Grundig P 37-071 User manual

COLOR TELEVISION

P 37-070

P 37-071

Connection Possibilities

Additional Information for Units sold in Great Britain

Units sold in GB are suitable for operation from a 240 V AC, 50 Hz mains

supply.

In case this appliance is supplied with a Safety Standard Approved mains lead

fitted with a non-rewireable 13 Amp mains plug which, if unsuitable for your

socket, should be cut off and an appropriate plug fitted by a qualified electrician.

The fuse and fuse holder must be removed from the plug as accidental insertion

of the redundant plug into a 13 Amp socket is likely to cause an electrical

hazard.

Note: The severed plug must be destroyed to avoid a possible shock hazard

should it be inserted into a 13 Amp socket elsewhere.

If it is necessary to change the fuse in the non-rewireable plug, the correct type

and rating (5 Amp ASTA or BSI approved BS 1362) must be used and the fuse

cover must be refitted. If the fuse cover is lost or damaged the lead and plug

must not be used until a replacement is obtained. Replacement fuse covers

should be obtained from your dealer.

If a non-rewireable plug or a rewireable 13 Amp (BS 1363) plug is used, it must

be fitted with a 5 Amp ASTA or BSI approved BS 1362 fuse. If any othe type of

plug is used it must be protected by a 5 Amp fuse either in the plug or at the

distribution board.

Important:

The wires in the mains lead are coloured in accordance with the following code:

BLUE – NEUTRAL

BROWN – LIVE

As the colours of the wires in the mains lead of your appliance may not corre-

spond with the coloured marking identifying the terminals in your plug, proceed

as follows:

Connect the BLUE coloured wire to plug terminal marked with the letter "N" or

coloured black.

Connect the BROWN coloured wire to the plug terminal marked with a letter "L"

or coloured red.

In no circumstance must any of the wires be connected to the terminal marked

with a letter "E", earth symbol , coloured green or green and yellow.

Replacement mains lead can be obtained from your dealer.

Safety and Installation

rNotes on safety

!If the television is to be built into a compartment or similarly enclosed,

minimum distances must be maintained (10 cm at the sides, 20 cm on the

top).

!Do not obstruct the ventilation openings at the back.

Heat build-up can reduce the service life of your television, and can also be

dangerous. Never place the television near heat sources.

!When setting up and using this unit, please make sure that the mains

connection wire is free and not jammed in order to avoid damage.

!Even if your television is switched off, it can still be damaged by lightning

striking the mains and/or aerial cables.

For this reason, you should always disconnect your television from the

mains and the aerial system during thunderstorms.

!Never expose the unit to moisture.

!Do not insert foreign objects into the ventilation openings at the back.

Caution! High voltage!

rInserting the batteries into the remote control handset

Insert the batteries supplied. Make sure they are inserted correctly

(markings in the battery compartment).

!When the batteries are dead, the message ”BATTERY” appears on the

picture screen.

Remove the dead batteries immediately.

We assume no responsibility for damage resulting from battery leakage.

Dead batteries must be disposed of respecting the laws on environmental

protection.

rConnecting the unit and switching on/off

Insert the plug of the aerial lead into the aerial socket Éof the TV set.

Connect the mains lead to the wall socket.

Press the ¢

IO button on the unit.

!If afterwards only the LED is lit, this indicates that the device is ready.

Now use the remote control to switch the device on by pressing one of the

0/AV...9 buttons.

Assigning Programme Positions

1st possibility

rThe Automatic Tuning System ATS

This automatic tuning system scans the entire reception range and auto-

matically stores all found programmes.

How to proceed:

Start the tuning system with the OK button.

!If the »AUTOMATIC TUNING SYSTEM« page does not appear, press the

AUX button until it does (approx. 4 seconds).

The station search procedure may last one minute and longer.

When the station search is completed, the televsion is ready for operation.

Have a good time with your new television set!

If you are not satisfied with the automatic assignment of the programme

positions, you can change the order of the programmes stored in the

station positions according to your personal preferences.

rExchanging programme positions

Example: The channel stored in programme position 2 is to be moved to

programme position 5.

