Hansol H550 User manual
User’s Guide
H550(B15HF)
TFT-LCD Monitor
Regulatory Information.......................................................................................................................... 2
Introduction
Package ....................................................................................................................................................3
The range of control Angle ....................................................................................................................... 3
Connection to Signal Source .................................................................................................................... 4
Controls
Front panel ................................................................................................................................................5
Functions .................................................................................................................................................. 5
Adjusting OSD .......................................................................................................................................... 6
Power Management Feature................................................................................................................11
Standard Signal Table ...........................................................................................................................11
Specifications ........................................................................................................................................ 12
Pin assignment table D-Sub Mini 15pin connector ...................................................................... 13
Troubleshooting .................................................................................................................................... 14
Table of Contents
TFT-LCD Monitor
2
Regulatory
Information
- FCC Information
Caution
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s
authority to operate the equipment.
- Canadian Notice This Class B digital apparatus meets all requirements of the Canadian Interference Causing Equipment Regulations.
- Avis Canadien Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le matériel brouilleur du
Canada.
- Energy Star As an ENERGY STAR partner, Hansol Electronics Inc. has determined that this product meets energy Star
guidelines for energy efficiency.
Notice
The information contained in this document is subject to change without notice.
This equipment has been tested and found to comply with limits for a class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation.
This equipment can generates, uses, and radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause unacceptable interference to radio and television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures.
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced Radio/TV technician for help.
TFT-LCD Monitor
3
Introduction
- Package
- The range of
control Angle
LCD Monitor
UK
U.S.A/
Canada
Europe
Australia
Korea
AC Power
Cable
Signal Cable
C D
(User’s Guide & etc)
Warranty
Card
Congratulations on your purchase of this top quality color monitor!
The items illustrated below are contained in the carton.
First, be sure that your carton includes all of them.
If any items are missing or damaged, please contact your local dealer or supplier.
▲Forward 3° ▲Default ▲ Backward 30°
How to Adjust the Stand
Stereo Cable
(Option)
TFT-LCD Monitor
4
Introduction
- Connection to
Signal Source
<Power Source Connection> <Signal Cable Connection>
①
① Port for AC power cable.
② Port for Audio cable from audio source.
③ Port for Head Phone or External Speaker.
④ Port for signal cable from signal source.
⑤ Kensington Lock.
②③④ ⑤
General
For Macintosh
Adapter for Macintosh(Optional)
Refer to the table on the rear side of
the optional Macintosh adapter and
adjust DIP switch by the resolution.
1. Use 220V or 110 V.(Free Voltage)
2. Connect monitor and Signal Source via Signal cable.
3. Power on the monitor and computer.
4. Connection is finished.
Basic Connection
TFT-LCD Monitor
5
Controls
- Front panel
- Functions Power button
Power button is located in the lower center of the Front Bezel.
You can push the button to trun on/off the power.
Power Indicating LED
Dark : Power off
Green : Normal mode
Green blinking : DPMS mode or Check Signal Cable mode.
On Screen Display(OSD) Function Button
OSD buttons on the front of bezel perform the following functions.
MUTE : Press this button for mute control.
MENU/EXIT : Press this button to display menus. If you press this button when OSD is displayed, you can switch
display to the previous menu and exit menu.
SELECT/AUTO : Press this button, when OSD is not displayed, to perform automatic setting.
When OSD is displayed, You can select icons.
POWER : Power button.
+/ , –/ : By pressing these button when OSD is displayed, You can move cursor into the menus which
you want. After press the SELECT button, you can change gauge level or select submenus.
When OSD is not displayed, you can adjust brightness or contrast.
VOLUME : Press this button for volume control.
