Haier 21FA12-AM User manual
COLOUR TV RECEIVER
OWNER'S MANUAL
Please read this manual carefully
before operating the unit, and keep
it for future reference.
The Owner's Manual for the Follow Models:
21FA12-AM,29FA12-AM,29FA11-AM
¼¼ÊõÐÔ²Ù×÷
Power on and power off
Viewing TV programs
Viewing TV programs
Program swap and auto program scan
Tuning
Automatic search
Manual search
FINE TUNE
Program Skip
Convenient picture control functions
Multiple picture modes
How to set the PICTURE BOOST
How to set the BLACK STRETCH
Time functions
Clock setting and on/off timer
REMIND PROG function
Setting the other function
How to start screen saver
AVL function
Channel exchange
Calendar function
Others
Connecting additional equipments
Troubleshooting
Specifications
»ù±¾²Ù×÷
ÆÁÄ»ÏÔʾ²Ëµ¥¼ò½é
CONTENTS
Basic Operation
Ŀ¼
Before Operation
²Ù×÷֮ǰ
Warning and Cautions
Installation
Antenna connection
Preparation for the remote control
Position of keys and plug-ins
Front and side panel
Back panel
Using the remote control
Warning and Cautions
1. When you clean the TV set, please
pull out the power plug from AC outlet.
Don't clean the cabinet and the
screen with benzene, petrol and other
chemicals.
4. To prevent the TV set from firing
and electric shock, don't expose the
TV set to rain or moisture.
2. In order to prolong the using life of
the TV set, please place it on a
ventilated place.
5. Don't open the back cover,
otherwise it is possible to damage the
components in the TV set and harm
you.
3. Don't place the
TV set in the
sunshine or near
heat source.
6. When the TV set isn't going to be
used for long time or it is in thunder
and lightening, please pull out the
plug from AC outlet and the antenna
plug from the cover of the TV set.
Explanation on the display tube
In general, it is not needed to clean the tube surface. However, necessary,
it's surface can be cleaned with a dry cotton cloth after cutting off the power.
Don't use any cleanser. If using hard cloth, the tube surface will be damaged.
Generally speaking, to enjoy a clearer picture, we recommend that you use a CATV
system or an outdoor antenna .In different places, the suitable antenna type and position
are different.
ÌìÏߵݲװ¡¡
Ò£¿ØÆ÷µÄ×¼±¸
Battery installation
Remove the batteries cover.
Insert two size AAA batteries matching
the +/-polarities of the battery to
the +/- marks inside the battery
compartment.
Tips for remote operation
The battery life should be about one year
under normal use.
If the remote control will not be used for
a long period of time or when the batteries
are worn out, remove the batteries to
prevent leakage.
Do not throw the batteries into fire. Dispose
of used batteries in the specified manner.
Do not drop, dampen or disassemble the
remote control.
Note
* It is recommended that you'd better use 75 coaxial cable to remove the
disturbance caused by airwave.
* Don't bind antenna cable and electric wire together.
twin-lead cable
coaxial cable
Antenna adapter
Plug
(additional purchase)
Mixer
additional
purchase
AC power socket
Antenna input
standard
coaxial type
Antenna connection
Preparation for the remote control
Installation
Position of Keys and Plug-ins
VIDEO
AUDIO-L
AUDIO-R
Front and side panel
1234
5
Y
Cb
L
S-VIDEO
Cr
IN
VIDEO
IN OU T
R
AU DIO
1.TV/AV :TV/AV/SVHS/DVD selection
2.VOL-:Decrease sound
3.VOL+:Increase sound
4.CH-:Select next lower channel
5.CH+:Select next higher channel
6.Menu:Access/Exit main menu
7.Power Indicator
8.Sensor Windows
9.Power:Power on/off
1. S-VIDEO Input
2.VIDEO/AUDIO Input
3.YUV-DVD component Input
4.VIDEO/AUDIO Output
5.Antena Input
Side
Front
Back panel
21345678
9
TV/AV VOL- VOL+
CH- CH+
MENU 6
1
2
3
4
5
9
87
A11: A12:
TUNE
TV/AV
FUNCTION
P.STD
SCAN TIME
CH+
CH-
VOL+
VOL- MENU
SWAP
PICTURE EXIT
Using the Remote Control
Buttons and Descriptions
TV and AV Exchange Button
Toexchange between TVand
other available videoinputs
Mute Button
Press to conceal thesound of programs.
Picture menu button
Direct-digit Choosing Button
Directly select channelnumbers
Menu Select/Adjust Button
Use this buttonto adjust themenu,
the volume andthe channels, aswell
as to controlthe game.
Program Scan Button
Picture Mode SelectButton
There are standard,Rich,User,
listen,soft five modes of picture.
Function menu button
Time menu button
Exit button
Digit Select Button
Change the channelposition number
between one digit,two-digit and three
-digit.
Swap Button
Tune menu button
Screen Display Button
DC standby button
Remote Control
MUTE POWER
CALL
In the following, they are the methods on how to power on/off the TV set with the
switches on the TV and on the remote control.
2. If the TV is in the state of standby,pressthe
POWER button on the remote control,Direct-digit
button or CH+/- button .
1. Please press the power switch to switch on AC
power supply and the power indicator will light.
Note
1.When you don't operate the TV set with a remote
control,you can turn on it directly through pressing
the +/- buttons on the TV set.
