HANSCRAFT IN.K1000 User manual

USER MANUAL

IN.K1000 – HC EASY POOL

Contents

1 Hottubperformancespecications . . . . . . . . . . . . . . . . . . . . . . . . . 3

2 Preparation for the installation of the hot tub . . . . . . . . . . . . . . . . . . 4

2.1 Preparation of the place for installation and connection to electricity . . . . . . 4

2.2 Preparation for the interior hot tub installation . . . . . . . . . . . . . . . . . . . . 5

2.3 Preparation for the exterior hot tub installation . . . . . . . . . . . . . . . . . . . . 5

3 Installation of the hot tub . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

3.1 General information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

3.2 Filling the hot tub with water . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

3.3 Running the power supply of the hot tub . . . . . . . . . . . . . . . . . . . . . . . . 6

3.4 Programming of the hot tub control unit using the control panel . . . . . . . . . 6

4 Aquatic AV audio system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

5 Control panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

5.1 Touch screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

5.2 Functions of the Hot tub . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

5.3 Whirlpool Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

5.4 Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

5.5 Water care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

5.6 Adjustment of water care plans . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

5.7 Protocol of maintenance and errors . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

5.8 Date and time. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

5.9 Screen setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

5.10 Keypad Lock. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

5.11 ElectricalConguration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

5.12 WiFi . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

5.13 Miscellaneous. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

5.14 About . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

5.15 Excess water on the display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

5.16 Error messages about installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

6 Upkeep of the hot tub . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

6.1 General information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

6.2 Removalandcleaningoftheltercartridge. . . . . . . . . . . . . . . . . . . . . . . 20

6.3 Maintaining the quality of the water in the hot tub . . . . . . . . . . . . . . . . . . 21

6.4 Replacing the water . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

6.5 Cleaning the outer shell of the hot tub . . . . . . . . . . . . . . . . . . . . . . . . . . 22

6.6 Hot tub hygiene and disinfection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

6.7 Thermo cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

6.8 Upkeep of the thermo cover and upkeep instructions. . . . . . . . . . . . . . . . . 23

7 Winter and summer time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

7.1 Winter time – using the hot tub, all year operation (SLP) . . . . . . . . . . . . . . . 24

7.2 Summer time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

8 Final establishments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

8.1 Guarantee conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

8.2 Safe disposal of the product after the service life . . . . . . . . . . . . . . . . . . . 25

8.3 Warranty claims and repair services . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

9 Repair services chart. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

10 Supplements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

11 Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Hot tub performance specifications

1 Hot tub performance specifications

Performance specifications

nominal voltage:

three-phase connect. 230/400 V 50 Hz*

maximum work current: 3× 16 A

current surge: up to 3× 25 A

voltage resistance: 1 250 V/min. without puncturing

insulation resistance: >=1MΩ

water resistance: IPX5

electrical shock protection: rstlevel

*The product does not use the 400 V phase to phase voltage. It is possible to adjust

it to 1× 230 V, however, this is not recommended due to limitations of the functions.

(For more information on this connection, please refer to the Supplements, p. 26)

Stress load

heating: 1× 230 V/3 kW/13.6 A

ozone: 1× 230 V/50 Hz /80 mA

blower: 1× 230 V/0.66 kW/ 2.9 A

pump 1/1 + 1/1 + 1/1 + 0.4: 3× 2.2 kW + 0.4 kW

overall wattage (depends on the hot tub type)

: 10.66 kW/ h

protection class: I.

lighting: LED 12 V/10 W

maximum output: 20 W

humidity resistant speakers: yes

Preparation and electrical connection options – AC three-phase

current 3× 230/400 V/16 A/20 A

Ensure that the Hot tub is connected to a circuit protected by a Residual Current

protective Device with a rated tripping current of 0.03 A, at all times. It is necessary

For your own safety and the safety of your product, please observe the

following instructions. Read the following information carefully and follow

the user manual exactly when using the hot tub to avoid damaging the product

or the risk of injury. This appliance is intended for use by children 8 years of

age or older with reduced physical, sensory or mental capabilities, or lack of

experience and knowledge, provided they are under supervision or have been

instructed on the use of the product and understand the risks. Children must

not play with the product. Cleaning and maintenance must not be performed by

children without supervision.

Specifications/Preparation for the installation

to use a Type C or Type D circuit breaker with a rated current of 16 A (motor circuit

breaker) downstream of the Residual Current protective Device.

Recommended Type C or D circuit breaker (motor circuit breaker)

Hot tubs with two massage motors: 3× 16 A/C or D

Hot tubs with three massage motors: 3× 20 A/C or D

!!! THE HOT TUB MUST BE INSTALLED BY AN ELECTRICIAN WITH THE

APPROPRIATE QUALIFICATION ONLY !!!

2 Preparation for the installation of the

hot tub

Check the hot tub first before the installation. Immediately contact the

seller in case any of the parts are broken or missing. Make sure that all the

components correspond to your order

. Check the hot tub before every use.

case of any damage, do not use the hot tub.

