Hanatech MULTISCAN plus User manual

EUT Type: Automotive Handheld Scantool

FCC ID : RZXMSPLUS

Test Report No.: GETEC-E3-05-013

FCC Class B Certification

APPENDIX G

: USER’S MANUAL

Hanatech Co., Ltd. Chapter 1

Chapter 1 - 1

Safety and Warranty

About this Manual

The contents of this manual are the result of contributions by dozens

of individuals all who have added their vital expertise and experience to

the evolution of the contents of this manual.

The information contained in this manual may contain printing errors

and is subject to change without notice according to product upgrade.

Hanatech shall not be liable for errors contained herein or for incidental

or consequential damage in connection with the furnishing, performance,

or use of this material.

No part of this manual may be photocopied, reproduced, or translated

to another language in any way without the prior written consent of

Hanatech Co., Ltd.

Using this Manual

It is recommended that the user become familiar with the

operating procedures, terminologies and information contained

within this user’s manual. This will help to increase the user’s

effectiveness with this equipment.

Vehicle system familiarity

While this equipment provides very powerful functions with extensive

vehicle coverage, it cannot replace knowledge and skill. To get the

most out of this equipment, a full understanding of vehicle systems is

required. It is recommended that the equipment be used in conjunction

with the original service manual for the vehicle being tested.

The equipment is designed for use by trained service personnel and

this manual assumes that the service technician who is going to use this

equipment has a familiarity with vehicle electronic control systems,

however, the latest service manuals and bulletins should always be

referenced before using this equipment.

USER MANUAL For MULTISCAN plus

Chapter 1 - 2

I. SAFETY INSTRUCITONS -----------------------

Thank you for purchasing MULTISCAN plus. To get the maximum performance of

the equipment, please carefully read this manual first, and keep it at hand.

On delivery inspection

When the equipment is delivered, a check should be made for any damaged or

missing components. If the unit is damaged or fails to operate according to the

specifications, contact your local distributor or the manufacturer, Hanatech Co., Ltd.,

Hana bldg., 80-1 Songjung-dong, Gumi-shi, Kyung-buk Republic of Korea 730-913.

In the unlikely event the equipment requires shipping back to the manufacturer, please

use the original packing material.

Safety symbols

The following symbols are used throughout this manual:

DANGER This mark means that dangerous consequences may

arise, with the possibility of death or serious injury to the

user, if the machine is handled incorrectly.

WARNING This mark means dangerous consequences may arise,

with the possibility of somewhat serious injury to the user

and or damage to the machine and facilities, if the

equipment is handheld incorrectly.

SYMBOL Description

This symbol is affixed to locations on the equipment where

the operator should consult corresponding topics in this

manual (which are also marked with the symbol) before

using relevant functions of the equipment. In the manual,

this symbol indicates explanations that are particularly

important that the user is expected to read the manual before

using the equipment.

This symbol represents DC (Direct Current)

Hanatech Co., Ltd. Chapter 1

Chapter 1 - 3

Safety guideline

In order to ensure proper operation and satisfactory performance, observe the

cautions listed below.

DANGER

This equipment is designed to comply with IEC61010-1 safety standards, and

has been tested for safety prior to shipment. Excessive high voltage measurement

or improper operation could result in personal injury, as well as damage to the

equipment or the vehicle. Please read this manual carefully and be sure that you

understand its contents before using the equipment.

The manufacturer disclaims all responsibility for any accident except for that

resulting due to defect in its product.

WARNING

For safety reasons, this equipment should not be used to

measure circuits carrying more than 30Vrms or 42.4V peak.

To avoid electrical accident that could result in injury or

death, do not measure voltage in excess of these limitations.

Maximum rated measurable voltage is 30Vrms or 42.4V

peak.

USER MANUAL For MULTISCAN plus

Chapter 1 - 4

II. SAFETY PRECAUTIONS -----------------------

DANGER

When an engine is running, keep the workshop area WELL

VENTILATED or attach a building exhaust removal system to the

engine exhaust system. Engines produce carbon monoxide, an

odorless and poisonous gas that causes slower reaction time

and may lead to serious injury or death.

