HAMPTON BAY Lonestar 52 User manual

Hampton Bay®

International Collection

Lonestar

52" Ceiling Fan

Owner’s Manual

Lonestar

Ventilador de Techo de 52"

Manual del Propietario

Lonestar by Hampton Bay

Hampton Bay Lifetime Limited Warranty

The retailer warrants the fan motor to be free from defects in workmanship and material

present at time of shipment from the factory for a lifetime after the date of purchase by the

original purchaser. The retailer also warrants that all other fan parts, excluding any glass or

plexiglass blades, to be free from defects in workmanship and material at the time of

shipment from the factory for a period of one year after the date of purchase by the original

purchaser. We agree to correct such defects without charge or at our option replace with a

comparable or superior model if the product is returned to the retailer. To obtain warranty

service, you must present a copy of the receipt as proof of purchase. All costs of removing

and reinstalling the product are your responsibility. Damage to any part such as by accident

or misuse or improper installation or by affixing any accessories, is not covered by this

warranty. Because of varying climatic conditions in the United States this warranty does not

cover any changes in brass finish, including rusting, pitting, corroding, tarnishing or

peeling. Brass finishes of this type give their longest useful life when protected from

varying weather conditions. A certain amount of wobble is normal and should not be

considered a defect. Servicing performed by unauthorized persons shall render the warranty

invalid. There is no other express warranty. The retailer hereby disclaims any and all

warranties, including but not limited to. Those of merchantability and fitness for a

particular purpose to the extent permitted by law. The duration of any implied warranty

which cannot be disclaimed is limited to the time period as specified in the express warranty.

Some states do not allow limitation on how long an implied warranty lasts, so the above

limitation may not apply to you. The retailer shall not be liable for incidental,

consequential, or special damages arising out of or in connection with product use or

performance except as may otherwise be accorded by law. Some states do not allow the

exclusion of incidental or consequential damages, so the above exclusion or limitation may

not apply to you. This warranty gives specific legal rights, and you may also have other

rights which vary from state to state. This warranty supersedes all prior warranties.

Lifetime Limited Warranty

Date Purchased

Store Purchased

Model No.

Serial No.

Vendor No.

UPC

440-642

11289

827122520519

Safety Rules.....................................................................................................................................

Unpacking Your Fan ........................................................................................................................

Installing Your Fan ...........................................................................................................................

Installing the Light Kit......................................................................................................................

........................................................................................................................

Care of Your Fan ............................................................................................................................

Troubleshooting ............................................................................................................................

Specifications ...............................................................................................................................

Operating Your Fan

10.

11.

12.

13.

Table of Contents

1. Safety Rules

1. To reduce the risk of electric shock, insure electricity has been turned

off at the circuit breaker or fuse box before beginning.

2. All wiring must be in accordance with the National Electrical Code and

local electrical codes. Electrical installation should be performed by a

qualified licensed electrician.

3. WARNING: To reduce the risk of electrical shock and fire, do not use

this fan with any solid-state fan speed control device.

4. WARNING: To reduce the risk of personal injury, use only the two

steel screws (and lock washers) provided with the outlet box for

mounting to the outlet box. Most outlet boxes commonly used for the

support of lighting fixtures are not acceptable for fan support and may

need to be replaced, consult a qualified electrician if in doubt.

8. Avoid placing objects in the path of the blades.

9. To avoid personal injury or damage to the fan and other items, be

cautious when working around or cleaning the fan.

10. Do not use water or detergents when cleaning the fan or fan blades. A

dry dust cloth or lightly dampened cloth will be suitable for most

cleaning.

11. After making electrical connections, spliced conductors should be

turned upward and pushed carefully up into the outlet box. The wires

should be spread apart with the grounded conductor and the

equipment-grounding conductor on one side of the outlet box.

12. Electrical diagrams are for reference only. Light kits that are not

packed with the fan must be UL Listed and marked suitable for use

with the model fan you are installing. Switches must be UL General

Use Switches. Refer to the Instructions packaged with the light kits

and switches for proper assembly.

