Harman JBL SW10 User manual

High Impact Without Wires.

The JBL SW10 powered wireless subwoofer adds impactful, deep bass to the JBL LINK BAR

to create the ultimate immersive audio experience. Featuring a 10" woofer, tuned bass reﬂex

enclosure and onboard 300-watt ampliﬁer, the JBL SW10 delivers rich and thrilling bass

without the hassle of wires. In order to provide ﬂexible placement options, JBL has incorporated

a downward ﬁring design architecture making room location far less critical. The SW10 is the

perfect add-on when you are looking for real JBL pro bass.

Features

10" (250mm) woofer

Wireless audio connection

Bass reﬂex port design

Easy setup

10" Powered Wireless Subwoofer

HARMAN International Industries, Incorporated

8500 Balboa Boulevard, Northridge, CA 91329 USA

www.jbl.com

Industries, Incorporated, registered in the United States and/or other countries. Features, speciﬁcations and appearance are

subject to change without notice.

Features and Beneﬁts

10" (250mm) woofer

The 10" woofer has been engineered to work in tandem with the tuned bass reﬂex enclosure to

deliver thundering bass.

Wireless audio connection

Convenience of ﬂexible placement without the hassle of wires.

Bass reﬂex port design

Using this tuned design allows for greater output and deeper bass.

Easy setup

One button setup for easy connection to the JBL LINK BAR.

What’s in the box:

JBL SW10 wireless subwoofer

Power cable

Quick start guide

Warranty card

Technical Speciﬁcations:

Maximum power: 300W

Standby power consumption: <0.5W

Woofer size: 1 x 10" (250mm)

Frequency response: 35–120Hz

Operating temperature: 0°C – 45°C

5.8GHz wireless transmitter modulation:

GFSK

5.8GHz wireless frequency range:

5740MHz–5840MHz

5.8GHz max transmitting power: 8dBm

Dimensions (W x H x D): 305mm x

440mm x 305mm (12" x 16" x 12")

Weight: 12.3kg (27.2lbs)

Packaging dimensions (W x H x D):

360mm x 503mm x 360mm

(14" x 20" x14")

Packaging weight (gross):

13.5kg (29.8lbs)

10" Powered Wireless Subwoofer

IJBL

CAUTION

RISK

OF

ELECTRIC

SHOCK

. DO

NOT

OPEN

.

A

THE

LIGHTNING

FLASH

WITH

AN

ARROWHEAD

SYMBOL

,

WITHIN

AN

EQUILATERAL

TRIANGLE

,

IS

INTENDED

TO

ALERTTHE

USER

TO

THE

PRESENCE

OF

UNINSULATED

"

DANGEROUS

VOLTAGE

"

WITH

IN

THE

P

ROD

U

CT'S

E

NCLOSURE

T

HAT

MAY

BE

OF

SUFFIC

I

ENT

MAGN

IT

UDE

TO

CONSTITUT

EA

RISK

OF

ELECTRIC

SHOC

K

TO

PERSONS

.

A

THE

EXCLAMATION

POINT

WITHIN

AN

EQUILATERAL

TRIANGLE

IS

INTENDED

TO

ALERTTHE

USER

TO

THE

PRESENCE

OF

IMPORTANT

OPERATING

AND

MAINTENANCE

(SERVICING)

I

NSTRUCTIONS

IN

THE

LI

TERATUR

E

ACCOMPANY

I

NG

THE

PRO

D

UCT.

WARNING:

TO

REDUCE

TH

ERI

SK

OF

FI

RE

OR

ELECTRIC

SH

OCK,

DO

NOT

EXPOSE

TH

IS

APPARATUS

TO

RAIN

OR

MOISTURE.

CAUTION

FCC

AND

IC

STATEMENT

FOR

USERS

(USA

AND

CANADA

ONLY)

This

device

comp

l

ies

wi

th

part

15

of

the

F

CC

Rules.

Operation

is

subject

to

the

following

two

conditions

:

(1)

This

device

may

not

cause

ha

r

mful

interference,

and

(2)

this

device

must

accept

any

interference

received,

including

interference

that

may

cause

undesired

operation.