Select programme position 2.

Press the iand then the OK button. The programme menu is displayed.

Enter the new programme position 02 as a two digit number by pressing

the 0and 2buttons.

Press the OK button. The procedure is completed.

Press the i button to return to TV mode.

Assigning Programme Positions

2nd possibility

rAssigning programme positions manually

Pres the iand then the OK button. The programme menu is displayed.

Use the Ǹor Ƿbutton to select the desired menu item.

Under ”PR” select the programme position to be assigned with the P+/P-

button.

”B” Selct the band UHF (C21-C69) or ----.

If ---- is selected under ”B”, the following programme posi-

tions can no longer be selected using the P+ and P- buttons.

"”TUNE” Press the P+ or P– button to display the manual search

menu.

Press and hold down the Ǹor Ƿbutton to start the search.

The search stops at each programme which can be received.

If finetuning is necessary (programme positions

1-20), briefly press the Ǹor Ƿbutton until the best

picture and sound quality is obtained.

Press the ibutton to return to the programme menu.

””S” The televsion standard (norm) cannot be changed.

"”DEC” If an encoded programme is assigned to this programme

position and an appropriate descrambler (decoder) is

connected, then select ”ON”.

Press the OK button to store the modified settings.

Press the ibutton to return to the TV picture.

P+ PR B TUNE S DEC

Ń14 UHF ﬁn0 OFF

Ľľľ--- n-------- n-------------- n-------- n-------------------- n------ıı

Sort ﬁ0…9 OK i

ĵDialogue line

The Remote Control Handset

rThe remote control buttons

0/AV…9 Select programme pos. (also AV);

switch on from standby.

ǼSwitch to standby.

TXT Sleep-Timer (AUX then TXT)

iDisplay/suppress programme position

number.

Display/suppress Teletext overview.

ʀSound on/off (mute).

P+, P– Select programme positions; move

cursor.

P+ Switch on from standby.

Change and activate certain

functions.

ǸǷ Volume;

move cursor.

AUX Preselect button for various functions.

Press and hold down 4 seconds to call

up ATS.

– v+Brightness;

– i+Colour contrast.

654

987

TP 715

SAT/TV

TXTAUX

VIDEO

VIDEO Remote control GRUNDIG video recorder. Keep VIDEO button

depressed, now press the required button.

(button F) = Frame search backwards

Ł(button E) = Frame search forward

l(button h) = Start recording

n(button AV 0) = Stop

ı(button G) = Playback

p= Program position –

P= Program position +

II (button ¢

ĭ) = Pause

SAT Remote control GRUNDIG satelliten receiver (keep SAT button

depressed and select satellite program using button por P ).

rFurther functions

Change b/w contrast: Press the AUX button then change the contrast using

the – v+button.

Programme Sleep Timer (switch-off delay 01…99 min.):

Press the AUX and then the TXT button. Use the 0…9 buttons to enter the

switch-off delay.

!Every changed value (volume, etc.) is stored after approx. 8 sec.

!Pressing AUX and then OK recovers the factory presettings.

Connection Possibilities

Connecting a video recorder, satellite receiver

or decoder (descrambler)

rConnection

Connect with an AV cable to the AV socket at the back of the set.

rOperating the connected unit

Start playback on the video recorder or switch on the SAT receiver. When

connecting a decoder, observe the chapter ”Assigning programme posi-

tions manually” on page 10.

In the menu, ”ON” must be selected under ”DEC” for the programme posi-

tion concerned.

rConnecting several external units

• For TV reception via a cable system:

Descrambler → Video recorder → TV receiver

• For satellite TV reception:

Descrambler → Satellite receiver → TV receiver

The product fulfils the requirements of the following EU guideli-

nes: 73/23/EEC Guideline concerning electrical operating units

within certain voltage limits.

89/336/EEC guideline on electro-magnetic compa-tibility.

The unit is accordance with the norms:

EN 60065, EN 55013, EN 55020

Accelerating voltage is max. 25 kV with a mean beam current of 1 mA.

