Haojiehua H1 User manual
VER: 1.3
Thank you for purchasing this air mouse. You can use it for emails, chat ,
remote control, message input and games . It is compatible with PC, Laptop ,Mac
OS, Linux, HTPC, IPTV, Google Android Smart TV Box, XBMC, Windows 2000 XP
/Vista/7/8/10.Use it with your Android box or smart TV on your sofa or browse
the internet in the most comfortable fashion.
Overview
Quick Start
- Plug the USB receiver into USB interface of host device(PC, laptop, smartTV etc)
System Requirements
- HID compatible USB HOST device
- Window XP, Vista,7/8/10, Linux, Android OS (With standard USB interface)
- Open the battery compartment at the bottom
of the product and mount the lithium battery
Note: Please pay attention to the upside and
Function Overview
-Air mouse(positive side): somatosensory mouse functions (including the mouse
moving, left mouse button , right mouse button) and remote control functions.
-Keyboard (negative side): virtual keyboard function which can supply the letter
input.
-Touchpad(negative side): normal touchpad functions(including the mouse moving,
single-finger click, double-fingers click and scroll the screen etc).
Note: Please pay attention to the upside and
downside of the battery)
Operation Mode
-It returns to touchpad mode automatically after pressing “enter” or “esc” in
keyboard mode.
-You can press and hold the side key and the other finger(s) operate on touch
pad to realize the common controls. For example the Enter / Esc / Left / Right / Up
/ Down functions.
Keys Descriptions
1. Only the colorful keys can save
learned infrared code.
2. Shortcut key combinations
a) + for 3 seconds:
airmouse speedup.
b) + for 3 seconds:
airmouse slow down.
c) + for 3 seconds:
c) + for 3 seconds:
erase all stored infrared code.
3. Pressing mode switch key
can switch between keyboard
mode and touchpad mode
when the negative side is
upward.
In the air mouse mode(postive side), we can press the key “IR” to learn the ir code.
Of course, only read, green, yellow, blue, and power key can save the learned ir code.
For the details of learning. Pls refer to the following steps.
1. Press the “IR” key and the red led starts flashing to indicate that it has entered the
infrared learning status. If there is no any operation, it will exit the learning status in 6
seconds.(press the “IR” key one more time also exit the IR learning status)
2. Close the infrared emitting diode of IR remote control to the top of this product
within 5cm.
IR Learning
within 5cm.
3. Press and hold the IR key that needs to be learned. If the study is successful, the red
light will keep bright. Otherwise, please repeat step 3.
4. Press one of the colorful keys(except “IR” key), the learned infrared code will be
stored into this key.
5.Please repeat the step 3 if you need to learn more.
6. Press the “IR” key to exit the IR learning status.
Notes: 1.Press the and at the same time and hold them for over 3 seconds
to erase all stored infrared code.
2. Only part of infrared codes can be learned.
In touchpad mode, the following touch gestures are supported in addition to the
mouse movement function.
Touch Gestures (touchpad mode)
Drag and Drop:
As if you were clicking and holding the mouse button down while moving it.
Perform a double tap and move your finger. Release it when you’re done.
On the negative side, we can press and hold the side key and the other finger(s)
operate on the touchpad to get the common controls. For example the Enter / Esc /
Left / Right / Up / Down functions (as the figure shows below).
Shortcut Touch Gestures
Indicators
Positive side:
- Red light:
- It blink slowly means product is in low voltage status and be on in charging status.
- It blink fast means wireless part can not be connected(make sure the dongle is
plugged into usb port).
- backlit(backlit version)
Negative side:
- : It keeps on means product is in touchpad mode
- For power saving, the touchpad will enter into sleep mode when there is no any
operation in 3 minutes or there is wirelss disnnection in 10 seconds.
- Press any button to wake it up.
- : It keeps on means product is in keyboard mode
- the above two light blink mean the same with positive red light.
Charge LED: - It keeps on means the product is in charging status.
Power Saving
- The extension usb cable can be used for charging. It can not be used for digital
connection.
- Re-pair: If the red LED flash fast , It means the product needs to be paired with usb-
receiver. As for how to pair, please try the following steps:
- Step1: Pull out the usb receiver and battery of airmouse.
- Step2: press and hold the power key, and then mount the battery. The red LED
flash slowly means the porduct has been in pair status.
- Step3: Insert the usb receiver into your main device’s usb port and put the
remote closer to the receiver within 20cm. The red LED will be off in 1s which
Please Note
remote closer to the receiver within 20cm. The red LED will be off in 1s which
means the pairing succeeds. If it fails for the first time, you need repeat Step1-3
again. (note: Please keep the keyboard full power before pairing.)
-About signal interference: specialling for android TV box and smart TV. Large size
monitor device always has some signal do not work as well . When you press
a, ”AAAAA …” will appear. In this case you can use the a extension cable to solve
it. Please plug USB receiver to the available port, then pair and use remote
keyboard.
Table of contents