CAN

ICES-3(8)/NMB-3(8)

Federal

Communication

Commis

s

ion

Interference

Statem

e

nt

This

equi

p

ment

has

been

tested

an

d

fo

und

to

comply

with

the

limits

for

aCl

ass

B

digital

device,

pu

r

suant

to

P

art

15

of

the

FCC

Ru

l

es

.

These

limits

are

designed

to

prov

i

de

reasonable

protection

against

harmfu

l

interference

in

a

residential

installation

.

This

equipment

generates

,

uses

and

can

radiate

radio

frequency

energy

and

,if

not

installed

and

used

in

accordance

with

the

instructions

,

may

cause

harmful

interference

to

r

adio

communicatio

n

s.

However

,

there

is

no

guarantee

that

interference

will

not

occur

in

a

partic

u

lar

installation

.If

this

equipment

does

cause

ha

r

mful

interference

to

r

adio

or

television

reception,

which

can

be

determined

by

turning

the

equipment

off

and

on,

the

user

is

encou

r

aged

to

try

to

correct

the

interference

by

one

or

more

of

the

following

measures:

•

Reorient

or

relocate

the

receiving

antenna

.

•

Increase

the

sepa

r

ation

between

the

equipment

and

receiver.

•

Connect

the

eq

u

ipment

into

an

out

l

et

on

a

circuit

different

from

that

to

which

the

receiver

is

connected.

•

Consult

the

dealer

or

an

experienced

radio/TV

technician

for

help.

Caution

:

Changes

or

modifications

not

expressly

approved

by

HARMAN

could

void

the

user's

au

t

hority

to

operate

the

equipment.

For

Products

ThatTransmit

RF

Energy

:

FCC

AND

IC

INFORMATION

FOR

USERS

This

device

complies

with

Part

15

of

the

FCC

rules

and

Industry

Canada

license

-

exempt

RSS

standard(s

).

Operation

is

subject

to

the

following

two

conditio

ns:

(1)

This

device

may

not

cause

harmful

interference;

and

(2)

th

is

dev

i

ce

must

accept

any

interference

received,

in

cluding

interfe

r

ence

th

at

may

cause

u

ndesired

operation

.

IMPORTANT

SAFETY

INSTRUCTIONS

For

all

products:

1.

Read

these

instructions.

2.

Keep

these

instructions.

3.

Heed

all

warnings.

4.

Follow

all

instructions.

5.

Do

not

use

this

apparatus

near

water.

6.

Clean

only

with

a

dry

cloth.

7.

Do

not

block

any

ventilation

openings.

Install

this

apparatus

in

accordance

with

the

manufacturer's

instructions.

8.

Do

not

install

this

apparatus

near

any

heat

sources

such

as

radiators,

heat

registers,

stoves

or

other

apparatus

{induding

amplifiers)

that

produce

heat

9.

Do

not

defeat

the

safety

purpose

of

the

polarized

or

grounding-type

plug.

A

polarized

plug

has

two

blades

with

one

wider

than

the

other.

A

grounding-type

plug

has

two

blades

and

a

third

grounding

prong.

The

wide

blade

or

the

third

prong

is

provided

for

your

safety.

If

the

provided

plug

does

not

fit

Into

your

outlet,

consult

an

electrician

for

replacement

of

the

obsolete

outlet.

10.

Protect

the

power

cord

from

being

walked

on

or

pinched,

particularly

at

plugs,

convenience

receptacles

and

the

point

where

they

exit

from

the

apparatus.

11.

Use

only

attachments/accessories

specified

by

the

manufacturer

.

12.

Use

only

with

the

cart,

stand,

tripod,

bracket

or

table

specified

by

a--

the

manufacturer

or

sold

with

the

apparatus.

When

a

cart

is

used,

r.,

use

caution

when

moving

the

cart/apparatus

combination

to

~:I

avoid

injury

from

tip-over.

*-=-

-

13.

Unplug

this

apparatus

during

lightning

storms

or

when

unused

for

long

periods

of

time

.

14.

Refer

all

servicing

to

qualified

service

personnel.

Servicing

Is

required

when

the

apparatus

has

been

damaged

in

any

way,

such

as

when

the

power-supply

cord

or

plug

is

damaged,

liquid

has

been

spilled

or

objects

have

fallen

Into

the

apparatus,

or

the

apparatus

has

been

.

exposed

to

rain

or

moisture,

does

not

operate

normally

or

has

been

dropped.

15.