WARNING

TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR PERSONAL

INJURY, MOUNT FAN TO OUTLET BOX MARKED ACCEPTABLE FOR

FAN SUPPORT.

5. The outlet box and support structure must be securely mounted and

capable of reliably supporting a minimum of 50 pounds. Use only UL

Listed outlet boxes marked FOR FAN SUPPORT.

6. The fan must be mounted with a minimum of 7 feet clearance from the

trailing edge of the blades to the floor.

7. Do not operate the reverse switch while the fan blades are in motion.

The fan must be turned off and the blades stopped before reversing the

blades direction.

WARNING

TO REDUCE THE RISK OF PERSONAL INJURY, DO NOT BEND THE

BLADE ARMS (ALSO REFERRED TO AS BRACKETS) DURING

ASSEMBLY OR AFTER INSTALLATION. DO NOT INSERT OBJECTS IN

THE PATH OF THE BLADES.

ATTENTION

FAN INCLUDES A 190W LIMITER TO COMPLY WITH THE

DEPARTMENT OF ENERGY 2009 REGULATION. LAMPING THIS

PRODUCT OVER 190W WILL CAUSE THIS FAN TO NOT LIGHT. PLEASE

USE BULBS WITH A TOTAL WATTAGE UNDER THE 190W

REGULATION.

NOTE

READ AND SAVE ALL INSTRUCTIONS!

Unpack your fan and check the contents. You should have the following items: 14. Loose parts bag containing:

a. Blade attachment hardware

(16 screws)

b. Mounting hardware

Plastic wire connectors (3 PCs.)

13 14

WARNING

DO NOT INSTALL OR USE FAN

IF ANY PART IS DAMAGED OR MISSING.

CALL TOLL FREE 1- 877-902-5588.

1. Fan blades (5)

2. Canopy

3. Hanger bracket

5. Coupling cover

6. Fan motor assembly

Ball/downrod assembly (1)

& extra downrod (1)

7. Switch housing cover

8. Blade brackets (5)

9. Light kit.

10. Glass shades (3)

11. 4

12.

13. Balancing kit

0 Watt candelabra base bulbs (3)

Pull chain and fob (2)

Unpacking Your Fan 2.

3. Installing Your Fan

Tools Required

P h i l l i p s s c r e w d r i v e r , s t r a i g h t s l o t

screw dr ive r, adjus ta ble wre nc h, st ep

ladder, and wire cutters.

Mounting Options

If there isn't an existing UL listed mounting

box, then read the following instructions.

Disconnect the power by removing fuses or

turning off circuit breakers.

Secure the outlet box directly to the

bu ildin g s truct ur e. Us e a pprop ri at e

fasteners and building materials. The outlet

box and its support must be able to fully

support the moving weight of the fan (at

least 50 lbs). Do not use plastic outlet

boxes.

Figures 1,2 and 3 are examples of different

ways to mount the outlet box.

Note: You may need a longer downrod to

ma intai n p roper blade cl earance when

installing on a steep, sloped ceiling.

To hang your fan where there is an existing

fixture but no ceiling joist, you may need an

installation hanger bar as shown in Figure 4.

Outlet box

Provide strong

support

Recessed

outlet box

Mounting bracket

opening must be

toward the top

Outlet box

Figure 1 Figure 3

Figure 2

Figure 4

Angled ceiling

maximum

24 angle

Hanging the Fan

REMEMBER to turn off th the power. Follow

the steps below to hang your fan properly.

1. Pass the 120-volt supply wires through the

center hole in the ceiling hanger bracket as

shown in Fig. 5

2. Loose the two screws on the outlet box in

half way.

3. Attach the hanger bracket on the outlet box

using screws and spring washers provided

with the outlet box.

4. Tighten the two screws on the outlet box

securely.

5. Remove the hanger pin, lock pin and set

screws from the top of the motor assembly.

6. Route wire and safety cable exiting from the

top of the fan motor through the collar cover

and the canopy ring. Make sure the slot

openings of the canopy ring are on top.

Route the wires and safety cable through

t h e c a n o p y a n d t h e n t h r o u g h t h e

ball/downrod assembly (Figure 6).

