Harsper HP-4200V User manual

FCC ID : O5XHP-500V

HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD.

SAN 136-1, AMI-RI, BUBAL-EUP, ICHEON-SI, KYOUNGKI-DO, 467-701, KOREA

TEL:+82 31 639 8517 FAX:+82 31 639 8525 www.hct.co.kr

Report No. : HCT-FO5-0923 1/1

ATTACHMENT E.

- USER’S MANUAL -

OWNER'S MANUAL

■Caution 3

■Precaution 5

■Viewing the Control Panel 10

■Viewing the Connecting Panel 11

■Viewing the Remote Control

- Key Description 13

- PIP (Picture In Picture) 15

- Loading the Batteries 16

■Table Stand Installation 17

■Speaker Installation 18

■Connection the TV Cable 19

■Connection the VCR 20

■Connection the DVD 21

■Connection the Set Top Box 23

■Connection the PC (D-Sub & DVI) 24

■Displayable Monitor Specification 25

■Basic Operation 26

■OSD Menu Structure 27

■Choosing the Channel Type 28

■Storing Channels Automatically 28

■Channel Add/Del and Fine Tune 29

■Editing the Channels 30

■Digest Function 31

■Changing the Picture Mode 32

-Adjusting the User Mode 33

■Changing the Color Temperature 35

■Color Enhancer 35

■Video NR (Noise Reduction) 36

■Changing the Screen Form 36

■Selecting the Black Enhancer 37

■Adjusting the PC Screen (Geometry) 38

Foreword

Overviewing your the Monitor

Installation

Connection the Cable/Devices

Setting the Channel

Setting the Picture

Contents

OWNER'S MANUAL

■Adjusting the Sound Balance 40

■Changing the Sound Mode 40

■Adjusting User Sound Mode 41

■Spatial Effect 41

■AVC (Auto Volume Control) 41

■MTS (Multichannel Television Sound) 42

■Digital Output (HDTV Mode Only) 43

■Aujusting the Transparency of the OSD Window 44

■PIP (Picture In Picture) 44

- Changing the Size in PIP 45

- Choosing the Source in PIP 45

- Picture Swap in PIP 46

- Changing the Position in PIP 46

■V-Chip 47

- Tv Block in V-Chip 48

- Movie Block in V-Chip 48

- Change Password in V-Chip 49

- V-Chip Blocking in V-Chip 49

■Other Advanced Function

- Set ID in Advanced 50

- Setting the Blue Screen Mode 51

- Changing the OSD Language 51

- Front Key Lock in Advance 51

- Burn Protect in Advance 52

■HDTV Setup (HDTV mode Only)

- Time Zone in HDTV Setup (HDTV mode) 53

- Daylight in HDTV Setup (HDTV mode) 54

■HDCCD Setup (HDTV mode only) 55

■Setting the Current Time 56

■Setting the On Time 56

■Setting the Off Time 58

■Setting the Sleep Timer 58

Contents

Setting the Sound

Setting the Others

Setting the Time

Troubleshooting

Spec.

Warranty Card

OWNER'S MANUAL

Always be careful when using your Monitor. To reduce the risk of fire, electrical shock, and other

injuries, keep these safety precautions in mind when installing, using, and maintaining your machine.

- TO PREVENT DAMAGE WHICH MAY RESULT IN FIRE OR SHOCK HAZARD.

- DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

- SHOCK HAZARD DO NOT OPEN.

CAUTION

WARNING

- Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be

placed on the apparatus.

- This is Class B product. In a domestic environment this product may cause radio interference in which case the

user may be required to take adequate measures.

- To reduce the risk of fire and electric shock, do not expose this product to rain or moisture.

FCC NOTICE

This device has been tested and found to comply with the limits for a Class B device, pursuant to Part 15 of the FCC

Rules. These limits are designed to provide reasonable protection against harmful interference in home environment

as well as in a commercial, industrial or business environment. This equipment can generate, use and radiate radio

frequency energy and, if not installed and used in accordance with the instruction, may cause harmful interference to

radio communications. However, there is no guarantee that interference will not occur in a particular installation. If

this equipment does cause harmful interference to radio or television reception, which can be determined by turning

the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following

measures :

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

Changes or modification not expressly approved by the party responsible for compliance could void the user's

authority to operate the equipment.

Connecting of peripherals requires the use of grounded shielded signal cables.

Read all safety and

operating instructions before

operating your Monitor.

Keep the safety and operating

instructions for future

reference.

Heed all warnings on the

Monitor and in the operating

instructions.