Do

not

expose

this

apparatus

to

dripping

or

splashing,

and

ensure

that

no

objects

filled

with

liquids,

such

as

vases,

are

placed

on

the

apparatus.

16.

To

disconnect

this

apparatus

from

the

AC

mains

completely,

disconnect

the

power-

supply

cord

plug

from

the

AC

receptade.

17.

The

mains

plug

of

the

power-supply

cord

shall

remain

readily

operable.

18.

Do

not

expose

batteries

to

excessive

heat

such

as

sunshine,

fire

or

the

like.

19.

This

apparatus

is

intended

to

be

used

only

with

the

power

supply

and/or

charging

cable

provided

by

the

manufacturer.

FCC/IC

Radiation

Exposure

Statement

This

equipment

complies

with

FCC/IC

RSS-102

radiation

exposure

limits

set

forth

for

an

uncontrolled

environment.

For

Wi-Fi

SG

device

FCC

Caution:

High

power

radars

are

allocated

as

primary

users

of

the

5.25

to

5.35

GHz

and

5.65

to

5.85

GHz

bands.

These

radar

stations

can

cause

interference

with

and/or

damage

this

device.

No

configuration

controls

are

provided

for

this

wireless

equipment

allowing

any

change

in

the

frequency

of

operations

outside

the

FCC

grant

of

authorization

for

US

operation

according

to

Part

15.407

of

the

FCC

rules.

IC

Caution:

User

should

also

be

advised

that:

(i)

The

device

for

operation

in

the

band

5150

-

5250

MHz

is

only

for

indoor

use

to

reduce

the

potential

for

harmful

interference

to

co-channel

mobile

satellite

systems;

(ii)

the

maximum

antenna

gain

permitted

for

devices

in

the

bands

5250

-

5350

MHz

and

5470

-

5725

MHz

shall

comply

with

the

e.i.r.p.

limit:

and

(iii)

The

maximum

antenna

gain

permitted

for

devices

in

the

band

5725

-

5825

MHz

shall

comply

with

the

e.i.r.p.

limits

specified

for

point-to-point

and

non

point-to-point

operation

as

appropriate.

(iv)

Users

should

also

be

advised

that

high-power

radars

are

allocated

as

primary

users

(i.e.

priority

users)

of

the

bands

5250

-

5350

MHz

and

5650

-

5850

MHz

and

that

these

radars

could

cause

interference

and/or

damage

to

LE-LAN

devices.

Exposure

of

humans

to

RF

fields

(RSS-102)

The

computers

employ

low

gain

integral

antennas

that

do

not

emit

RF

field

in

excess

of

Health

Canada

limits

for

the

general

population;

consult

Safety

Code

6,

obtainable

from

Health

Canada's

Web

site

at

http://www.hc-sc.gc.ca/

The

radiated

energy

from

the

antennas

connected

to

the

wireless

adapters

conforms

to

the

IC

limit

of

the

RF

exposure

requirement

regarding

IC

RSS-102,

Issue

5

clause

4.

SAR

tests

are

conducted

using

recommended

operating

positions

accepted

by

the

FCC/

RSS

with

the

device

transmitting

at

its

highest

certified

power

level

in

all

tested

frequency

band

without

distance

attaching

away

from

the

body.

Non-compliance

with

the

above

restrictions

may

result

in

violation

of

FCC

RF

exposure

guidelines.

Use

Restriction

Attention

in

France,

operation

is

limited

to

indoor

use

within

the

band

5150-5350

MHz.

For

Products

with

Radio

Receivers

That

Can

Use

an

External

Antenna

(USA

ONLY):

CATV

(Cable

TV)

or

Antenna

Grounding

If

an

outside

antenna

or

cable

system

is

connected

to

this

product,

be

certain

that

it

is

grounded

so

as

to

provide

some

protection

against

voltage

surges

and

static

charges.

Section

810

of

the

National

Electrical

Code

(NEC),

ANSI/NFPA

No.

70-1984,

provides

information

with

respect

to

proper

grounding

of

the

mast

and

supporting

structure,

grounding

of

the

lead-in

wire

to

an

antenna

discharge

unit,

size

of

grounding

conductors,

location

of

antenna

discharge

unit,

connection

to

grounding

electrodes

and

requirements

of

the

grounding

electrode.

