Greenlee 624 Operating instructions

OPERATING, SAFETY AND SERVICE

INSTRUCTION MANUAL

For additional copies at no charge order 999 8117.3

624

WIRE GRIP

Read and undesestand this material before operating

or servicing this tool. Failure to understand how to

safely operate could result in an accident causing seri-

ous injury or death. This tool should only be operated

by qualied personnel.

999 8117.3 © 2019 Greenlee Tools, Inc. IM-984 REV 2 10/19

CABLE PREPARATION INSTRUCTIONS:

Strip approximately three inches of insulation off the

ends of the cables to be pulled.

The cable may be reduced in diameter as follows:

1. The central core should be clipped away and the

outer strands used in the grip head.

2. Using the Allen Wrench provided, back out

the set screws far enough to accomodate the

stripped cables.

3. Insert the bare wire strands into the grip head as

far as they will go.

4. Tighten both set screws in each grip jaw securely

against the conductors.

5. CAUTION: If the set screws extend above the

surface of the gripping head, damage to the

conduit could result. To prevent this, wrap the

head with electrical tape.

The Greenlee No. 624 Wire Grip is designed with four

gripping jaws to pull one or more conductors of either

copper or aluminum in 2” or larger size conduit.

The 624 Greenlee Wire Grip contains the following:

• One Each No. 624 Wire Grip

• One Each 905 1208.1 Allen Wrench

• Two Each 905 1352.0 Extra Set Screws

IMPORTANT: To avoid a pulling hazard, use the

following maximum load ratings.

• 1750 pounds maximum when a single wire grip

collar is used.

• 3250 pounds maximum on a wire grip pair, 624S

or 624L.

• 6500 pounds maximum both grip pairs.

NOTE: The grip head should not be more than 60%

lled nor less than 40% lled to assure that the set

screw does not project above the surface of the grip

body when the set screws are tightened down.

Greenlee Tools, Inc.

4455 Boeing Drive, Rockford, IL 61109-2988 USA

800/435-0786, in Illinois call 815/397-7070

Fax: 815/397-1865

Service: 800/435-2932, Canada: 800/233-5924

Table of contents

Other Greenlee Power Tools manuals

Greenlee

Greenlee GATOR CK06AT User manual

Greenlee

Greenlee K09-2GL User manual

Greenlee

Greenlee GATOR PRO E12CCX User manual

Greenlee

Greenlee GATOR CK12ID User manual

Greenlee

Greenlee Intelli-PUNCH User manual

Greenlee

Greenlee F09 User manual

Greenlee

Greenlee GATOR EK1230L User manual

Greenlee

Greenlee GATOR CLS60GL User manual

Greenlee

Greenlee LPK1240 User manual

Greenlee

Greenlee ES32ML User manual

Greenlee

Greenlee GREENLEE KWIK-STRIPPER 45019 User manual

Greenlee

Greenlee P2096 User manual

Greenlee

Greenlee GATOR EK425L User manual

Greenlee

Greenlee GRE 6 User manual

Greenlee

Greenlee Fairmont F20 User manual

Greenlee

Greenlee GATOR EK410L User manual

Greenlee

Greenlee Tugger 640 Guide

Greenlee

Greenlee HK06FT User manual

Greenlee

Greenlee Tugger 640 User manual

Greenlee

Greenlee CTR200 User manual

Greenlee

Greenlee GATOR LS50L2 User manual

Greenlee

Greenlee 1981 User manual

Greenlee

Greenlee GATOR LS100L User manual

Greenlee

Greenlee K09-2SPGL User manual

Popular Power Tools manuals by other brands

AEG

AEG OMNI-JS Original instructions

SIP

SIP 01533 manual

Ribimex

Ribimex PRS499 quick start guide

3M

3M Fiber Optic Connector Crimp Tool instructions

Ryobi

Ryobi P524 Operator's manual

ROJEK

ROJEK FSN 300A manual

Kemper

Kemper 1740PRO manual

WABCO

WABCO OptiTire installation manual

EINHELL

EINHELL TE-MS 18/210 Li Original operating instructions

Orgapack

Orgapack OR-T 85 Operating and safety instructions

TOUGHCUT

TOUGHCUT Diamond 400 instruction manual

Yaros

Yaros PB-3603 user manual

Fein

Fein BSS 2.0 E Repair instructions

Baileigh Industrial

Baileigh Industrial SS-2725 Operator's manual

Milwaukee

Milwaukee 2674-20 Operator's manual

Fein

Fein BLs 1.6 parts list

Princess

Princess Electric Multi Sharpener user manual

FOREDOM

FOREDOM K.1050 Operation & maintenance manual