Greenheck ESD-635D User manual

ESD-635D Flange/Sleeve Installation with Damper 1

Installation, Operation and Maintenance Manual

Please read and save these instructions for future reference. Read carefully before attempting to assemble, install,

operate or maintain the product described. Protect yourself and others by observing all safety information. Failure

to comply with these instructions will result in voiding of the product warranty and may result in personal injury

and/or property damage.

Document 474638

ESD-635D

Flange/Sleeve Installation

with VCD-40 Damper

Florida Product Approval No: FL10088

Miami-Dade NOA No.: 17-0919.04

Maximum Wind-load: 150 PSF

ESD-635D Flange/Sleeve Installation with Damper2

Florida Product Approval No: FL10088

Miami-Dade NOA No.: 17-0919.04

Maximum Wind-load: 150 PSF

Maximum Size and Installation Information

Model ESD-635D with VCD-40 is a Miami-Dade Qualified and Florida Product Approved louver and must be installed

in accordance with the installation instructions shown herein. Model ESD-635D with VCD-40 is qualified for installation

within concrete/masonry, steel stud, structural steel or wood framed building conditions. Model ESD-635D with VCD-40 is

structurally calculated to withstand positive and negative wind-loads up to 150 PSF. The maximum single section rough

opening width is 36.50 in. The maximum single section rough opening height is 144.50 in. While the maximum rough opening

height is limited to 144.50 in., the rough opening width is limited to 1,000 in. as multiple sections may be installed side by

side in accordance with installation instructions.

Minimum Rough

Opening Size

12 in. W x 15.25 in. H

Maximum Single Section

Rough Opening Size

36.50 in. W x 144.50 in. H

Building Condition/Substrate Limitations

• All wood substrate shall be G= 0.55 density or better

• All metal stud substrate should be min. 16 Ga. FY= 50 KSI

• All structural steel substrate shall be min. 0.25 in. thick FY= 36 KSI

• All concrete substrate shall be min. 3000 PSI

• Concrete masonry shall be ASTM C90, Type II, 2000 PSI, grout-filled

ESD-635D Flange/Sleeve Installation with Damper 3

Florida Product Approval No: FL10088

Miami-Dade NOA No.: 17-0919.04

Maximum Wind-load: 150 PSF

Single Section

ESD-635D Flange/Sleeve Installation with Damper4

Florida Product Approval No: FL10088

Miami-Dade NOA No.: 17-0919.04

Maximum Wind-load: 150 PSF

Multiple Sections

Height ≤ 96 ½

ESD-635D Flange/Sleeve Installation with Damper 5

Florida Product Approval No: FL10088

Miami-Dade NOA No.: 17-0919.04

Maximum Wind-load: 150 PSF

Multiple Sections

Height > 96 ½ ≤ 144 ½

ESD-635D Flange/Sleeve Installation with Damper6

Florida Product Approval No: FL10088

Miami-Dade NOA No.: 17-0919.04

Maximum Wind-load: 150 PSF

Single Section

Structure Depth

• Min. structure depth 4 in.

• Max. structure depth 14.5 in.

ESD-635D Flange/Sleeve Installation with Damper 7

Florida Product Approval No: FL10088

Miami-Dade NOA No.: 17-0919.04

Maximum Wind-load: 150 PSF

Multiple Sections

Height ≤ 96 ½

Structure Depth

• Min. structure depth 4 in.

• Max. structure depth 11.5 in.

As a result of our commitment to continuous improvement, Greenheck reserves the right to change speciﬁcations

without notice.

Product warranties can be found online at Greenheck.com, either on the speciﬁc product page or in the literature

section of the website at Greenheck.com/Resources/Library/Literature.

Phone: 715.359.6171 • Fax: 715.355.2399 • Parts: 800.355.5354 • E-mail: [email protected] • Website: www.greenheck.com

Our Commitment

Florida Product Approval No: FL10088

Miami-Dade NOA No.: 17-0919.04

Maximum Wind-load: 150 PSF

Multiple Sections

Height > 96 ½ ≤ 144 ½

Structure Depth

• Min. structure depth 4 in.

• Max. structure depth 13.25 in.

Table of contents

Other Greenheck Fan manuals

Greenheck

Greenheck SQ User manual

Greenheck

Greenheck SP-AP0511WL User manual

Greenheck

Greenheck CRD-501 Manual

Greenheck

Greenheck DC User manual

Greenheck

Greenheck DFD-M150 User manual

Greenheck

Greenheck VersiVent VER-45 User manual

Greenheck

Greenheck APEX Series User manual

Greenheck

Greenheck VFCD User manual

Greenheck

Greenheck BIDW User manual

Greenheck

Greenheck SQ Series User manual

Greenheck

Greenheck FSD-312 User manual

Greenheck

Greenheck FDR-510 User manual

Greenheck

Greenheck USF User manual

Greenheck

Greenheck Series L User manual

Greenheck

Greenheck ERVe-20 Instruction manual

Greenheck

Greenheck LFC User manual

Greenheck

Greenheck IGX-HV User manual

Greenheck

Greenheck RV User manual

Greenheck

Greenheck H-G Series User manual

Greenheck

Greenheck SQ Series User manual

Greenheck

Greenheck SBCE User manual

Greenheck

Greenheck MiniCore 5 User manual

Greenheck

Greenheck AMPLIFY DM User manual

Greenheck

Greenheck SE1 User manual

Popular Fan manuals by other brands

ELTA FANS

ELTA FANS H03VV-F installation guide

Hunter

Hunter 20714 Owner's guide and installation manual

Emerson

Emerson CARRERA VERANDA CF542ORB00 owner's manual

Hunter

Hunter Caraway Owner's guide and installation manual

Panasonic

Panasonic FV-15NLFS1 Service manual

Kompernass

Kompernass KH 1150 operating instructions

VES

VES FALA100/12V/TR Original instructions

Vertiv

Vertiv Liebert DCD user manual

Westinghouse

Westinghouse GFP Series owner's manual

Venmar

Venmar KUBIX HRV PLUS Series user guide

Maico

Maico ECR 31 installation instructions

Sonnenkonig

Sonnenkonig Dinky instruction manual

S&P

S&P ECOWATT HXBR manual

Wider

Wider IMP03369BH instruction manual

Panasonic

Panasonic F-60DHN Operating and installation instructions

Hinkley

Hinkley HIGHLAND instruction manual

Broan

Broan 766BN installation guide

Premium

Premium PFS16022 Use manual