Note

to

CATV

System

Installer:

This

reminder

is

provided

to

call

the

CATV

(cable

TV)

system

installer's

attention

to

article

820-40

of

the

NEC,

which

provides

guidelines

for

proper

grounding

and,

in

particular,

specifies

that

the

cable

ground

shall

be

connected

to

the

grounding

system

of

the

buOding,

as

close

to

the

point

of

cable

entry

as

possible.

For

CD/DVD/Blu-ray

Disc™

Players:

Caution:

This

product

uses

a

laser

system.

To

prevent

direct

exposure

to

the

laser

beam,

do

not

open

the

cabinet

enclosure

or

defeat

any

of

the

safety

mechanisms

provided

for

your

protection

.

DO

NOT

STARE

INTO

THE

LASER

BEAM.

To

ensure

proper

use

of

this

product,

please

read

the

owner's

manual

carefully

and

retain

it

for

future

use.

Should

the

unit

require

maintenance

or

repair,

please

contact

your

local

JBL

service

center.

Refer

servicing

to

qualified

personnel

only.

CLASS

1 LASER PRODUCT

KLASSE 1 LASER PRODUKT

LUOKAN

1 LASER LAITE

KLASS

1

LASER

APPARAT

CLASSE 1 PRODUIT LASER

FOR

ALL

EU

COUNTRIES:

For

products

that

include

audio

out

Prevention

of

hearing

loss

Caution:

Permanent

hearing

loss

may

occur

if

earphones

or

headphones

are

used

at

high

volume

for

prolonged

periods

of

time.

For

France,

the

products

have

been

tested

to

comply

with

the

Sound

Pressure

Level

requirement

laid

down

in

the

applicable

NF

EN

50332

-1

:2013

and

/

or

EN

50332

-

2:2013

standards

as

required

by

French

Article

L.5232-1.

Note:

To

prevent

possible

hearing

damage

,

do

not

listen

at

high

volume

levels

for

long

periods.

WEEE

Notice

The

Directive

on

Waste

Electrical

and

Electronic

Equipment

(WEEE)

,

which

entered

into

force

as

European

law

on

14

/

02

/

2014

,

resulted

in

a

major

change

in

the

treatment

of

electrical

equipment

at

end

-

of

-

life

.

The

purpose

of

this

Di

rective

is

,

as

a

first

priority

,

the

prevention

of

WEEE

,

and

in

addition,

to

promote

the

reuse

,

recycling

and

other

forms

of

recovery

of

such

wastes

so

as

to

reduce

disposal.

The

WEEE

logo

on

the

product

or

on

its

box

indicating

collection

for

electrical

and

electronic

equipment

consist

s

of

the

crossed-out

wheeled

bin

,

as

shown

below

.

-

This

product

must

not

be

disposed

of

or

dumped

with

your

other

household

waste

.

You

are

liable

to

dispose

of

all

your

electronic

or

electrical

waste

equipment

by

relocating

over

to

the

specified

c

ollection

point

for

recycling

of

such

hazardous

waste

.

Isolated

collection

and

proper

recovery

of

your

electronic

and

electrical

waste

equipment

at

the

time

of

disposal

will

allow

us

to

help

conserving

natural

resources.

Moreover

,

proper

recycling

of

the

electronic

and

electrical

waste

equipment

will

ensure

safety

of

human

health

and

environment.

For

more

information

about

electronic

and

electrical

waste

equipment

disposal,

recovery,

and

collection

points,

please

contact

your

local

city

center,

household

waste

disposal

service

,

shop

from

where

you

purchased

the

equipment

,

or

manufacturer

of

the

equipment.

RoHS

Compliance

This

product

is

in

compliance

with

Directive

2011

/

65

/

EU

of

the

European

Parliament

and

of

the

Council

of

8

June

2011

on

the

restriction

of

the

use

of

certain

hazardous

substances

in

electrical

and

electronic

equipment.

For

Products

That Include

Batteries

EU

Batteries

Directive

2013/56/EU

A

new

battery

directive

2013

/

56/EUon

Battery

and

Accumulator

replacing

directive

entered

into

force

on

the

1/

07

/

2015.

The

directive

applies

to

all

types

of

batteries

and

accumulators

(AA

,

AAA

,

button

cells

,

lead

acid

,

rechargeable

packs)

including

those

incorporated

into

appliances

except

for

military,

medical

and

power

tool

applications.

