greenmarine AWM-1200 User manual
USER MANUAL
AWM-1200 Marine Monitor
AWM-1500 Marine Monitor
AWM-1700 Marine Monitor
AWM-1900 Marine Monitor
(2nd Edition 1/4/2011)
All information contained in this manual is subject to change without notice
RECORD OF REVISION
Version and Date Page Old Description New Description Remark
January 8, 2010 all Preliminary Release
January 4, 2011 all Version 1.1 Version 1.2
TABLE OF CONTENT
RECORD OF REVISION ....................................................................................................... 0
WARNING NOTICES........................................................................................................2
1.0 INTRODUCTION............................................................................................................ 6
2.0 CONTROL AND FEATURES............................................................................................. 7
3.0 INSTALLATIONS ............................................................................................................ 8
4.0 OSD OPERATIONS....................................................................................................... 14
5.0 TECHNICAL SPECIFICATION........................................................................................ 30
7.0 MAINTENAINCE AND TROUBLESHOOTING.................................................................... 35
1
TABLE OF CONTENT...................................................................................................... 1
IMPORTANT INFORMATION........................................................................................... 4
PACKING LIST...................................................................................................................5
.......................................................................................... 34
6.0 ORDERING INFORMATION
WARNING
Potential Ignition Source
This product is NOT approved for use in
hazardous/flammable areas, e.g.
engine rooms.
Marine's instructions provided. Failure
operated in accordance with Green
This equiptment must be installed and
Product Installation
WARNING
to do so could result in poor product
performance, personal injury, and/or
damage to your boat.
2
WARNING
WARNING
Electrical Safety
Make sure you have set the boat's
power supply to OFF before you start
installing this product.
Navigation Aid
When this product is used within a
navigation system, it is only an AID to
navigation. The accuracy of this product
can be affected by many factors,
including equipment failure or defects,
environmental conditions, and improper
use. It is the user's responsibility to
exercise common prudence and
navigational judgements. Always check
your position against all available aids to
navigation for the safety of your boat
and crew.
3
IMPORTANT INFORMATION
EMC conformance
All Green Marine monitors and accessories are designed to the best industry standards
for use in the marine environment. The design and manufacture of Green Marine
monitors and accessories conform to the appropriate ElectroMagnetic Compatibility
(EMC) standards, but correct installation is required to ensure that performance is not
compromised.
Waste Electrical and Electronic Equipment Directive
The Waste Electrical and Electronic Equipment (WEEE) Directive requires the recycling
of waste electrical and electronic equipment. While the WEEE Directive does not apply
to some of Green Marine's products, we support its policy and ask you to be aware of how
to dispose of our products.
The crossed out garbage bin symbol, illustrated above, and found on our products
signifies that this product should not be disposed of in general waste or landfill facilities.
Please contact the marine electronics dealer you purchased this product from,
or Green Marine customer support for information on product disposal.
Restriction of the use of certain Hazardous Substances
Green Marine monitors use components that comply with the requirements of the
restriction of the use of certain Hazardous Substances (RoHS) Directive 2002/95/ EC.
Warranty
To register your new Green Marine monitor, please go to:
It is important that you complete the owner information to receive full warranty
benefits, including notification of software updates if they are required.
www.greenmarinemonitors.com
4
Packing List
Before installation, please ensure the following items have been shipped:
z1 x Green Marine AWM Series Marine Display
z4 x Mounting bracket lugs and 4 stainless steel threaded studs
z1 x Power Cable 15.5ft (472 cm)
z1 x VGA Cable 9ft (274 cm)
z1 x Printed Flush Mount Template
z1 x Printed User Manual
If any of these items should be missing or damaged, please contact your dealer
or sales representative immediately.
摡浡来搠灬敡獥潮瑡捴⁹潵爠摥慬敲摡浡来搠灬敡獥潮瑡捴⁹潵爠摥慬敲
5
1.0 INTRODUCTION
About Green Marine AWM Series Monitors
Green Marine AWM Series Marine Monitors are equipped with optically bonded
AR glass and are specifically engineered to survive the most demanding applications.
You will soon become familiar with the quality difference in this bright, sunlight
readable (0 to 1,000 nits) monitor.
The range of AWM Series Marine Monitors has been developed to be used as part
of an integrated marine navigation system or within an entertainment system.
The monitors, available in several sizes, are suitable for use on the flybridge or in
the pilot house and are IP-65 waterproof when panel mounted.
The AWM Series Marine Monitors handle a wide-range of extreme environments
making them the industry choice for recreational and commercial marine applications.
Housed in a milled billet aluminum case,the AWM Monitors are light weight and are
designed with a very slim case profile. Front-mounted controls and a dimming knob insure
these monitors are user-friendly. We have incorp orated the latest optical engineering to
achieve optimal viewability in all lighting conditions, including direct sunlight. The
AWM Series' power efficient, low heat design results in increased reliability and
longevity required for mission critical deployment.
This manual contains important information on the installation, operation and
maintenance of your Green Marine AWM Series Marine Monitor(s).
6
2.0 CONTROL AND FEATURES
Your AWM Series Marine Monitor has the following controls and features:
Front View
Remarks: The PIP function is only available for AWM-1900 and AWM-1700 models.
Back View
Remarks: Only DVIx1 and VGAx1 for AWM-1500 and AWM-1200 models.
PIP
Display Screen
OSD Control
Buttons
Power
Button
VR
Knob
FUSE
10A Max
9-36V
DC DVI VGA CVBS RS232
7
3.0 INSTALLATION
It is important that your new monitor is installed and operated in accordance with the
instructions provided in this manual. Failure to do so could result in poor product
performance and may invalidate your warranty.
When planning the installation the following points must be considered:
• Your AWM monitor is sunlight viewable and visible in direct sunlight..
• If temperatures exceed the normal temperature operating range, the display could
overheat and begin to blackout due to the limitations of TFT LCD technology.
• In order to minimize the chances of a malfunction, the following precautions should be
taken during installation:
• The monitor should be installed in an area where there is proper and adequate
ventilation (min. 6 inches / 15cm clearance) . If it is possible to cool the area behind
the monitor, it will significantly reduce the risk of a malfunction.
• The monitor should be mounted at an angle to the sun. We do not recommend
mounting the unit in a flat plane, which increases the surface area exposed to the
sun and leads to increased heat absorption.
IMPORTANT: Your AWM Series Monitor is only waterproof from the front. To maintain
watertight integrity, the monitor must be flush mounted ensuring that the rear casing
is enclosed in a watertight enclosure.
The AWM Series Marine Monitor is designed to be mounted in two configurations:
VESA75 / VESA100 MOUNT
The Green Marine AWM Series Marine Monitors are compatible with VESA75 and VESA100
mounts. By installing the monitor with a compatable VESA mount the user can change
the monitors angle to improve viewability. Before the display is mounted, power and signal source
should be connected and monitor should be held at approximate mounting location to check viewing
angle for satisfactory picture quality.
8
This manual suits for next models
3
Table of contents
