COM

Conserve este manual para uso futuro.

ADITAMENTOS

Arandela

Cant. 2

Ancla de expansión de plástico

Cant. 2

Tornillo

Cant. 2

Para evitar que la unidad se vuelque, fíjela a la

pared de la siguiente manera: Taladre un orificio en

la pared con una broca para taladro de ¼”

(no se incluye). Inserte el ancla de expansión de

plástico (BB) en el orificio. Inserte el tornillo (CC) a

través de la arandela (AA) y luego por la parte

posterior de los alambres de la repisa superior y en

el ancla de expansión de plástico (BB), como se

muestra. Asegúrese de que la unidad esté fija y que

no tambalee ni se vuelque.

AA BB

El producto debe colocarse en una

superficie nivelada, o nivelarse con el

herraje incluido (si aplica).

No siente, pare o permita que los niños

suban, se sienten o se paren en el producto

ensamblado.

Por razones de seguridad, es indispensable

que el producto quede fijo en la pared.

El producto se puede volcar causando

lesiones graves o la muerte.

No rebasar el límite de peso recomendado.

Distribuir la carga uniformemente en cada

nivel y mantener siempre lo más pesado en

la parte inferior.

Antes de cortar, perforar o martillar en la

pared o piso, verificar la ubicación de la

instalación eléctrica, tuberías y líneas de

gas; cortarlas puede causar graves

lesiones.

ADVERTENCIA

This manual suits for next models

Table of contents

Other HDX Rack & Stand manuals

HDX

HDX HD14HRCPS User manual

HDX

HDX EH-WSTHDUS-004 User manual

HDX

HDX SL-WSUS-136 User manual

HDX

HDX EH-WSTHDUS-018 User manual

HDX

HDX EH-WSTHDUS-021 User manual

HDX

HDX HD18481302BPS User manual

HDX

HDX 207149519 User manual

HDX

HDX HD24CRCPS User manual

HDX

HDX E4090180OBK5THD User manual

HDX

HDX HD18481302PS User manual

HDX

HDX HD18481303PSYOW User manual

Popular Rack & Stand manuals by other brands

Salamander

Salamander Acadia AC/W/L400/WH Assembly instructions

Fohhn

Fohhn VAT-09 Mounting instruction

ricoo

ricoo FS0522 quick start guide

AMSOIL

AMSOIL BMK-22 Installation and service instructions

Kargo Master

Kargo Master 48220 installation guide

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 installation instructions

ricoo

ricoo S1222 installation instructions

Ready-Set-Mount

Ready-Set-Mount RSMCM602 instruction manual

VidaBox

VidaBox VB MNT FFS2 installation guide

Welch Allyn

Welch Allyn 48960 Assembly instructions

Arkon

Arkon CM035-ST-2 installation instructions

PROEL

PROEL PLWIN60C user manual

Agilent Technologies

Agilent Technologies E2609B installation guide

Mustang

Mustang MV-ARM4 installation guide

Mounting Solutions

Mounting Solutions WRM-320 manual

Pyle

Pyle PMKSPAD1 manual

ShelterIt

ShelterIt 21208 installation instructions

SPL

SPL RackPack?4 1040 manual 