CH
2.If you want to exchange to standby status,
please press down the POWER button on the
remote control.
3.If you want to fully switch off the power supply for
the TV set, please press the power switch
button on the TV set.
Auto switch-off function
When the "Back" function is on, if an empty channel is selected or
the TV programs are ended for the day, the power will be switched
off 5 minutes later automatically. If the "OFF TIME" is on, it will be
switched off according to the presetting time. The auto power off
function does not work under video input or when the background is
off.
Power on/ off the TV set
POWERPOWER
½Óͨ/¹Ø±ÕµçÔ´
Power On and Power Off
Viewing TV Programs
Direct-digit choosing button
How to select the TV program
If the colour of a channel is abnormal
Select the desired sound.
Press the VOL+/- button to adjust the volume level.
Use the direct-digit choosing button
2. Using the CH+/- buttons
Press CH+ to increase the channel position
number.
Press CH- to decrease the channel position
number.
Press the button from 0-9 to select a one digit
channel.
If you want to select a two-digit channel, press
the Digit Select button and change it into two-
digit mode, then press the number of the
channel.
If you want to select a three-digit channel,
press the Digit Select button and change it into
three-digits mode, then press the number of the
channel.
The settings of the colour system may be
wrong. Press the TUNE button and setting
menu shown on the right will display on the
screen.
If picture colour is abnormal
Use the CH+/- buttons to select
then the VOL-/+ buttons to change between Auto,
. Press the EXIT button
to save the setting.
COLOR SYSTEM
PAL, NTSC and NTSC443
The channels amountto 218 .
Viewing TV programs
CH+
CH-
VOL+
VOL- MENU
CH+
CH-
VOL+
VOL- MENU
TUNING
COLOR SYSTEM
BAND
SKIP OFF
PROG NO
SEARCH
FINE TUNE
AUTO SEARCH
TUNING
COLOR SYSTEM
BAND
SKIP OFF
PROG NO
SEARCH
FINE TUNE
AUTO SEARCH
Swap function enables quick swap to the last watched program.
Auto scan function enables automatic successive scanning of all the programs
in memory with (each channel will last about 2 seconds)."OFF" skip status
Program swap
1
Suppose the channel number you used just
now is 8 and the channel number you are
using is 18 (as shown in the figure).
2.If you want to return to the last watched
program channel 8, you can simply press the
SWAP button.
3.If you want to return to the last watched
program channel 8, you can simply press the
SWAP button. In one word ,using the Program swap
function ,we can choose channels among the present channel and
four channels we last watched conveniently.
Auto program scan
1.If you want to select a desirable program, you
may scan all the TV programs in memory. You
can simply press the SCAN button to do this.
The programs will appear one after another
from beginning to end (each channel number
will last about 2 seconds).
2 If you want to stop the function during auto
scanning, simply press the SCAN button again.
Swap
Program swap and auto program scan
Viewing TV Programs(continued)
There are threeways of searching: auto search, searchand fine tune.
You may operate iteither on the TV or on the remotecontrol. Here is mainly about
the remote control.
Automatic search
2. Press the CH+/- buttons to select “AUTO
SEARCH".
3. Press the VOL+ button to ensure automatic
search function operates. All channels now playing
program will be automatically preset in order .
, the first program number
will display on the screen.
After
the search has finished
After searching
Press CH+/- button to check the channels.
If the color is abnormal in a certain channel,
it may be the color system has not been set
properly, so you should adjust it to the proper
system (Reference to page 6).
If you want to stop the search, just press MENU
button.
The order of the automatic search is due to the
frequency of the program, generally speaking, it is
used only at the first time you search the program,
and once the order of the program has been
confirmed, you don't have to use this function,
otherwise the order of the program will be
changed.
Press the TUNE menu button ,and the TUNING
menu shown on the right display on the screen.
Automatic search
CH+
CH-
VOL+VOL- MENU
CH+
CH-
VOL+
VOL- MENU
TUNING
BAND
SKIP OFF
SEARCH
FINE TUNE
AUTO SEARCH
COLOR SYSTEM
PROG NO
TUNING
BAND
SKIP OFF
SEARCH
FINE TUNE
AUTO SEARCH
COLOR SYSTEM
PROG NO
TUNETUNE
Tunning
Other manuals for 21FA12-AM
1
This manual suits for next models
2
Table of contents
Other Haier TV manuals
Haier
Haier 29FA1 User manual
Haier
Haier HT-3718 User manual
Haier
Haier L32D1120 User manual
Haier
Haier 21FA12 User manual
Haier
Haier 21F9D User manual
Haier
Haier HL42XP22 User manual
Haier
Haier HLTDC15 - 15" LCD TV User manual
Haier
Haier NS-F20C User manual
Haier
Haier HT-2199 User manual
Haier
Haier 29F3A User manual
Haier
Haier L32A8A Operating instructions
Haier
Haier HL42XZK2a User manual
Haier
Haier HT-3718 User manual
Haier
Haier L24F6 User manual
Haier
Haier HLC19W-A Building instructions
Haier
Haier DTA-2189 User manual
Haier
Haier 25T7A User manual
Haier
Haier L39B2180 Assembly instructions
Haier
Haier HL40BG - 40" LCD TV User manual
Haier
Haier HP-2999 User manual
