05
Instructions
Connecting to the mains supply
Ensure that the power supply voltage is in the voltage of 100V~240V.
This unit is designed
This unit is designed to use the supplied adapter only. Connecting the unit to any
other power source may cause damage to the unit. Unwind the mains cable to its
full length. Connect the mains plug to a mains socket. Make sure the mains plug is
fully inserted into the mains socket. Connect the adapter to the unit via the DC
input Socket.
(DC-18V-IN)
N
NOTE: Ensure all audio connections of the unit are connected before connecting to
the mains power socket.
Using the Bluetooth
P
Pairing a Bluetooth Device for the First Time. Press the POWER button on the unit
or the POWER button on the remote control to switch on the unit. Select and press
the MODE button repeatedly on the remote control until in Bluetooth mode or press
the Mode button repeatedly on the soundbar to enter Bluetooth mode. Using the
controls on your Bluetooth device, select the “GV-SB03” in your Bluetooth settings
to pair. Refer to the user manual for your specific device for instructions on pairing
and connecting Bluetooth devices. When successfully paired and connected, a beep
will issue f
will issue from the unit. After initial pairing, the unit will stay paired unless unpaired
manually by the user. If your device should become unpaired or you find it is unable
to connect, repeat the above steps.
Playing Audio Wirelessly
Follow the instructions for pairing a Bluetooth device. Use the controls on the
connected Bluetooth Device to select a track. To Play/Pause the track or Skip
Forwards/Backwards to a selected track, use the remote control. Audio played
through the connected Bluetooth device will now be heard.
Mains
Socket
DC
Input