–/ BUTTON
MENU/EXIT BUTTON
SELECT/AUTO BUTTON
POWER BUTTON
(Power indicating LED)
+/ BUTTON
MUTE BUTTON VOL BUTTON
TFT-LCD Monitor
6
Controls
- Adjusting OSD
– + SELECT – +
MENU – + SELECT
Brightness & Contrast
1. Press the MENU button to access main menu.
2. Use –,+ to move Brightness and Contrast ICON.
3. Press SELECT button into the submenu.
Brightness
1. Use –,+ to move Brightness ICON.
2. Press SELECT button to select it.
3. Use –,+ to adjust the brightness.
Contrast
– + SELECT – +
1. Use –,+ to move Contrast ICON.
2. Press SELECT button to select it.
3. Use –,+ to adjust the contrast.
Clock Phase
MENU – + SELECT
1. Press the MENU button to access main menu.
2. Use –,+ to move Image ICON.
3. Press SELECT button into the submenu.
TFT-LCD Monitor
7
Horizontal Position
Vertical Position
– + SELECT – +
1. Use –,+ to move H-Position ICON.
2. Press SELECT button to select it.
3. Use –,+ to adjust display left or right.
According to the characteristic of video card, control range can be changed.
Phase
– + SELECT – +
1. Use –,+ to move V-Position ICON.
2. Press SELECT button to select it.
3. Use –,+ to adjust display upward or downward.
– + SELECT – +
1. Press –,+ to move Phase ICON.
2. Use SELECT button to select it.
3. Use –,+ to correct fine trembling or Video noise.
According to the characteristic of video card, control range can be changed.
Clock
– + SELECT – +
1. Use –,+ to move Clock ICON.
2. Press SELECT button to select it.
3. Press – or + to remove vertical noise.
(Adjusting clock phase is required after the adjustment of clock.)
TFT-LCD Monitor
8
Color
MENU – + SELECT
1. Press the MENU button to access main menu.
2. Use –,+ to move Color ICON.
3. Press SELECT button into the submenu.
Preset Color
– + MENU
1. Use –,+ to select the Mode 1, and Mode 2.
2. Press the MENU button to return previous state.
Mode 1 : Reddish white Mode 2 : Bluish white
User Color
– + SELECT – +
1. Use –,+ to move User color ICON.
2. Press SELECT button to select it.
3. Use –,+ to increase or decrease each color.
OSD
MENU – + SELECT
1. Press MENU button to access main menu.
2. Use –,+ to move OSD ICON.
3. Press SELECT button into the submenu.
TFT-LCD Monitor
9
OSD H-Position
– + SELECT – +
1. Use –,+ to move OSD H-Position ICON.
2. Press SELECT button to select it.
3. Use –,+ to adjust OSD left or right.
OSD V-Position
– + SELECT – +
1. Use –,+ to move OSD V-Position ICON.
2. Press SELECT button to select it.
3. Use –,+ to adjust OSD upward or downward.
OSD Time
– + SELECT – +
1. Use –,+ to move OSD Time ICON.
2. Press SELECT button to select it.
3. Use –,+ to adjust OSD display time.
4. Press Menu button to return main menu.
Special
MENU – + SELECT
1. Press the MENU button to access main menu.
2. Use –,+ to move Special ICON.
3. Press SELECT button into the submenu.
TFT-LCD Monitor
10
Language
MENU – + SELECT – +
1. Use –,+ to move Language ICON.
2. Press SELECT button to select it.
3. Use –, +to select language.
Factory Reset
1. Use –,+ to move the Factory Reset ICON.
2. Press SELECT button to return to default setting
– + SELECT
Information
MENU – + SELECT
1. Use –,+ to move the Information ICON.
2. Press SELECT button to select it.
You can know display information
* Accoding to the characteristic of video card, display information can be incorrect.
Sound(Option)
MENU – + SELECT or VOL BUTTON
1. Use –,+ to move Sound ICON.
2. Press SELECT button to select it.
3. Use –,+ to control volume.
Other manuals for H550
1
This manual suits for next models
1
Table of contents
Other Hansol Monitor manuals
Hansol
Hansol 730D User manual
Hansol
Hansol H700TD User manual
Hansol
Hansol 19Inch (Viewable size 18 ) High Resolution Color Monitor... User manual
Hansol
Hansol H950 User manual
Hansol
Hansol D19AL User manual
Hansol
Hansol 730E User manual
Hansol
Hansol D19BL User manual
Hansol
Hansol E19AL User manual
Hansol
Hansol D17CL User manual
Hansol
Hansol H530 User manual