2.1 Preparation of the place for installation and connection to

electricity

The hot tub must be installed on a at and rm enough base plate with regard to

the maximum load of the construction. For exterior installations we recommend a

construction of a monolithic concrete base plate of minimum thickness of 10 cm. It is

always necessary to pick the maximum load of the base plate with regard to the size

and weight of the hot tub. Consult with your construction supervisor. The weight is

adduced in the technical description of the hot tub.

The baths are prepared by us for an electrical wiring of 3× 230 V/400 V~ alternating

current. Therefore, use a circuit breaker 3× 16 A/C or D, alternatively 3× 20 A/C or D

and a Residual Current protective Device corresponding to this wiring. Furthermore, it

is necessary to have a cable with parameters corresponding to the rightful regulations

for this type of wiring. The cable must also have 4 usable meters at the location

of the Hot tub, so that it can be pulled through and connected to the control unit

without complications. Do not route the cable under the Hot tub!

NOYES

Preparation/Installation of the hot tubSpecifications/Preparation for the installation

2.2 Preparation for the interior hot tub installation

If the hot tub is installed in an interior space, it is necessary to comply with safety

instructions. The basic safety requirements are mainly non-skid oors and drainage in

the place of the installation in case of a water overow. It is also crucial to keep in mind

that the humidity around the hot tub will rise and can damage surrounding electric ap-

pliances. Therefore we recommend customizing the place of the installation according

to these conditions. The hot tub should be accessible from all sides for future repair

services. If it is not suciently accessible during the guarantee period, the owner has

a duty to ensure the access.

2.3 Preparation for the exterior hot tub installation

If the hot tub is installed in an exterior space, it is necessary to comply with safety

instructions. The basic safety requirements are mainly non-skid oors and water drain-

age in case of a rainfall or water overow from the hot tub. Therefore we recommend

customizing the place of the installation according to these conditions.

3 Installation of the hot tub

Warning: connection to electricity must be done according to norms valid in

CzechRepublicČSN332000-7-701

3.1 General information

We strongly recommend you to hire professionally trained and qualied technicians

for the process of installation. If you decide to install the hot tub by yourself, please

abide by the following instructions.

a) Carefully remove all the packaging material from the hot tub and position the hot

tub on a beforehand selected place of installation.

b) Demount the front panel on the side of the hot tub control panel. Demount the

upper cover of an electrical wiring under which you can nd a residual current de-

vice, a ground fault circuit interruptor (if it is part of the hot tub equipment) and

a ground staple. The connection itself must be done by a person with an expert

qualication.

c) Every hot tub is tested in real life conditions during the production process,

therefore there is a possibility some technical parts of the hot tub have remained

slightly dirty. We recommend you to clean the surface of the hot tub using a

suitable method; lukewarm water works best for this purpose. Clean the surface

using a soft cloth only. Don't use any rough abrasive means and cloths which could

permanently damage the surface of the hot tub. If you decide to use a generic

cleaning detergent, it cannot be aggressive towards the hot tub surface.

Installation of the hot tub/Audio system Aquatic

3.2 Filling the hot tub with water

Fill the hot tub with a sucient amount of water. The level of water in the hot tub

cannot ever fall under the skimmer level. If you notice a water leak, stop the water

until the defect is xed. Hot tubs do not possess the technology for water-softening

and hard water can be damaging to them. The damages caused by poor handling and

upkeep are not covered by the guarantee.

a) Fill the hot tub through a skimmer to prevent an over aeration of the circulation

pumps.

b) Do not ll the hot tub with water of temperature over 104 °F.

c) Once the water reaches the desired level, put the cartridge lter inside the

skimmer. Tilt the lter during the installation to prevent air bubbles. Only after

removing the air from the lter, install the lter into place.

3.3 Running the power supply of the hot tub

If the hot tub is connected by a moving supply cable, this cable cannot come in con-

tact with sharp objects or be exposed to external forces. Therefore we recommend

putting the supply cable inside a protective case. Turn on a residual current device

intended for a hot tub.

3.4 Programming of the hot tub control unit using the control

panel

Now you can start the programming of the hot tub. The process is described in the

chapter “Control panel”. After you are nish the programming, cover the hot tub with

a thermo cover and let the water temperature to stabilize. Check the water level

inside the hot tub regularly.

4 Aquatic AV audio system

Aquatic AV audio system AQUATIC/MY MUSIC (relevant only for hot tubs equipped

with the system)

If you want to play music from an external device, it is necessary to pair the device

with the hot tub rst (phone, tablet, computer). Turn on the bluetooth system on your

external device and search for the AQUATIC device. The connection is not restricted by

a code and only one connection can be active at a time. You can play music immediately

after the devices are successfully paired. You can control all the functions of the audio

system on your connected external device.

Control panelInstallation of the hot tub/Audio system Aquatic

5 Control panel (IN.K1000)

Notification icons

Icons on the top right of the screen display the status of the accessory providing

additional functions.

