HDFury Integral 2 User manual

4K Integral 2 - 18Gbps

User Manual 4K Integral Rev 2.32

Disclaimer: 3rd party and/or custom firmware providing extra features are not covered in this manual.

4K Integral 2 –User Manual

Disclaimer: 3rd party and/or custom firmware providing extra features are not covered in this manual.

4K Integral 2 –User Manual

Table of Contents

Overview …...................................................................................................... 4

Connecting Cables …........................................................................................ 5

Power Status/LOGO…...................................................................................... 6

Reset HPD/Factory Default…...........................................................................7

EDID Mode Selection ......................................................................................8

INFO Control ………………................................................................................... 9

Input Switching and Matrix Mode...................................................................10

HDCP Settings………………………..…………………………………………………………………….11

Scaler Settings…............................................................................................... 12

Combo RST + INP..............................................................................................13

Combo INF + INP.............................................................................................. 14

List of Custom EDID available..........................................................................15

Backside Sticker............................................................................................... 18

Selecting the Windows PC driver for USB GUI and Firmware Update......……19

Update the Integral 2 Firmware with a Windows PC...............................…… 20

Integral 2 USB GUI for Windows PC...........................................................……24

Integral 2 RS232 Control............................................................................…… 48

Integral 2 Total Control APP with GoBlue.......................................................53

IR Codes List..................................................................................................... 55

Frequently Asked Questions (FAQ) ................................................................102

Highlight Features ...........................................................................................106

Specifications...................................................................................................109

Certifications....................................................................................................111

Pro Tips.............................................................................................................112

Disclaimer: 3rd party and/or custom firmware providing extra features are not covered in this manual.

4K Integral 2 –User Manual

Overview

The HDfury team would like to thank you personally for purchasing the 4K Integral 2!

This unique HDMI2.0b and HDCP2.2 device supports true full 4K60 4:4:4 600MHz 18Gbps bandwidth

signals. It will allow you to solve any HDCP error, Split or Matrix any SD/HD/FHD/UHD/HDR/DV or PC

signals up to 600MHz, scale up or scale down between FHD and UHD on any channel individually, display

relevant information on OSD, select between multiple edid banks, Inject Infoframe and more. Control

can be completed with IR codes, through slide switch or push buttons on the unit, via a wired USB

connection to a Windows PC, via RS232 (MAC/WIN/Linux) or through wireless Bluetooth connection

with any Smartphone or Tablet running Android or iOS. (GoBlue mandatory for iOS/Android APP

support)

Disclaimer: 3rd party and/or custom firmware providing extra features are not covered in this manual.

4K Integral 2 –User Manual

Connecting Cables

To use your 4K Integral 2:

• Connect a HDMI input cable to the HDMI input.

• Connect a HDMI output cable to the HDMI output.

• Connect the Integral 2 power supply.

• Connect any additional HDMI input/output cable, RS232 or any audio output cable (optional).

HDMI/HDCP 1.x devices at output must be connected to TOP (Downscale) Output port. Make sure that

you are using 600MHz certified HDMI 4K cable if you plan to set up a 4K60 4:4:4 8b or 4K60 4:2:2 12b

600MHz 18Gbps link in your setup.

Disclaimer: 3rd party and/or custom firmware providing extra features are not covered in this manual.

4K Integral 2 –User Manual

Power/Status LED

The Integral 2 Logo LED will shortly turn ON then OFF when power supply is applied, Integral 2 Logo will

glow Green to indicate that the HDCP handshake has been completed.

The status of the Logo may be used for troubleshooting:

[LOGO OFF]: Insufficient power or no active input. Use the Integral 2 power supply; make sure

the source is ON. Logo might also stay OFF based on INFO button conditions (see p.9)

[LOGO ON]: The Integral 2 is powered and receiving and decoding a HDMI signal.

Disclaimer: 3rd party and/or custom firmware providing extra features are not covered in this manual.

4K Integral 2 –User Manual

Reset HPD (Short Press) or Reset to factory default (Long Press)

The 4K Integral 2 offers 2 functions per push button.

[Short Press] on Reset Button will generate Hot Plug Detection event.

[Long Press] (over 10s for security) will reset the Integral 2 to factory default.

Note: You can also Reset the unit or perform any others control with IR codes, from the USB GUI for

Windows PC, through RS232 for MAC/WIN/Linux or via smartphone/tablet APP for Android and iOS.

