5
2. Installation:
①.Connect the Matrix’s HDMI Input to signal source (eg. DVD, STB) with
HDMI cable.
②.Connect the Matrix’s HDMI Output to display device (eg.TV set) with HDMI
cable.
③.Turn on DVD, TV set and HKTM0404MH4 matrix.
④.Switch and select the Input source by button or IR remote, or by RS232
control, IP control.
3. Operation:
1).Front Panel Button Control:
①.Press the Out1 button in front panel, number in the digital display will be
changed correspond to each time press. For example, if Out1 LED digital
displays “1”, it stands Out1 is connecting to HDMI Input1 source. If press the
Out1 button for another second, Out1 displays “2”, it stands Out1 is connecting
to HDMI Input2 source. When Out1 switch from 1 to 4, the Out1 will cycle back
and forth correspondingly.
②.Other button operations and display refer to①.
2).Front Panel IR Control:
The Matrix can be operated by IR remote.
1)There are two switch methods for OUT1
①Each time press the left arrow, digital tube digital decline,
the corresponding input signal source will be switch to
OUT1.Each time press the right arrow, digital tube digital
increase, the corresponding input signal source will be switch
to OUT1.
②1,2,3,4, show that four signal sources, if press each of
these number 1,2,3,4,the corresponding input signal source
will be switch to OUT1.
2)The same switch operating principle for OUT2,OUT3,OUT4.