Unauthorized tampering with the unit, in particular making adjustments to

the high voltage system, or installing a different picture tube, can consider-

ably increase X-ray emissions. Units so altered no longer conform to appli-

cable safety regulations and may not be operated.

220-240V, 50/60Hz (power supply control range 165 – 265V)

Power consumption approx. 38 W; in standby 9 W.

Sound output: 2 W music power (1 W sine power).

The mains cable can be plugged into the set. If you need a replacement

cable, order it at an after-sales service under the number 8290-991-307.

Subject to alterations. E. and O.E.

GRUNDIG AG ••D-90762 FÜRTH Printed in Austria•40/97

0 1 2 3 4 5 6 7 8 9

21595-941.09

Ķ= Seite 2-6

ķ= Page 7-12

ĸ= Page 13-17

ƴ= Page 18-22

ń= Pagina 23-27

Ņ= Pagina 28-32

ɾ= Sidan 33-37

į= Página 38-42

ł= Pagina 43-47

ĺ= ™ÂÏ›‰· 48-52

montags bis freitags

von 8.00 – 19.00 Uhr

* Gebührenpflichtig –

in Deutschland und

Österreich möglich

STETS FÜR SIE DA!

DEUTSCHLAND

01 80/5 30 21 22*

ÖSTERREICH

06 60/66 99*

GRUNDIG

KUNDENBERATUNGS-

ZENTRUM

Table of contents

Other Grundig TV manuals

Grundig

Grundig 43 GFB 6621 User manual

Grundig

Grundig 32 GFH 6933B User manual

Grundig

Grundig COPENHAGEN 43 CLE 6725 BP User manual

Grundig

Grundig Davio 37 User manual

Grundig

Grundig 32 GFH 6620B Reference guide

Grundig

Grundig 40 GBF 5000 User manual

Grundig

Grundig Davio 21 T 55-4501 Text User manual

Grundig

Grundig 55 GUB 8678 Operating and maintenance manual

Grundig

Grundig E2000 Series Manual

Grundig

Grundig 32 VLC 6010 C User manual

Grundig

Grundig 40 VLE 5520 BG User manual

Grundig

Grundig CUC1828 User manual

Grundig

Grundig 55 GHU 7914B User manual

Grundig

Grundig CUC 2058F User manual

Grundig

Grundig 32 GFB 6820 User manual

Grundig

Grundig T70-1020(A) User manual

Grundig

Grundig 65GOS9798 User manual

Grundig

Grundig 32GFB6722 User manual

Grundig

Grundig davio GBF6300 User manual

Grundig

Grundig 55 GHU 8500 A User manual

Grundig

Grundig Sydney Flat MF 72-7510/8 Dolby User manual

Grundig

Grundig 32 GFT 6820 User manual

Grundig

Grundig XEPHIA 42 PW 110-6605 TOP User manual

Grundig

Grundig 32GFB6628 User manual

Popular TV manuals by other brands

Philips

Philips Colour Television Service manual

Toshiba

Toshiba 27A10 owner's manual

Philips

Philips 42PF9630A/37 user manual

Hitachi

Hitachi 32FX48B operating guide

DAEWOO ELECTRONICS

DAEWOO ELECTRONICS DTQ-14V1FC Service manual

Changhong Electric

Changhong Electric uhd55b6000is Operation manual

Philips

Philips Matchline 21CE7551 operating instructions

Panasonic

Panasonic Genus TX-G10 operating instructions

Toshiba

Toshiba 19A20 Service manual

Philips

Philips 25PT4523-16 manual

Sony

Sony XBR-100Z9D reference guide

Philips

Philips PR0930X3 owner's manual

Philips

Philips Brilliance 231P4QPY user manual

Samsung

Samsung 55S9 B Series Quick setup guide

Philips

Philips 32HF9385D Käyttöopas

Sharp

Sharp LC-40FI5012E user manual

Loewe

Loewe Table Stand Reference 55 user guide

Philips

Philips 32PFH5300 Service manual