WARNING

Brakes and wheel blocks

Apply the hand brake and block the wheels before using the test

equipment. It is highly recommended to block the wheels on

front-wheel drive vehicles because the hand brake does not hold

the driving wheels.

Drive Test

Do not drive the vehicle and operate the test equipment at the

same time. Any distraction may cause an accident. Have one

person operate the test equipment while the other person drives

the vehicle.

Never place the test equipment in front of you when driving the vehicle because the

test equipment may hit your body and cause serious injury when

the air bag inflates.

Do not try to test the SRS air bag system while driving the

vehicle as unintended air bag inflation may result.

Hanatech Co., Ltd. Chapter 1

Chapter 1 - 5

Engine Compartment

Maintain sufficient clearance between moving components or

belts while using the test equipment in the engine compartment.

Moving components and belts may catch loose clothing, test

cables or a part of your body and cause damage or personal

injury.

Electrical Components

Always turn the ignition key OFF when connecting or disconnecting electrical

components unless otherwise instructed.

Vehicle Battery

MULTISCAN plus is designed to prevent damage from reverse polarity battery cable

connection, however, it is always highly recommended to always ensure correct

polarity terminal connection.

Never lay the test equipment on vehicle battery. You may short the terminals and may

cause damage to your body, the test equipment or the battery.

To avoid damaging the test equipment or displaying false data, make sure the vehicle

battery is fully charged and the connections to the electronic control module are clean

and tight.

The warning messages above and the safety messages contained hereinafter cover

situations Hanatech is aware of. Hanatech cannot know, evaluate or advise you as to

all of the possible hazards. You must make sure that any conditions or service

procedures encountered do not jeopardize your personal safety.

USER MANUAL For MULTISCAN plus

Chapter 1 - 6

III. WARRANTY SERVICE -------------------------

Warranty Period

In principle, MULTISCAN plus is warranted to the consumer to be free of defects in

material and workmanship for the period of 3 years after the date of purchase.

If the product is found defective during this period, the product can be returned to

Hanatech and will be repaired or replaced free of charge.

Freight and repair Cost

For the repair of head unit, Hanatech covers the freight cost for the service during one

year from the date of purchase, and you can send the troubled unit to your local

distributor without having to pay the freight cost. You should consult with your local

distributor about the validity of remaining warranty period before sending the unit.

For the remaining two years, you are liable for any international cost incurred. Repair

or replacement will be provided free of charge.

When the warranty period is expired after three years, the customer must pay the

round trip freight and the repair or replacement cost.

Upon delivery

Hanatech inspects all the ordered product parts and components are included in the

package before shipment, and includes the original copy of pre-shipment inspection

report in the box. As soon as the product is delivered to you, please ensure

everything you ordered is properly checked and included referring to the pre-shipment

inspection report. If there is anything missing or damaged, you must notify the local

distributor immediately within 3 working days from the delivery date for free of charge

replacement of the parts.

In case of trouble

If you encounter any malfunction or trouble with the equipment, please refer to the

Trouble Shooting chapter in this manual. If the problem cannot be solved, please

contact your local distributor for assistance. For early identification of a fault or error,

Hanatech Co., Ltd. Chapter 1

Chapter 1 - 7

your local distributor will require the following details:

1. Symptom of problem you are experiencing

2. Serial number of the head unit

3. Vehicle information: Which specific car were you testing when the problem

occurred – Model name, Model year and system ID number if available (for Mitsubishi,

Subaru and Suzuki only: Refer to Japanese car chapter for details)

Warranty Void

Even in the effective warranty period, if the problem is found to be caused by any of

the followings, Hanatech charges the cost for round trip freight and actual cost for the

service to the customer, and the shipment back to the customer will be suspended

until the customer’s payment is duly made

1. Evidence of improper use or application of the product ignoring the cautions and

warnings stipulated in the user’s manual

2. Intentional damage or modifications to the product or user’s attempt to repair

without proper authorization

3. Any damage caused by Force Majeure including war and natural disaster

4. Loss of time, inconvenience and other consequential damage or loss

Warranty void seal

In addition to the above mentioned warranty void conditions, warranty service is not

provided in case the warranty void seal is broken or removed.