CAUTION

These servicing instructions are for use by qualified service

personnel only. To reduce the risk of electric shock, do not

perform any servicing other than that contained in the operating

instructions unless you are qualified to do so.

CAUTION

The stand intended for use only with This TV. Use with other

apparatus is capable of resulting in Instability causing possible

injury .

Caution

OWNER'S MANUAL

Always be careful when using your TV. To reduce the risk of fire, electrical shock, and other injuries,

keep these safety precautions in mind when installing, using, and maintaining your machine.

1) Read these instructions.

2) Keep these instructions.

3) Heed all warnings.

4) Follow all instructions.

5) Do not use this apparatus near water.

6) Clean only with a dry cloth.

7) Do not block any of the ventilation openings. Install in accordance with the manufacturer's instructions.

8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus

(including amplifiers) that produce heat.

9) Do not defeat the safety purpose of the polarized or grounding type plug. A polarized plug has two

blades with one wider than the other. A grounding type plug has two blades and a third grounding prong.

The wide blade or the third prong is provided for your safety. When the provided plug does not fit into your

outlet, consult an electrician for replacement of the obsolete outlet.

10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles,

and the point where they exit from the apparatus.

11) Only use the attachments/accessories specified by the manufacturer.

12) Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the

apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury

from tip-over.

13) Unplug this apparatus during lightning storms or when unused for long periods of time.

14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been

damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have

fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or

has been dropped.

15) When installing the PDP TV, do not block the appliance coupler with any structure.

User can easily have access to the coupler to disconnect it from AC main power.

Precaution

OWNER'S MANUAL

Precaution

Setting

Follow all operating and use

instructions.

Do not use the Monitor where

contact with or immersion in

water is a possibility, such as

near bath tubs, sinks, washing

machines, swimming pools, etc.

Avoid overhead power lines. An outside

antenna system should not be placed in the

vicinity of overhead power lines or other

electric light or power circuits or where it can

fall into such power lines or circuits. When

installing an outside antenna system, be

extremely careful to keep from touching the

power lines or circuits. Contact with such

lines can be fatal.

Bend antenna cable between

inside and outside building to

prevent rain from flowing in.

-This may cause water damaged

inside the Monitor and could give

an electric shock.

Ground outdoor antennas. If an outside antenna or cable system is connected to the Monitor, be sure the

antenna or cable system is grounded so as to provide some protection against voltage surges and built-up

static charges. Section 810 of the National Electrical Code, ANSI/NFPA No.70-1984, provides information

about proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna

discharge unit, size of grounding conductors, location of antenna discharge unit, connection to grounding

electrodes, and requirements for the grounding electrode.

Do not place an outside antenna

in the vicinity of overhead power

lines, other electric light or power

circuits.

- This may cause an electric

shock.

There should be enough distance

between an outside antenna and

power lines to keep the former

from touching the latter even when

the antenna falls.

- This may cause an electric shock.

CAUTION

In case of the following cases, unplug the unit from the wall outlet and

contact qualified service center.

* When power supply code or plug is damaged

* If liquid has been spilled on the unit or if alien objects have fallen into the unit.

* If the monitor has been exposed to rain or water.

* If the monitor does not operate normally by following the operating instructions.

* If the monitor dropped or the cabinet has been damaged

* When the monitor exhibits a distinct change in performance.

OWNER'S MANUAL

This plasma display is designed to be

mounted horizontally (wide viewing).

Any inquiry regarding its vertical position

should be forwarded to the manufacture

directly

Precaution

WARNING

Setting

When installing the Monitor on a table,

be careful not to place the edge of its

stand.

- This may cause the Monitor to fall,

causing serious injury to a child or

adult, and serious damage to the

Monitor.

Provide ventilation for the Monitor. The unit

is designed with slots in the cabinet for

ventilation to protect it from overheating.

Do not block these openings with any

object, and do not place the Monitor on a

bed, sofa, rug or other similar surface. Do

not place it near a radiator or heat register.

If you place the Monitor on a rack or

bookcase, ensure that there is adequate

ventilation and that you've followed the

manufacturer's instructions for mounting.

OWNER'S MANUAL

Precaution

Use only the accessory cord designed for this product to prevent

shock. The power supply voltage rating of this product is AC100-

240V, the power cord attached conforms to the following power

supply voltage. Use only the power cord designated by our dealer

to ensure Safety and EMC. When it is used by other power supply

voltage, power cable must be changed. Consult your product

dealer.

CAUTION

POWER

Unplug the Monitor from the wall outlet

before cleaning. Use a damp cloth; do not

use liquid or aerosol cleaners.

