Harman AMX PR01-0808 User manual
Version: V1.0.2
PR01-0808
Precis 8x8 HDMI 4K60 with 4 HDBaseT
User Manual
Important Safety Instructions
1. Do not expose this apparatus to
rain, moisture, dripping or
splashing and that no objects filled
with liquids, such as vases, shall be
placed on the apparatus.
6. Clean this apparatus
only with dry cloth.
2. Do not install or place this unit in
a bookcase, built-in cabinet or in
another confined space. Ensure the
unit is well ventilated.
3. To prevent risk of electric
shock or fire hazard due to
overheating, do not obstruct the
unit’s ventilation openings with
newspapers, tablecloths,
curtains, and similar items.
4. Do not install near any heat
sources such as radiators, heat
registers, stoves, or other apparatus
(including amplifiers) that produce
heat.
5. Do not place sources of naked
flames, such as lighted candles, on
the unit.
7. Unplug this apparatus
during lightning storms or
when unused for long
periods of time.
8. Protect the power cord
from being walked on or
pinched particularly at
plugs.
9. Only use attachments /
accessories specified by
the manufacturer.
10. Refer all servicing to
qualified service
personnel.
Warnings of FCC
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
1
Table of Contents
Introduction ...................................................................................................... 3
Overview................................................................................................... 3
Features ................................................................................................... 3
Package Contents .................................................................................... 4
Specifications............................................................................................ 5
Panel Description ..................................................................................... 9
Front Panel........................................................................................ 9
Rear Panel ...................................................................................... 10
Installation and Wiring.................................................................................... 11
Installation .............................................................................................. 11
Wiring ..................................................................................................... 11
Front Panel Control........................................................................................ 14
Remote Control.............................................................................................. 16
System Code Switch............................................................................... 17
RS232 Operation ........................................................................................... 18
RS232 Pinout ......................................................................................... 18
RS232 Pass Through ............................................................................. 18
NetLinx Control .............................................................................................. 20
Device Number and Ports....................................................................... 20
Telnet Control ......................................................................................... 22
Web UI Control ....................................................................................... 24
Web UI Control .............................................................................................. 26
Access the Web UI ................................................................................. 26
Web UI Introduction................................................................................ 27
Matrix Control .................................................................................. 27
Advanced Setting ............................................................................ 28
2
Firmware Upgrade ......................................................................................... 42
Before You Start...................................................................................... 42
Transferring KIT Files ............................................................................. 43
Trouble Shooting............................................................................................ 45
Steps of Regular Troubleshooting Routine ...................................... 45
Warranty Terms and Conditions..................................................................... 46
3
Introduction
Overview
PR01-0808 is an 8x8 HDMI Matrix with HDMI 2.0 and HDCP 2.2 compatibility,
allows eight sources to be switched to any of the four HDBaseT outputs to
remote displays and any of the eight HDMI outputs to local displays
simultaneously.
PR01-0808 features 8 analog L/R outputs, and audio matrix allows audio
de-embedded from any HDMI input being routed to any analog audio output.
PR01-0808 can be controlled by press buttons in front panel, IR, RS232, Web
GUI and NetLinx. DIP switch is also provided for manual EDID adjustment.
As a compact 1U stand-alone 8x8 HDMI matrix, it offers the convenience of
future-ready Ultra HD A/V switching and distribution solution.