The

directive

sets

out

rules

for

collection

,

treatment

,

recycling

and

disposal

of

batteries,

and

aims

to

prohibit

certain

hazardous

substances

and

to

improve

environmental

performance

of

batteries

and

all

operators

in

the

supply

chain.

Instructions

for

Users

on

Removal,

Recycling

and

Disposal

of

Used

Batteries

To

remove

the

batteries

from

your

equipment

or

remote

control,

reverse

the

procedure

described

in

the

owner's

manual

for

inserting

batteries.

For

products

with

a

built-in

battery

that

lasts

for

the

lifetime

of

the

product

,

removal

may

not

be

possible

for

the

user.

In

this

case

,

recycling

or

recovery

centers

handle

the

dismantling

of

the

product

and

the

removal

of

the

battery

.

If,

for

any

reason

,it

becomes

necessary

to

replace

such

a

battery,

this

procedure

must

be

performed

by

authorized

service

centers

.

In

the

European

Union

and

other

locations,

it

is

illegal

to

dispose

of

any

battery

with

household

trash.

All

batteries

must

be

disposed

of

in

an

environmentally

sound

manner

.

Contact

your

local

waste-management

officials

for

information

regarding

the

environmentally

sound

collection

,

recycling

and

disposal

of

used

batteries

.

WARNING:

Danger

of

explosion

if

battery

is

incorrectly

replaced.

To

reduce

risk

of

fire

or

burns

,

don

't

disassemble

,

crush

,

puncture,

short

external

contacts

,

expose

to

temperature

above

60

°C

(140°F),

or

dispose

of

in

fire

or

water.

Replace

only

with

specified

batteries.

The

symbol

indicating

'separate

collection'

for

all

batteries

and

accumulators

shall

be

the

crossed-out

wheeled

bin

shown

below:

In

case

of

batteries,

accumulators

and

button

cells

containing

more

than

0.0005

%

mercury,

more

than

0.002

%

cadmium

or

more

than

0.004

%

lead

,

shall

be

marked

with

the

chemica

l

symbol

for

the

metal

concerned:

Hg,

Cd

or

Pb

respectively.

Please

Refer

to

the

below

symbol:

Hg

Cd

Pb

WARNING

DO

NOT

INGEST

BATTERY,

CHEMICAL

BURN

HAZARD

[The

remote

contro

l

supplied

with]

This

product

contains

a

coin/button

cell

battery.

If

the

coin/button

cell

battery

is

swallowed,

it

can

cause

severe

internal

burns

in

just

2

hours

and

can

lead

to

death.

Keep

new

and

used

batteries

away

from

children.

If

the

battery

compartment

does

not

close

securely,

stop

using

the

product

and

keep

it

away

from

children.

If

you

think

batteries

might

have

been

swallowed

or

placed

inside

any

part

of

the

body,

seek

immediate

medical

attention.

For

All

Products

Except

Those

with

Wireless

Operation:

HARMAN

International

hereby

declares

that

this

equipment

is

in

compliance

with

the

EMC

2014/30/EU

Directive,

LVD

2014/35/EU

Directive.

The

declaration

of

conformity

may

be

consulted

in

the

support

section

of

our

Web

site,

accessible

from

www.jbl.com.

For

All

Products

with

Wireless

Operation:

HARMAN

International

hereby

declares

that

this

equipment

is

in

compliance

with

the

essential

requirements

and

other

relevant

provisions

of

Directive

2014/53/EU.

The

declaration

of

conformity

may

be

consulted

in

the

support

section

of

our

Web

site,

accessible

from

www.jbl.com.

HARMAN

HARMAN International Industries, Incorporated

8500 Balboa Boulevard, Northridge,

CA

91329

USA

516.255.4545

(USA

only)

HARMAN

International

Industries,

Incorporated.

All

rights

reserved.

JBL

is

a

trademark

of

HARMAN

International

Industries,

Incorporated,

registered

in

the

United

States

and/or

other

countries.

Features,

specifications

and

appearance

are

subject

to

change

without

notice.

CE

www.jbl.com

l,l

,Q--HMSW1<HlAFB1

Harman JBL SW10 User manual

Popular Subwoofer manuals by other brands