Gsertel Triton BRAIN User manual
BRAIN
User Guide
Version 6.0
triton
SMART SUPPLiES MANAGEMENT
The user interface is located on the front of the pedestal. It is congured by a screen and card reader,
located behind it.
You can see the following informaon in the home screen:
To read the card, place it over the screen horizontally
TRITON Brain User Guide
You can see your balance from the home screen approaching the card to the screen:
Navigaon buon
Informaon screen
Home Screen
Balance request
Gsertel 2 - TRITON
IPd: 10.10.1.12
Select device and tap
your ID card
Gsertel 2 - TRITON
IPd: 10.10.1.12
Remaining balance:
358.88€
TRITON Brain User Guide
Using the navigaon buon, go through the screens unl you reach the tap you want to open.
In the example, the selected tap is “WATER 1”, and as you can see in the screen, it is free, so you can open
it.
WATER: Open the tap
WATER 1: FREE
INSERT HOSE TO
CONTINUE
Once you have seledted the right tap, you can select the maximum amount of charge by long-pressing the
navigaon buon. Keep the buon hold unl you reach the desired amount.
MAXIMUM AMOUNT:
20 EUR
LIMIT:
250 EUR
TRITON Brain User Guide
Then approach your card to the screen. If the card balance is enough, the tap will be open. Otherwise, the
screen will show the message: “INSUFFICIENT BALANCE”.
If you select a tap that is being used at that moment, the screen will show the message: “OCCUPIED TAP”
Once the tap is open, the screen indicates that it is “IN USE”, as well as the card ID, the amount of water
consumed, and the starng balance:
WATER 1: IN USE
ID: D2F3F2D2
m3: 3.00
BALANCE: 442.52 EUR
WATER 1: (120 min.)
ID: D2F3F2D2
m3: 0.00
BALANCE: 442.52 EUR
It is possible that the device is congured with an inacvity meout. If that’s the case, the display will show
the ramaining me before the tap closes automacally if there is no consumpon:
To close an “IN USE” tap, you must approach the card to the screen again.
The tap status will become “FREE” again, and the screen wil show the remain balance.
WATER: Close the tap
WATER 1: FREE
INSERT HOSE
REMAINING BALANCE:
440.78 EUR
Using the navigaon buon, go through the screens unl you reach the socket you want to open.
In the example, the selected socket is “ENERGY 1”, and as you can see in the screen, it is free, so you can
open it.
ENERGY: Open the socket
ENERGY 1 : FREE
INSERT PLUG TO
CONTINUE
Note: when a socket belongs to a group (that is, when several sockets shaares a sigle meter), only one
socket of the group can be opened a me.
TRITON Brain User Guide
Once you have seledted the right socket, you can select the maximum amount of charge by long-pressing
the navigaon buon. Keep the buon hold unl you reach the desired amount.
MAXIMUM AMOUNT:
20 EUR
LIMIT:
250 EUR
If the pedestal has the plug detector enabled, you must insert the plug correctly before you can open the
socket. When the plug is detected correctly, the display will show this message:
ENERGY 1 : FREE
PLUG DETECTED
CORRECTLY
TRITON Brain User Guide
To close an “IN USE” SOCKET, you must approach the card to the screen again.
The SOCKET status will become “FREE” again, and the screen wil show the remain balance.
ENERGY: Close the tap
ENERGY 1 : FREE
INSERT PLUG
REMAINING BALANCE:
440.78 EUR
Touching the buon unl you get the last screen, you will nd the last operaon closed in the pedestal. It
shows the device, the consumpon and the key ID.
LAST OPERATION :
A1: 3,21 M3
ID: D60055B9
LAST OPERATION SCREEN
TRITON Brain User Guide
If you want to open a power outlet, you must ensure that the plug is posioned correctly.
If the system does not detect the plug correctly, the power outlet will not be opened for security reasons
Note 1. Electric Security
If the plug is unpplugged while the power outlet is open, the system will close the power outlet automa-
cally and the user will be expelled. So, the user must approach the card again to open the selected outlet
Note 2. The protecon
If there is a power outage while the outlet is open, when the supply recovers, the system will automacally
reconnect the outlet and keep in memory the user and the outlet that was open
Note 3. Automac reconnecon
In case that the pedestal losses the connecvity with the server, the pedestal will show intermiently the
message “NON NETWORKED” on the second line. Under this mode, only some operaons are allowed:
• Balance request: not available
• Device open request: only available for master keys and, if allowed by the harbouz authority, the
most frequent user on that pedestal.
• Device close operaon: all allowed
When the connecvity with the server is recovered, all the informaon of the oine operaons will be
send to the server.
Note 4. Oine Mode
LAST OPERATION :
A1: 3,21 M3
ID: D60055B9
TRITON Brain User Guide
Please, read carefully the messages shown in the screen. If you experience any problems,
contact the administrator of the port
Important
TRITON Brain User Guide
