Haier DW-86L628 User manual
DW-86W420/100
490/728/828/486
Development V1
2011.2.26
Haier industrial Park,Econimic Technology
Add:
Products
User MMEMMM MMMMMMMMMMMMMMMMMMMMMMMMMMMM anual For HaierMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMM DW-86L288/388/628/386/626/
Ultra Low Temperature (ULT) Freezer
0070505464
Haier Medical and Laboratory Products Co.,Ltd.
Zone.Qingdao 266510.P.R.China
Warning: Class A equipment is intended for use in an industrial environment.
In the documentation for the user, a statement shall be included drawing
attention to the fact that there may be potential difficulties in ensuring
ele-ctromagnetic compatibility in other environments, due to conducted as
well as radiated disturbances.
13
/628
W100 81972
/
Symbol for "Manufacturer"Symbol for "Date of manufacture"
Symbol for "Consult instructions for use"
to the upper and lower horizontal lines.
The upper and lower limits of temperature shall be indicated adjacent
5.18 Symbol for "CONSULT INSTRUCTIONS FOR USE"
5.18 Symbol for "CONSULT INSTRUCTIONS FOR USE"
Complied with the requirements
of MDD 93/42/EEC annex V
5.12 Symbol for "MANUFACTURER"5.12 Symbol for "MANUFACTURER"5.12 Symbol for "MANUFACTURER"
828/100(220V~240V/50/60Hz) or 3mm for 628/100(115V~/60Hz), and the
extended.
or 220V~240V/50Hz and 220V~/60Hz for 628/100. A regulator with a capacity of
The appliance requires 220V~240V/50Hz for388/288/386/490/728/828/420
current for 20A for 628/626 (115V~/60Hz) and 16A for 628/388/288/386/626/100/
4000W or higher must be installed if the voltage if beyond the rated voltage of
10%. If the power cord needs to be extended, the extended conductor must
have a cross area of equal or greater than 2mm for 628/388/288/386/490/728/
2
2
Length must not exceed 3m.
Your Haier ULT unit is equipped with a standard three-prong power plug, rated
420/490/728/828 (220V~240V/50(60)Hz). Be aware that one of the three prongs
is for grounding purposes. Removal of the ground prong is strictly prohibited for
safety reasons under any circumstances. The electrical power plug should be
securely plugged into the power socket. A loose plug in the socket may cause fire.
the exchange of the battery.
problem need to open the machine to solve should contact the manufacture including
Components and parts can not be replaced by the customer privately either, any
The machine can not be opened and fixed by the customer privately, and all the
obvious and it should be convenience for insert and pull out.
The location for the plug inserting to the socket should be obvious and it should be
The handle is only used for lifting the door not for the whole machine.
Objects are not allowed to put on the door.
Don't remove it when Haier ULT is running.
door.
door
(except for DW-86W100)
DW-86W100
9
6.5
1145x980x1980
290 350 138 380
486 728 100 828
915x870x1980
DW-86L828
1145x900x1980
865x900x1980
769x825x1120
945x950x1980
2130x870x1020
DW-86L486 DW-86L728 DW-86W100
915x870x1641
7.5
DW-86W100
DW-86L628/388/288/386/626/486/728/828/490 DW-86W420/100
DW-86L288
5.5
230
295
490
DW-86L490
915x870x1980
1035x900x1980
18
4
DW-86L490
220
~
240
DW-86L486
DW-86L728
1035x900x1980
220
~
240
220
~
240
220
~
240
220
~
240
220
~
240
220
~
220
~
240
-240
7.Atmospheric should be within 75kPa-106kPa.
It is located inside the conrol
-240V
-240
This manual suits for next models
10
Table of contents
Other Haier Freezer manuals
Haier
Haier H3F-280WSAAU1 User manual
Haier
Haier HBF-1303AA User manual
Haier
Haier HVF430VW User manual
Haier
Haier BC User manual
Haier
Haier HTM-546W User manual
Haier
Haier MF80 Assembly instructions
Haier
Haier HF15CM10NW Assembly instructions
Haier
Haier HUF138PA - ANNEXE 181 User manual
Haier
Haier HFN-136 User manual
Haier
Haier SD-319G User manual
Haier
Haier HC-110 User manual
Haier
Haier BD-198G User manual
Haier
Haier HFZ-85 User manual
Haier
Haier HCM070EA User manual
Haier
Haier HF35CM23NW User manual
Haier
Haier SC-260 User manual
Haier
Haier SD-242 User manual
Haier
Haier JF-NC103A User manual
Haier
Haier JF-NC309A User manual
Haier
Haier HUM046EB - 02-01 User manual