Unplug the Monitor from the wall outlet and

disconnect the antenna or cable system during a

lightning storm or when left unattended and unused

for long periods of time. This will prevent damage to

the unit due to lightning and power-line surges.

Protect the power cord. Power supply cords should be

routed so that they won't be walked on or pinched by

objects placed on or against them. Pay particular

attention to cords at plugs, convenience receptacles,

and the point where they exit from the unit.

Use only a grounded or polarized outlet.

For your safety, this Monitor is equipped

with a polarized alternating current line

plug having one blade wider than the

other. This plug will fit into the power

outlet only one way. If you are unable to

insert the plug fully into the outlet, try

reversing the plug. If the plug still does

not fit, contact your electrician to replace

your outlet.

Do not touch the plug with wet

hand.

- It can make an electric

shock.

Protect the power cord. Power

supply cords should be routed so

that they won't be walked on or

pinched by objects placed on or

against them. Pay particular

attention to cords at plugs,

convenience receptacles, and the

point where they exit from the unit.

OWNER'S MANUAL

Precaution

CAUTION

Operation

Upon completion of any service or

repairs to this Monitor, ask the

service technician to perform safety

checks to determine that the Monitor

is in a safe operating condition.

Do not place anything containing

liquid on top of the Monitor.

-This may cause a fire or could give

an electric shock.

Never add any attachments

and/or equipment without

approval of the manufacturer.

Such additions can increase the

risk of fire, electric shock, or

other personal injury.

In case of smoke or strange smell

from the Monitor, switch it off,

unplug it from the wall outlet and

contact your dealer or service center.

- This may cause a fire or could give

an electric shock.

Do not insert anything through

the openings in the unit, where

they can touch dangerous

voltage points or damage parts.

Never spill liquid of any kind on

the Monitor.

When replacement parts are required, be

sure the service technician uses

replacement parts specified by the

manufacturer or those that have the same

characteristics as the original part.

Unauthorized substitutions may result in

additional damage to the unit.

WARNING

Operation

If you make adjustments yourself, adjust

only those controls that are covered by the

operating instructions.

Adjusting other controls may result in

damage and will often requireextensive

work by a qualified technician to restore the

Monitor tonormal.

Do not let children hang on or

ride on the TV.

OWNER'S MANUAL

Precaution

DO not use new battery with old

one.

– This can lead a fire or electric

shock caused by leakage liquid

from abused batteries .

Only use the specified batteries.

-This make cause damaged the

Monitor or could give an electric

shock.

Put the batteries in right direction (+/-).

- Otherwise, it can make a fire, injury and

pollution caused by bursting of batteries.

WARNING

Operation

More than two people are necessary

to move or take off the package due

to the product’s weightiness.

- Otherwise, it can cause personal

injury.

Keep the batteries out of reach of

children when exchanged.

- Seek urgent medical advice if child

swallows a battery.

Avoid having a fixed image remain

on the screen for a long period of

time. Typically a frozen still picture

from a VCR, 4:3 picture format or if

a CH label is present; the fixed

image may remain visible on the

screen.

When moving the Monitor

assembled with speakers do not

carry holding the speakers.

-This may cause the Monitor to

fall, causing serious injury to a

child or adult, and serious

damage to the Monitor.

The distance between eyes

and the screen should be

about 5~7 times as long as

diagonal length of the screen.

- If not, eyes will strain.

This manual suits for next models

Table of contents

Other Harsper Plasma TV manuals

Harsper

Harsper HP-5500V User manual

Popular Plasma TV manuals by other brands

Hitachi

Hitachi 50PD9800TA user manual

Pioneer

Pioneer PDP-LX508G operating instructions

LG 60PM9700 Specifications

LG 50PX4D owner's manual

Panasonic

Panasonic Viera TH-37PA20 operating instructions

Panasonic

Panasonic TH-103PF12E Specifications

Panasonic

Panasonic VIERA TH-42PZ80Q operating instructions

LG 60PA5500 Specifications

Sony

Sony WEGA KE-P42M1 Service manual

VESTEL

VESTEL PL2000 Service manual

VisionQuest

VisionQuest PVQ-32VGB owner's manual

Maxent

Maxent MX-5020HPM specification

XOCECO

XOCECO PH-42T8 Service manual

Maxent

Maxent MX-42VM7 specification

Sampo

Sampo PME-42S6 Service manual

Hitachi

Hitachi 32PD7800 Service manual

LG 50PK550 Specifications

Haier

Haier P42A1-AK Service manual