HANSEO HS-1000FS User manual
- 1 -
Manual
HS-1000FS
Hydraulic detachable multi-purpose vehicle
｢ Please read in advance for your safety｣
HANSEO PRECISION INDUSTRY CO.,LTD
A/S Tel +82 41) 529 3065
Fax +82 41) 529-3005
In order to use the machine safely and efficiently, be sure to read this manual
thoroughly before use.
(If it is lost, it must be purchased separately. Be careful with storage.)
The product warranty is written in this manual. The appearance and specifications
of the product are subject to change without prior notice for product improvement.
- 2 -
1. Safety work
2. Name of each part
3. Handling and operation of each part
1) Prevention and control equipment
2) GX-100A high pressure pump
3) high pressure hose reel
4) high pressure hose
5) hydraulic oil
4. Operation steps
1) engine operation
2) Ventilation part operation
3) side nozzle
4) outrigger
5) reel hose
5. Inspection and maintenance
1) Inspection of each part
2) Inspection before starting the engine
3) Inspection after engine start
4) Maintenance tips
6. First aid measures
7. Vehicle inspection
3
10
11
13
16
17
18
19
19
20
20
21
22
23
25
26
27
29
- CONTENT -
We sincerely thank you for always using
Hanseo Precision Co., Ltd.
In order to use it safely and efficiently, please
read the instruction manual to the end before
use, and fully understand the precautions
before use, the characteristics of the machine,
and how to use it.
- 3 -
1. Safety work
Failure to observe the precautions described here may result in
injury, accidents, or damage to machinery, including death. Before
driving, read these precautions and the markings attached to the
machine carefully, and follow these instructions to ensure safe and
comfortable work.
※ Be sure to observe the mark below as it is a particularly
important item for safety.
① If you do not follow danger it indicates that you will be killed or
seriously injured.
② If you do not follow warning here is a risk of death or serious
injury
③ If you do not follow caution it indicates that there is a risk of
injury.
① ② ③
1) Manual
Be sure to read the user manual.
Be sure to read the instruction manual before use, and
Please read the operation method and precautions.
Also, in actual work, it is flat and has a wide view.
Practice the operation method in a good place.
Incorrect usage will cause accidents.
- 4 -
When lending a machine to another person, explain how to
handle it.
When lending or transferring the machine to a person other than the
user, give this instruction manual together, explain how to use it, and
instruct them to read the instruction manual.
Incorrect usage will cause accidents.
2) Worker's condition
These symptoms and these people do not drive.
Those who fall under the following items should not drive or work.
◦ When you are unable to concentrate on your work due to overwork,
illness, the influence of drugs, or other reasons.
◦ When drinking alcohol. ◦ When you are pregnant.
◦ People under the age of 18.
◦ People who do not know how to operate and use the machine
3) Work clothes
Dress appropriately for the job.
When working, wear clothes suitable for the job.
Too loose clothes. Clothes that are uncomfortable to use such as
fluffy clothes, headbands, and shawls
Be careful to prohibit it.
◦ Wearing a long sleeve top
◦ Wear long pants
◦ Wear a helmet or work hat
◦ Wear shoes that do not slip well
◦ Wear a protective mask for safety
Failure to observe the above may interfere with machine operation,
- 5 -
get caught in a rotating object, or slip and fall.
4) Machine modification
No mechanical modification
Modification of the machine is strictly prohibited. Do not modify.
When replacing parts for consumables or repairs, be sure to use our
genuine parts.
Please purchase and use.
Failure to do so can lead to death or damage to the machine.
5) Inspection
Covers must be attached.
Covers removed for inspection and cleaning must be attached intact.
Also, replace deformed covers.
Failure to do so may result in a winding accident or safety hazard.
Even minor failures are repaired and used.
If an abnormal sound or strange smell occurs during work,
immediately stop the engine, check each part, and contact the store
where you purchased the product or the A/S department of the head
office. Repair even minor failures before use. Failure to do so will
lead to malfunction.
Check and clean.
Before using the machine, be sure to inspect and clean it. Also,
regular inspections must be followed to ensure safe and long-term
use of the machine.
- 6 -
When inspecting and cleaning each part, fix the wheels in a flat, hard
place, stop the engine, and run. Failure to do so may lead to
accidents, injuries, breakdowns and overturns.y lead to accidents,
injuries, breakdowns and overturns.
