Hatteland IP200 User manual
IP200
ETX Base Board
USER’S MANUAL
Version 1.2
ii
IP200 User’s Manual
Acknowledgments
PS/2 are trademarks of International Business Machines
Corporation.
Microsoft Windows is a registered trademark of Microsoft
Corporation.
Winbond is a registered trademark of Winbond Electronics
Corporation.
All other product names or trademarks are properties of their
respective owners.
IP200 User’s Manual iii
Table of Contents
Introduction.......................................................1
Specifications......................................................................1
Checklist..............................................................................2
Board Dimensions...............................................................3
Installations.......................................................5
Setting the Jumpers .............................................................6
Connectors on IP200.........................................................13
iv
IP200 User’s Manual
This page was intentionally left blank.
INTRODUCTION
IP200 User’s Manual 1
Introduction
Specifications
Product Name IP200
Form Factor ETX base board (for ETX CPU modules)
Dimensions 7.5” x 9”
USB External connector x 1 (3 ports)
Pin-header x 1 (1 port)
TV - Out One pin-header for composite and S-video
VGA DB15 connector x 1 (for CRT)
Serial Ports External DB9 connectors x 4 (4 ports): for COM 1~4,
support RS232/422/485, and optical isolation support
(use Optocoupler: 6N137
Pin-header x 2 (2 ports): for COM5/6, support RS232.
Parallel Port External DB25 connector x 1 (supports SPP/EPP/ECP)
Keyboard/Mouse External PS/2 connector x 2 (for KB and MS)
Pin-header x 1 (for KB/MS)
Ethernet External RJ45 connector x 2, Pin header x 2
Compact Flash One compact flash connector with ejector
IDE Interface One 40-pin box-header (2.54mm for secondary IDE
One 44-pin PCB socket (2mm/RT angle) for primary IDE
Expansion Slots One PCI slot (for two PCI cards on riser card)
One PC/104 connector
One Micro PCI socket
IrDA Pin header
LCD Panel
Connector LVDS interface (Hirose DF13) connectors x 1
Audio Connector 1 x pin-header for Line-in, Line-out, Mic
1 x pin-header for CD IN (from Line-in)
Chipsets NetMos NM9845CV (PCI interface) x 1 and IMP16C552 x
1: support 4 COM ports
Intel 82541GI LAN controller x 1: Gigabit LAN controller
PWM LTC1628 x 1 : for power convert, output DC 5V &
3.3V, output current depend on input
Power Supply
Connector 1 x power connector for DC 12V input
Other
Connectors 1 x pin-Header for feature header (including: speaker,
power button, H/D reset button, HDD activity LED, status
LED, I2C bus, buzzer)
2 x fan connectors
1 x pin-header for panel backlight control
1 x 4-pin CD-ROM power outlet header
1 x 4-pin FDD power outlet header
Operation Temp. 0°C~60°C (32°F~140°F)
Storage Temp. -20°C~80°C (-68°F~176°F)
Relative Humidity 10%~90% (non-condensing)
INTRODUCTION
2
IP200 User’s Manual
Checklist
Your IP200 package should include the items listed below. Damaged or
missing items should be reported to your supplier.
•The IP200 ETX Baseboard
•This User’s Manual
•One compact disc containing the following:
•Ethernet Drivers
•Graphics Drivers
•Audio Drivers
INTRODUCTION
IP200 User’s Manual 3
Board Dimensions
INTRODUCTION
4
IP200 User’s Manual
This page is intentionally left blank.
INSTALLATIONS
IP200 User’s Manual 5
Installations
This section provides information on how to use the jumpers and
connectors on the IP200 in order to set up a workable system. The topics
covered are:
Setting the Jumpers .............................................................6
Connectors on IP200.........................................................13
INSTALLATIONS
6
IP200 User’s Manual
Setting the Jumpers
Jumpers are used on the IP200 to select various settings and features
according to your needs and applications. Contact your supplier if you
have doubts about the best configuration for your needs. The following
lists the connectors on IP200 and their respective functions.
Jumper Locations on IP200............................................................7
COM1 / COM2 / COM3 / COM4 RS232/422/485 Settings...........8
JP20: RI Setting for COM1 ............................................................9
JP19: RI Setting for COM2 ............................................................9
JP18: RI Setting for COM3 ............................................................9
JP17: RI Setting for COM4 ..........................................................10
JP9: RI Setting for COM5 ............................................................10
JP16: RI Setting for COM6 ..........................................................10
JP15: LVDS Voltage Setting........................................................10
JP21: CF Setting of Master/Slave.................................................11
JP22: Gigabit LAN Enable/Disable..............................................11
JP26: Audio Source Setting for Audio AMP................................11
J28: CMOS Setting.......................................................................11
J31: AT or ATX Mode Setting.....................................................12
JP27: UART Chip NM9845CV IDSEL Setting...........................12
Table of contents