5.1 Touch screen

No mechanical buttons, keys or switches! Digital mode and function selection

circle, one-touch activation of last used settings, interactive icons and on-screen

notications – these are the elements of the Smart Touch user interface, designed

so that the user can intuitively communicate with his Hot tub and thus easily use its

features.

Aquasoul Pro

The audio

system is ON

Aquasoul Pro

The audio

system is OFF*

in.mix

Is installed

WiFi

The system

is connected

to WiFi

WiFi

The system is

disconnected

from WiFi

ALL- ON/ALL- OFF

BUTTON (one-touch

activation of last

used settings)

Mode selection

circle (settings and

accessories)

On-screen system

notications and

reminders

On-screen interactive icons

(main functions of Hot tub)

Function

selection circle

(settings and

other)

*The audio system is installed beyond the interface of the control panel, and thus

the icon in the interface is non-functional.

Control panel

Switch on the control panel

If no contact is made, the screen will switch

o 3 minutes after the last pump shutdown.

Touch the screen to switch it on. Then, follow

the instructions on the screen to access the

main page.

Whirlpool mode

To select the whirlpool mode, slide the selection

circle to the left or down until the whirlpool

icon is highlighted in the centre. The home page

of the ON/OFF button, arrows pointing up and

down, water temperature, notications and

selection of display options will show up:

– display orientation

– contrast of the display

To select an option, slide the selection circle up

or down until the desired icon is highlighted in

the centre.

ALL-ON/ALL-OFF button

Smart touch is equipped with a memory of

the last setting used, which can be activated

by one touch of a button. When selected, it

will either switch on or switch o all work

activities and accessories at once.

5.3 Whirlpool Mode

5.2 Functions of the Hot tub

Quick and easy step-by-step setup for controlling the main functions and

conguration of the system settings on your Hot tub using the Smart Touch screen.

On the main page you can select the following modes:

– color (with an installed in.mix)

– audio (with an Aquasoul Pro connection)

– spa

– settings

To select a mode, slide the left selection circle up or down until the desired icon is

highlighted in the centre.

Control panel

Switching accessories on and on

To start or stop an accessory (pump, air

blower, light), touch the corresponding icon.

If the accessory is on, the icons are animated.

When o, the animation stops. The icons on

the screen will reect the speed or status of

the running mechanisms in your Hot tub. If an

accessory has more than two speeds, press the

button until the desired speed is reached.

Water temperature

The temperature displayed on the bottom of the

screen represents the current temperature of the

water. Use the icon Up or down to regulate the

desired temperature. The selected temperature

will appear in blue. One step is set to 0.5. Unless

you make a change within 3 seconds, the current

temperature of the water will appear again. If

the set temperature is lower than the current

temperature, a notication will appear displaying

Cooling to xx.x. If the set temperature is higher

than the current temperature, a notication will

appear displaying Heating to xx.x. Under normal

circumstances, there will be a short delay before

the heating begins during which a notication

will be displayed under the temperature value

stating Heating suspended.

Display orientation

To adjust the display orientation settings,

slide the right selection circle until the display

orientation icon is highlighted in the centre.

Select the preferred orientation by tapping

on it.

Display contrast

To adjust the display’s contrast, slide the

right selection circle until the display contrast

icon is highlighted in the centre. Select the

preferred contrast by tapping on it.

Control panel

Sleep

If you want to put the display to hibernation

mode without waiting, select the SLEEP icon.

It is not possible to unintentionally run/stop

the pump in this mode.

5.4 Settings

You can use the settings mode to manage the settings of your appliance.

List of

displayed

items

Mode

selection

circle:

settings icon

Function selection circle:

– water care

– maintenance

– date & time

– keypad

– electrical config

– WiFi

–

about

To select the mode of settings, move the left selection circle up or down until the

Settings icon is highlighted in the centre.

Under Settings you can access the following:

– water care

– maintenance

– date & time

– keypad

– electrical conguration

– WiFi

– about

To select an item, scroll the right selection circle until the desired icon appears in the

centre or by pressing on the item in the selection list.

Table of contents

Popular Swimming Pool manuals by other brands

Piscine Solide

Piscine Solide V35018 installation manual

Bestway

Bestway STEEL PRO 56545 owner's manual

Bestway

Bestway 52385E owner's manual

GardiPool

GardiPool Quatroo 300x500 manual

Vogue

Vogue V31039 instruction manual

Intex

Intex PureSpa SC-10 user manual

Intex

Intex 128912GH manual

GRE

GRE KPCOR60 instruction manual

GRE

GRE Marbella instruction manual

Intex

Intex 126384GS owner's manual

Piscine Solide

Piscine Solide V35038 installation manual

Coleman

Coleman Power Steel 90387E owner's manual

Wilbar

Wilbar Mediterranean V35041 installation manual

GRE

GRE PBT201 Assembly instructions

Endless Pools

Endless Pools SwimCross owner's manual

GRE

GRE Vermela instruction manual

Polygroup

Polygroup Funsicle Oasis Pool user guide

GRE

GRE Mango instruction manual