Features
HDMI Inputs and Outputs support up to 4K@60Hz 4:4:4 8bit
HDBT Outputs support up to 4K@60Hz 4:2:0 8bit
HDBT transmits 4k@60 4:2:0 8bit signal up to 70m/230ft, 1080P signal
up to 100m/328ft via Cat 5e/6 cable
HDBT transmits 4k@60 4:2:0 8bit signal up to 100m/328ft, 1080P signal
up to 100m/328ft via Cat 6a/7cable
Fully compliant with HDMI 2.0
HDCP 2.2 compliant
Supports 4K HDR
Supports audio de-embedding for each HDMI outputs
4
HDBT mirror HDMI OUT 1~4
Independent DIP switch for advanced EDID management
Supports fast switching when working with SCL-1 and PR01-RX
Package Contents
1 x PR01-0808
1 x US AC Power Cord
1 x UK AC Power Cord
1 x EU AC Power Cord
1 x IR Remote
4 x Broadband IR Receiver Cable (30 – 50 KHz)
1 x IR Receiver Cable
12 x Phoenix male connectors (3.5mm, 3 Pins)
2 x Mounting Bracket (with screws)
5
Specifications
Technical
Input 8 x HDMI IN
Input Resolutions Supported
Established Timings
1280 x 1024@75 Hz
1152 x 870@75 Hz
1024 x 768@60 Hz, 70 Hz, 75 Hz, 87 Hz
832 x 624@75 Hz
800 x 600@56 Hz, 60 Hz, 75 Hz
720 x 400@70 Hz, 88 Hz
640 x 480@60 Hz, 67 Hz, 72 Hz, 75 Hz
CEA Video Information Code (VIC)
Formats:
VIC = 1, 640 x 480p 59.94/60 Hz 4:3
VIC = 2, 720 x 480p 59.94/60 Hz 4:3
VIC = 3, 720 x 480p 59.94/60 Hz 16:9
VIC = 4, 1280 x 720p 59.94/60 Hz 16:9
VIC = 5, 1920 x 1080i 59.94/60 Hz 16:9
VIC = 6, 720(1440) x 480i 59.94/60 Hz
4:3
VIC = 7, 720(1440) x 480i 59.94/60 Hz
16:9
VIC = 14, 1440 x 480p 59.94/60 Hz 4:3
VIC = 15, 1440 x 480p 59.94/60 Hz 16:9
VIC = 16, 1920 x 1080p 59.94/60 Hz 16:9
VIC = 17, 720 x 576p 50 Hz 4:3
VIC = 18, 720 x 576p 50 Hz 16:9
6
VIC = 19, 1280 x 720p 50 Hz 16:9
VIC = 20, 1920 x 1080i 50 Hz 16:9
VIC = 21, 720(1440) x 576i 50 Hz 4:3
VIC = 22, 720(1440) x 576i 50 Hz 16:9
VIC = 29, 1440 x 576p 50 Hz 4:3
VIC = 30, 1440 x 576p 50 Hz 16:9
VIC = 31, 1920 x 1080p 50 Hz 16:9
VIC = 32, 1920 x 1080p 23.97/24 Hz 16:9
VIC = 33, 1920 x 1080p 25 Hz 16:9
VIC = 34, 1920 x 1080p 29.97/30 Hz 16:9
VIC = 39, 1920 x 1080i 50 Hz 16:9
VIC = 41, 1280 x 720p 100 Hz 16:9
VIC = 42, 720 x 576p 100 Hz 4:3
VIC = 43, 720 x 576p 100 Hz 16:9
VIC = 44, 720(1440) x 576i 100 Hz 4:3
VIC = 45, 720(1440) x 576i 100 Hz 16:9
VIC = 47, 1280 x 720p 119.88/120 Hz
16:9
VIC = 48, 720 x 480p 119.88/120 Hz 4:3
VIC = 49, 720 x 480p 119.88/120 Hz 16:9
VESA Formats
800x600@60Hz, 1024x768@60Hz,
1280 x768@60Hz, 1280x800@60Hz,
1280x960@60Hz, 1280x1024@60Hz,
1360x768@60Hz, 1366x768@60Hz,
1440x900@60Hz, 1600x900@60Hz,
1600x1200@60Hz, 1680x1050@60Hz,
1920x1200@60Hz
7
SMPTE Formats
1280x720p@50Hz, 59.94Hz, 60Hz
1920x1080p@50Hz, 59.94Hz, 60Hz
3840x2160p@24Hz, 25Hz, 30Hz, 50Hz,
60Hz
4096x2160p@24Hz, 25Hz, 30Hz, 50Hz,
60Hz
Input Audio Supported PCM 2.0
Output
8 x HDMI Out
4 x HDBT Out
8 x Audio Out
Output Resolutions Supported
VESA Formats
800x600@60Hz, 1024x768@60Hz,
1280x768@60Hz, 1280x800@60Hz,
1280x960@60Hz, 1280x1024@60Hz,
1360x768@60Hz, 1366x768@60Hz,
1400x1050@60Hz, 1440x900@60Hz,
1600x900@60Hz, 1600x1200@60Hz,
1680x1050@60Hz, 1920x1200@60Hz
SMPTE Formats
1280x720p@50Hz, 60Hz,
1920x1080p@50Hz, 60Hz,
3840x2160p@24Hz, 25Hz, 30Hz, 50Hz,
60Hz,
4096x2160p@24Hz, 25Hz, 30Hz, 60Hz,
Output Audio Supported Output Audio Supported - Pass through
Maximum Data Rate 18Gbps
Control Method Fron
t panel, IR, RS232, Web GUI and
Table of contents
Other Harman Matrix Switcher manuals
