Grizzly H0625 Instruction Manual

The information contained herein is deemed accurate as of 10/6/2008 and represents our most recent product specifications.

Due to our ongoing improvement efforts, this information may not accurately describe items previously purchased. PAGE 1 OF 2Model H0625

MACHINE DATA

SHEET

Customer Service #: (570) 546-9663 · To Order Call: (800) 523-4777 · Fax #: (800) 438-5901

MODEL H0625 OSCILLATING DRILL PRESS

Product Dimensions:

Weight................................................................................................................................................................ 49 lbs.

Length/Width/Height............................................................................................................................... 17 x 9 x 23 in.

Foot Print (Length/Width)...................................................................................................................12-1/4 x 7-3/4 in.

Shipping Dimensions:

Type............................................................................................................................................................. Cardboard

Content............................................................................................................................................................Machine

Weight................................................................................................................................................................ 54 lbs.

Length/Width/Height............................................................................................................................. 14 x 18 x 10 in.

Electrical:

Switch............................................................................................................. Paddle On/Off with Safety Lockout Key

Switch Voltage......................................................................................................................................................110V

Cord Length.......................................................................................................................................................... 10 ft.

Cord Gauge....................................................................................................................................................18 gauge

Minimum Circuit Size........................................................................................................................................ 10 amp

Plug Included.......................................................................................................................................................... Yes

Motors:

Main

Type..................................................................................................................TEFC Capacitor Start Induction

Horsepower..............................................................................................................................................1/2 HP

Voltage........................................................................................................................................................110V

Prewired......................................................................................................................................................110V

Phase........................................................................................................................................................Single

Amps...............................................................................................................................................................5A

Speed.................................................................................................................................................1725 RPM

Cycle..........................................................................................................................................................60 Hz

Number Of Speeds........................................................................................................................................... 1

Power Transfer ............................................................................................................................... V-Belt Drive

Bearings........................................................................................................Shielded, Permanently Lubricated

Main Specifications:

Construction

Table Construction...................................................................................................Precision Ground Cast Iron

Spindle Housing Construction..............................................................................................................Cast Iron

Column Construction...............................................................................................................Ground Cast Iron

Head Construction................................................................................................................................Cast Iron

Base Construction................................................................................................................................Cast Iron

Paint..........................................................................................................................................................Epoxy

Head Information

Head Swivel..........................................................................................................................................360 deg.

The information contained herein is deemed accurate as of 10/6/2008 and represents our most recent product specifications.

Due to our ongoing improvement efforts, this information may not accurately describe items previously purchased. PAGE 2 OF 2Model H0625

Other Related Information

Base Length.........................................................................................................................................12-1/4 in.

Base Width.............................................................................................................................................7-3/4 in.

Quill Diameter........................................................................................................................................ 1-1/2 in.

No. Of Dust Ports..............................................................................................................................................1

Dust Port Size.............................................................................................................................................. 2 in.

Depth Stop Type.............................................................................................Threaded Rod with Positive Stop

Column Diameter......................................................................................................................................... 2 in.

Spindle Information

Spindle Taper............................................................................................................................................... B16

Spindle Travel........................................................................................................................................1-5/8 in.

Dist From Spindle To Column..............................................................................................................4-5/16 in.

Dist From Spindle To Table..........................................................................................................................8 in.

Dist From Spindle To Base........................................................................................................................ 11 in.

Table Information

Table Length................................................................................................................................................ 7 in.

Table Width..................................................................................................................................................7 in.

Table Thickness........................................................................................................................................3/4 in.

Floor To Table Height...................................................................................................................5-5/16 - 11 in.

Vertical Table Movement................................................................................................ Crank Handle Operate

Table Swing.......................................................................................................................................... 360 deg.

Table Tilt................................................................................................................................................. 90 deg.

Table Swivel Around Center................................................................................................................. 360 deg.

Table Swivel Around Column................................................................................................................360 deg.

Maximum Movement Of Work Table..........................................................................................................10 in.

No. Of T Slots....................................................................................................................................................4

T Slot Width...............................................................................................................................................5/8 in.

T Slot Length..........................................................................................................................................3-7/8 in.

Operation Information

Oscillating Stroke Length.......................................................................................................................... 1/2 in.

Swing..................................................................................................................................................... 8-1/2 in.

Drilling Capacity........................................................................................................................... 1/2 in. in Steel

No Of Spindle Speeds.......................................................................................................................................5

Range Of Spindle Speeds............................................................................620, 1100, 1720, 2340, 3100 RPM

Drill Chuck Type.........................................................................................................................B16 Key Chuck

Drill Chuck Size.........................................................................................................................................1/2 in.

Other Specifications:

Country Of Origin ................................................................................................................................................China

Warranty ............................................................................................................................................................2 Year

Serial Number Location ................................................................................................................Data Label on Head

Assembly Time ...........................................................................................................................................30 minutes

Features:

Oscillating Spindle

Dust Collection Fitting

Sanding Drum Shaft

1/2HP Motor

5 Speeds

1/32" - 1/2" Chuck

Cushioned Grip Quill Handles

Table of contents