Graco EP2 User manual

Pump Assembly Instructions

EP2 Hose Pump Assembly 406953B

EN

To assemble the roller kit to an EP2 Hose Pump.

For professional use only.

NOTE: Parts included in the kit are marked with an asterisk (*).

See your EP2 Hose Pump Repair Manual for a complete list of

Kit Part Numbers.

1. Remove the cover (12) and gasket (11).

2. Pull the hose out of the bottom of the housing (103) at the

6 o’clock position.

3. Move the eccentric shaft (7) to the 6 o’clock position.

4. Lubricate the eccentric shaft (7) with hose lube. Install

the roller (102*) and the roller retaining ring (8*).

5. Turn the motor fan to move the roller (102) to the 12

o’clock position. Push the hose (103) into the housing.

Use a rubber mallet if the hose is difficult to seat.

Continued.

TI18220a

12

11

1

Lubricate with hose lube.

1

TI18221a

7

8*

102*

TI18224a

102

103

Important Safety Instructions

Before beginning, read all warnings and instructions in this manual

and in your related equipment manuals. Save all instructions. This

manual is only a guide for kit installation. See your EP2 Hose Pump

manual for complete warnings and repair instructions.

All written and visual data contained in this document reflects the latest product information available at the time of publication.

Graco reserves the right to make changes at any time without notice.

Original instructions. This manual contains English. MM 406953

Graco Headquarters: Minneapolis

International Offices: Belgium, China, Japan, Korea

GRACO INC. AND SUBSIDIARIES • P.O. BOX 1441 • MINNEAPOLIS, MN 55440-1441 • USA

Copyright 2011, Graco Inc. All Graco manufacturing locations are registered to ISO 9001.

www.graco.com

Revised June 2012

6. Return the roller (102) to the 6 o’clock position, com-

pressing the hose. It is critical that the roller is at the bot-

tom of the pump to ensure the correct capacity of hose

lube. Reinstall the motor fan cover.

7. Install the gasket (11) and front cover (12). Install the

screws (14) and washers (13). Torque oppositely to 25

in-lb (2.8 N•m).

NOTE: Do not over-tighten the front cover screws. This will

cause the gasket to deform and the pump to leak.

8. Add hose lube as explained in your EP2 Pump Repair

Manual.

NOTICE

The roller must be returned to the 6 o’clock position before

installing the front cover. Failure to do so will result in overfill-

ing the pump with hose lube.

TI18225a

12

11

13

14

102

3

Torque oppositely to

25 in-lb (2.8 N•m).

3

Table of contents

Other Graco Water Pump manuals

Graco

Graco Dura-Flo 2400 Operation manual

Graco

Graco Wolverine Advanced Operation manual

Graco

Graco fire-ball 425 Operation manual

Graco

Graco Dura-Flo 2400 User manual

Graco

Graco Xtreme 24N976 Parts list manual

Graco

Graco Spindl-Gard SG-1 Operation manual

Graco

Graco Series B Operation manual

Graco

Graco Husky 1040 Operation manual

Graco

Graco Power-Flo Senator User manual

Graco

Graco 247888 Operation manual

Graco

Graco SaniForce 1040 Manual

Graco

Graco Dura-Flo XL 1000cc Guide

Graco

Graco Eagle C Series Operation manual

Graco

Graco President 218747 Operation manual

Graco

Graco BULLDOG HYDRA-CAT E Series Operation manual

Graco

Graco 127642 User manual

Graco

Graco HIGH-FLO 243737 User manual

Graco

Graco 25C837 Parts list manual

Graco

Graco MP-25 Instruction Manual

Graco

Graco 256273 User manual

Graco

Graco Fire-Ball 237526 Datasheet

Graco

Graco Husky 1050e Instruction Manual

Graco

Graco ChemSafe 1590 Operation manual

Graco

Graco G3 Series User manual

Popular Water Pump manuals by other brands

Neptun

Neptun NPHW 5500 operating instructions

Sensidyne

Sensidyne Gilian BDX-II Operation & service manual

Draper

Draper 47808 instructions

Trolla

Trolla 12820 manual

Sunfab

Sunfab SVH Series installation guide

WilTec

WilTec 50740 Operation manual

Fieldmann

Fieldmann FVC 5015 EK user manual

Everbilt

Everbilt EFSUB5-122HD Use and care guide

esotec

esotec 101018 operating manual

moyno

moyno 2000 CC Service manual

Becker

Becker BASIC VASF 2.80/1-0.AC230 operating instructions

Sykes AmeriPumps

Sykes AmeriPumps GP100M Operation and maintenance instructions

DUROMAX

DUROMAX XP WX Series user manual

BRINKMANN PUMPS

BRINKMANN PUMPS SBF550 operating instructions

Franklin Electric

Franklin Electric IPS Installation & operation manual

Xylem

Xylem e-1532 Series instruction manual

Milton Roy

Milton Roy PRIMEROYAL instruction manual

STA-RITE

STA-RITE ST33APP owner's manual