7. Align the holes at the bottom of the downrod

with the holes in the collar on top of the

motor housing (Figure 6). Carefully insert 4.

WARNING

FAILURE TO PROPERLY INSTALL LOCKING PIN AS

NOTED IN STEP 7 COULD RESULT IN FAN

LOOSENING AND POSSIBLY FALLING.

Mounting

screws

(supplied with

electrical box)

Tab

Ceiling

mounting

plate

UL Listed

electrial

box

Figure 5 120V Wires

Pin in

locked

position

Hanger pin

Motor collar

Motor wires

Ball/downrod

assembly

Ceiling

canopy

Locking pin

Tighten

screws

firmly

Figure 6

Collar cover

the hanger pin through the holes in the collar

and downrod. Be careful not to jam the pin

against the wiring inside the downrod. Insert

the locking pin through the hole near the end of

the hanger pin until it snaps into its locked

position, as noted in the circle insert of Figure

8. Tighten two set screws on top of the fan motor

firmly (Figure 6)

9.Place the downrod ball into the hanger

Bracket socket.

CHANGING THE DOWNROD (OPTIONAL)

NOTE: Your fan comes with a 4" downrod

attached to the hanger ball. In addition you have

been provided with a 6" downrod to use if

desired. If you choose to use the 6" downrod

perform the following steps.

1. Remove the hanger ball from the 4" downrod

by loosening the set screw at the top of th

downrod which holds the hanger ball to the

downrod.

2. Slide the hanger ball down the downrod and

remove the support pin.

CAUTION

REMOVE 5 RUBBER PACKING MOUNTS

AND DISCARD BEFORE INSTALLATION

3. Insert the support pin in the holes at

thetop of the 6" downrod and slide

the hanger ball up the 6" downrod.

Make s ure th e su pp ort pin is

properly seated in the grooves in the

top of the hanger ball.

4. Tighten the set screw firmly.

Making the Electrical

Connections

NOTE: Remember to disconnect the power.

Follow the steps below to connect the fan to

your household wiring. Use the wire connecting

nuts supplied with your fan. Secure the

connectors with electrical tape. Make sure there

are no loose strands or connections.

Step 1 Connect the fan supply (black) wire and

light supply (blue) wire to the black household

supply wire as shown in Figure 7.

Step 2 Connect the neutral fan (white) wire to

the white neutral household wire.

Step 3 Connect the fan ground wire (green) to

the household ground wire.

Step 4 After connecting the wires, spread then

apart so that the green and white wires are on

one side of the outlet box and the black and the

blue wires are on the other side.

NOTE

LIGHT KITS ARE AVAILABLE AT ANY

RETAILER NEAR YOUR HOME. THE FAN IS

ALREADY WIRED TO SUPPORT THE LIGHT KIT

OPTION.

WARNING

TO REDUCE THE RISK OF FIRE, ELECTRIC

SHOCK, OR OTHER PERSONAL INJURY.

MOUNT FAN ONLY ON AN OUTLET BOX OR

SUPPORTING SYSTEM MARKED

ACCEPTABLE FOR FAN SUPPORT.

TO REDUCE THE RISK OF FIRE OR ELECTRIC

SHOCK. DO NOT USE THIS FAN WITH ANY

SOLID-STATE SPEED CONTROL DEVICE.

SUPPLY CIRCUIT

Ground

Conductor

Outlet Box

Green

Ground

Lead

Ground to

Downrod

BLACK

WHITEWHITE

BLACK

BLUE

GREEN

WHITE

BLUE

BLACK WHITE

Figure 7

Diagram indicates optional light kit wiring.

Step 5 Turn the connecting nuts upward and

push the wiring into the outlet box.

Figures 8 and 9 illustrate the wiring connections

for optional wall control.

Finishing the

Installation

Slide canopy up to the ceiling as shown in Figure

10 leaving a 1/8" clearance between the canopy

and the ceiling. Make sure you place the wires

safely into outlet box. Secure the canopy to the

hanger bracket with the four screws with your fan.