Inspection and cleaning should be performed after the
overheated part has cooled down.
Check and clean after the engine body, muffler, and overheated parts
of the rotating material have sufficiently cooled down. Failure to do
so may result in burns.
After use, be sure to clean it on the same day.
When washing with water, be sure to wipe off the moisture and apply
machine oil or grease to the friction area to prevent rust. Also, start
the engine to remove any water that has accumulated in the fan
cover.
Failure to do so may lead to machine breakdown or accidents due to
rust.
6) Fuel
No fire when refueling.
No fire when fuel is being supplied or when
fuel is next to it. Do not smoke or get
close to flames. Failure to do so will ignite
the fuel and lead to fire. Be sure to use
unleaded gasoline for automobiles as fuel,
and do not use leaded gasoline, fake gasoline, or denatured gasoline.
It adversely affects each part of the engine and leads to engine
trouble or breakdown.
- 7 -
Refueling and refueling are performed after the engine has
cooled down.
Never open the fuel cap, refuel or refuel while the engine is running
or when the engine is hot.
Failure to comply will lead to fire.
Watch out for fuel leaks.
Because the fuel hose is made of rubber, it may be damaged by UV
rays, etc. If the hose breaks, fuel leakage will occur, so be sure to
check. If damage is noticeable, contact the agency or head office A/S
to exchange for genuine parts. Failure to comply will lead to fire.
Check or change engine oil and hydraulic oil regularly.
There is no breakdown when you need to change engine oil
regularly. In addition, regular cleaning of the air cleaner must be
observed. Oil should be lubricated up to the appropriate line shown in
the figure.
7) Sealed indoor
Pay attention to the exhaust
gas of the engine.
The exhaust gases from the engine are harmful. Do not start the
engine in an enclosed indoor space. The engine is used outdoors with
good ventilation. Specially when starting indoors, provide adequate
ventilation. Failure to observe this will lead to poisoning by exhaust
gas, leading to death
- 8 -
8) Attention when working
Pay attention to obstacles in all directions when working.
When working, pay attention to obstacles (slope, cliff topography) in
all directions.
Failure to do so may result in serious accidents, resulting in death,
injury, or machine breakdown.
Damage occurs.
Remove foreign substances around the engine.
Before use, check the engine cooling fan, air intake port, air cleaner
air intake port, and muffler for foreign substances such as garbage.
Failure to do so can lead to engine trouble, overheating, and fire.
Do not put your hand on the belt
rotating part.
Do not put your hand while driving.
Failure to do so can lead to disability
accidents such as hand amputation or death.
Do not put your hand inside the cover.
There is a rotating object inside the belt cover. Do not put your
hands or feet in the gap.
Failure to do so will lead to injury.
Do not panic and respond in an emergency.
- 9 -
Incorrect usage is the cause of an accident. If you do not understand
how to operate with great care and know how to operate without
embarrassment, you will not be able to make appropriate judgments
in an emergency, and risk avoidance is impossible. This can lead to
deaths, injuries and machine breakdowns.
When starting the engine, be sure to check the surrounding safety.
Before starting the engine, check the safety of people and objects
around you and make sure that all switches are “OFF”.
Failure to comply will lead to unexpected accidents such as runaway.
No sudden start, sudden stop, or sudden turn
When rotating in uneven areas, slow down sufficiently.
Failure to do so can lead to fall or fall and damage to the machine.
Park on flat ground.
When leaving the machine, the engine will stop on a level, sturdy
surface. Parking on a slope is dangerous, so avoid dangerous places
as much as possible.
Failure to do so will cause the machine to move and lead to an
accident.
8) Caution on the slope
Driving on a slope is at a low speed.
- 10 -
When driving on a slope, or when preventing or preventing
quarantine, reduce the speed sufficiently.
Failure to do so may lead to a fall, fall or damage to the machine.
On slopes, do not put a full amount of fuel in the fuel
tank.
When using the machine on a slope, fuel may overflow, so use it
without full fuel (two-thirds is appropriate). Failure to do so will
cause fuel to overflow and lead to a fire accident.
8) Storage
The machine is stored indoors.
When storing the machine for a long period, be sure to store it
indoors, and if it is stored outdoors, cover it to prevent rain. (Short
term storage)
Long-term exposure to UV rays shortens the life of the machine.
Table of contents