If you remove the head unit safety boot, you will see a yellow round sticker covering

one of the screw holes in the back. Please be careful not to break this seal and never

try to open the head unit without direct authorization from the manufacturer.

Bought in other countries

Only the products properly supplied by the contracted authorized local distributors are

recognizable for free of charge warranty service. Any equipment bought outside the

contracted national territory of your local distributor will be charged for service.

USER MANUAL For MULTISCAN plus

Chapter 1 - 8

FCC RF INTERFERENCE STATEMENT

Note

This equipment has been tested and found to comply with the limits for a Class B

digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful

interference in a residential installation.

The equipment generates, uses and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause harmful interference

to radio communications. However, there is no guarantee that interference will not

occur in a particular installation.

If this equipment does not cause harmful interference to radio or television reception

which can be determined by turning the equipment off and on, the user is encouraged

to try to correct the interference by one or more of the following measures;

- Reorient or relocate the receiving antenna

- Increase the separation between the equipment and receiver

- Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected

Caution

Changes or modification not expressly approved by the party responsible for

compliance could void the user’s authority to operate the equipment.

THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS

SUBJECT TO THE FOLLOWING TWO CONDITIONS; (1) THIS DEVICE MAY NOT

CAUSE HARMFUL INTERFERENCE. AND (2) THIS DEVICE MUSTACCEPTANY

INTERFERENCE RECEIVED INCLUDING INTERFERENCE THAT MAY CAUSE

UNDESIRED OPERATION.

Hanatech Co., Ltd. Chapter 2

Chapter 2 - 1

Specification and Parts

I. Specification -----------------------------------

A. Hardware

CPU: 16bit, 33MHz

RAM: 1 Mbyte (SRAM)

Program Cartridge Memory: 128Mbytes Flash Memory

Display: 320×240 Monochrome Graphic LCD with Back Light

Key Pad: 20 membrane keys, embossing type

Serial Port: USB and RS232

Printer: General PC printer

Power: DC 8~18V, 800mA or higher

B. Environmental Specification

Indoor use only

Operating temperature: Max 50℃/ 122℉

Maximum relative humidity: 80% (up to 31℃/88℉) and 50% (40℃/104℉or

higher)

Installation overvoltage categories: CATⅡ

Maximum measurable voltage: DC 30V Max

Pollution degree 2

Max. Altitude: Up to 2000m

Table of contents

Other Hanatech Medical Equipment manuals

Hanatech

Hanatech Hanascan 70 User manual

Popular Medical Equipment manuals by other brands

TekTone

TekTone Tek-CARE160 Installation and operation manual

NeuroMetrix

NeuroMetrix Quell 2.0 user manual

AMT

AMT XLR8 Quick reference guide

Medipost-Nutristoma

Medipost-Nutristoma MD300K2 instruction manual

EDAN

EDAN SONOTRAX Pro user manual

Restorative Therapies

Restorative Therapies RT300 Service guide

Gendex

Gendex Expert DC installation manual

Dexcowin

Dexcowin ADX4000W user manual

Libelium

Libelium MySignals user manual

Acelity

Acelity V.A.C.ULTA 4 user manual

Caputron

Caputron ActivaDose II tDCS quick start guide

FujiFilm

FujiFilm Sonart Features

Plinth 2000

Plinth 2000 93CDT Service manual

GE SENOGRAPHE 800T Operator's manual

GE Definium 5000 Operator's manual

Kanmed

Kanmed GE-1380 user manual

Huntleigh

Huntleigh FD1 Instructions for use

Stryker

Stryker SPR Plus Operation manual