Disclaimer: 3rd party and/or custom firmware providing extra features are not covered in this manual.

4K Integral 2 –User Manual

EDID Mode Selection

EDID slide switch has 3 positions.

Switch should be set to middle position to allow control via USB, IR, RS232 or Bluetooth device.

[Automix Mode]: Create EDID based on mutual sink capabilities controlled by a selectable algorithm

with enforceable flags so both sinks will always show a picture and audio.

[Custom Use / BT]: Pick and use EDID from a selection of preloaded EDID tables (see p.14) or load any

EDID bank of your choice. By default the selected EDID table is a 4K60 4:4:4 BT2020 HDR 600MHz with

Full Audio capabilities. Leave the slide in this position to allow remote control via USB/IR/RS232 or

Android/iOS APP and/or to pick and use any of the 100 different EDID tables available. Please note that

Integral 2 can hold a specific individual EDID for each input.

[Fixed EDID with L/R Audio]: This mode is a 4K60 4:2:0 8b SDR 2channel stereo 300MHz basic table. It

can be used as a security EDID to ensure a picture in mostly every setup/situation.

Note: You can also switch EDID mode and any others control with IR codes, from the USB GUI for

Windows PC, RS232 for MAC/WIN/Linux or via smartphone/tablet APP for Android/iOS using GoBlue.

Disclaimer: 3rd party and/or custom firmware providing extra features are not covered in this manual.

4K Integral 2 –User Manual

INFO Control

INFO Control Button allows you to control the OSD info displayed and the light in your setup.

[Short Press] Turn OSD ON/OFF

[Long Press] (over 2sec) will cycle through OSD + Logo LED + Custom Text > Logo LED + OSD > OSD >

Logo LED > None (no lights and no info at all)

Note: You can also control light in your setup and any others control with IR codes, from the USB GUI for

Windows PC, RS232 for MAC/WIN/Linux or via smartphone/tablet APP for Android/iOS using GoBlue.

Disclaimer: 3rd party and/or custom firmware providing extra features are not covered in this manual.

4K Integral 2 –User Manual

Input Switching and Matrix mode

Input Switch / Matrix Mode Button allow you to switch active inputs or enter/exit the Matrix mode.

[Short Press] will switch the active input channels in Splitter Mode and swap/cross signals in Matrix

mode.

[Long Press] (over 2sec) will enter/exit the Matrix Mode

Integral 2 OSD will report the two active inputs in Matrix mode while only the current active input is

reported via OSD in Splitter mode.

Note: You can also switch inputs and Matrix, Splitter mode and any others control with IR codes, from

the USB GUI for Windows PC, RS232 for MAC/WIN/Linux or via smartphone/tablet APP for Android/iOS

using GoBlue.

Table of contents

Other HDFury Media Converter manuals

HDFury

HDFury 4K Integral User manual

HDFury

HDFury Ultra AVR Key User manual

HDFury

HDFury HDfury3 User manual

HDFury

HDFury 4K Vertex User manual

HDFury

HDFury Vertex2 User manual

HDFury

HDFury 4 User manual

HDFury

HDFury 4K Diva 18Gbps User manual

HDFury

HDFury Nano GX User manual

HDFury

HDFury 4K Linker User manual

Popular Media Converter manuals by other brands

SoundTraxx

SoundTraxx Blunami BLU-2200 user guide

SPROLINK

SPROLINK VA1 user manual

Acclaim Lighting

Acclaim Lighting DDC-1-AC user guide

Nikon

Nikon AF-S TC-20E III user manual

Axis

Axis AXIS Q7406 user manual

Omega

Omega TAC80B-J instruction sheet

Zoom

Zoom Thunderbolt TAC-2R Operation manual

OST

OST iConverter 10/100M quick start guide

Vertiv

Vertiv Netsure user manual

birddog

birddog MINI user guide

Roland

Roland GI-10 owner's manual

Wallenstein

Wallenstein WX310 Operator's manual

Pace

Pace MSS 200-1 Service manual

Solar Converters

Solar Converters EQ 12/24-50 manual

CYP

CYP EL-7400V Operation manual

TIE

TIE MIDI 1i1o user manual

DCS

DCS Vivaldi Upsampler user manual

Westermo

Westermo MCW-211 SERIES user guide