Figure 10

SUPPLY CIRCUIT

Ground

Conductor

Outlet Box

Green

Ground

Lead

Ground to

Downrod

BLACK

WHITEWHITE

BLACK

BLUE

GREEN

Figure 8

Diagram indicates optional light kit wiring.

Light Switch

WHITE

BLUE

BLACK WHITE

SUPPLY CIRCUIT

Ground

Conductor

Outlet Box

Green

Ground

Lead

Ground to

Downrod

BLACK

WHITEWHITE

BLACK

BLUE

GREEN

Figure 9

Diagram indicates optional light kit wiring.

Light

Switch

Fan Switch

WHITE

BLUE

BLACK WHITE

WARNING

MAKE SURE TAB AT BOTTOM OF HANGER

BRACKET IS PROPERLY SEATED IN GROOVE OF

HANGER BALL BEFORE ATTACHING CANOPY TO

BRACKET. FAILURE TO PROPERLY SEAT TAB IN

GROOVE COULD CAUSE DAMAGE TO ELECTRICAL

WIRING.

Outlet box

Hanger

bracket

Canopy

Screws

This manual suits for next models

Table of contents

Other HAMPTON BAY Fan manuals

HAMPTON BAY

HAMPTON BAY Everstar User manual

HAMPTON BAY

HAMPTON BAY Havenville 149*51 User manual

HAMPTON BAY

HAMPTON BAY HAWKINS YG204-BN User manual

HAMPTON BAY

HAMPTON BAY HOLLIS 52196 User manual

HAMPTON BAY

HAMPTON BAY VFB25ACLED1-5 User manual

HAMPTON BAY

HAMPTON BAY CYPRUS 220 635 User manual

HAMPTON BAY

HAMPTON BAY Spoleto II Spoleto II User manual

HAMPTON BAY

HAMPTON BAY EF200S-52 User manual

HAMPTON BAY

HAMPTON BAY ST. DAVID 51344 User manual

HAMPTON BAY

HAMPTON BAY Colonial Bamboo User manual

HAMPTON BAY

HAMPTON BAY BARROW ISLAND User manual

HAMPTON BAY

HAMPTON BAY 51332 User manual

HAMPTON BAY

HAMPTON BAY MYRON 36LGM-L User manual

HAMPTON BAY

HAMPTON BAY SIDLOW 52151 User manual

HAMPTON BAY

HAMPTON BAY Lynwood User manual

HAMPTON BAY

HAMPTON BAY Malone User manual

HAMPTON BAY

HAMPTON BAY Alida User manual

HAMPTON BAY

HAMPTON BAY LDS-BF2002 User manual

HAMPTON BAY

HAMPTON BAY 409-952 User manual

HAMPTON BAY

HAMPTON BAY Andross User manual

HAMPTON BAY

HAMPTON BAY Edgemont 324-848 User manual

HAMPTON BAY

HAMPTON BAY 68144 User manual

HAMPTON BAY

HAMPTON BAY Marlston N375B-BN User manual

HAMPTON BAY

HAMPTON BAY Landmark Plus User manual

Popular Fan manuals by other brands

ELTA FANS

ELTA FANS H03VV-F installation guide

Hunter

Hunter 20714 Owner's guide and installation manual

Emerson

Emerson CARRERA VERANDA CF542ORB00 owner's manual

Hunter

Hunter Caraway Owner's guide and installation manual

Panasonic

Panasonic FV-15NLFS1 Service manual

Kompernass

Kompernass KH 1150 operating instructions

VES

VES FALA100/12V/TR Original instructions

Vertiv

Vertiv Liebert DCD user manual

Westinghouse

Westinghouse GFP Series owner's manual

Venmar

Venmar KUBIX HRV PLUS Series user guide

Maico

Maico ECR 31 installation instructions

Sonnenkonig

Sonnenkonig Dinky instruction manual

S&P

S&P ECOWATT HXBR manual

Wider

Wider IMP03369BH instruction manual

Panasonic

Panasonic F-60DHN Operating and installation instructions

Hinkley

Hinkley HIGHLAND instruction manual

Broan

Broan 766BN installation guide

Premium

Premium PFS16022 Use manual