Graco XM Series User manual

Installation - Parts

XM Plural-Component

OEM Sprayer 313292J

For spraying two-component epoxy and urethane protective coatings

in non-hazardous locations.

For professional use only.

See page 9 for model information.

See page 27 for maximum working pressure.

For patent information, see www.graco.com/patents

Important Safety Instructions

Read all warnings and instructions in this

manual and in related manuals before using

the equipment. Save all instructions.

2313292J

Contents

Related Manuals . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Important Isocyanate (ISO) Information . . . . . . . . 7

Material Self-Ignition ......................7

Keep Components A and B Separate .........7

Moisture Sensitivity of Isocyanates ...........8

Changing Materials .......................8

Models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Usage ................................10

Location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Grounding .............................10

Component Identification . . . . . . . . . . . . . . . . . . . 11

Pressure Relief Procedure . . . . . . . . . . . . . . . . . . 16

Flush Mixed Material . . . . . . . . . . . . . . . . . . . . . . . 18

Installation and Setup . . . . . . . . . . . . . . . . . . . . . . 19

Connect Air Lines .......................19

Connect Fluid Hoses .....................19

Connect Air Hoses ...................... 19

Connect Sensor Cables .................. 19

Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Repair . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Schematics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

XMA_00 and XMB_00 Parts ...............23

XME_00 and XMF_00 Parts ...............24

XMG_00 and XMH_00 Parts ..............25

Accessories and Kits . . . . . . . . . . . . . . . . . . . . . . 26

Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Technical Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Graco Standard Warranty . . . . . . . . . . . . . . . . . . . 32

Graco Information . . . . . . . . . . . . . . . . . . . . . . . . 32

Related Manuals

313292J 3

Related Manuals

Manuals are available at www.graco.com.

Component Manuals in U.S. English:

Manual Description

312359 XM Plural-Component Sprayers

Operation

313289 XM Plural-Component Sprayers

Repair-Parts

311762 Xtreme®Displacement Pumps

Instructions-Parts

3A5423 XL6500 and XL3400 Air Motors

Instructions-Parts

312747 Double Wall Hopper Kit

Instructions-Parts

309524 Viscon®HP Heater Instructions-Parts

312145 XTR™5 and XTR™7 Spray Guns

Instructions-Parts

312769 Feed Pump and Agitator Kits

Instructions-Parts

312794 Merkur®Pump Assembly

Instructions-Parts

406699 7-Gallon Hopper Installation Kit

Instructions-Parts

406739 Desiccant Kit Instructions-Parts

313258 Electric Heated Hose Power Supply

Kit Instructions-Parts

313259 Hopper or Hose Heat Circulation Kit

Instructions-Parts

312770 Lower Strainer and Valve Kit

Instructions-Parts

312749 XM Mix Manifold Kit

Instructions-Parts

313293 Alternator Conversion Kits

Instructions-Parts

313342 Dosing Valve Repair Kit

Instructions-Parts

313343 High Flow Severe Duty Shutoff Check

Valve Repair Kit Instructions-Parts

Warnings

4313292J

Warnings

The following warnings are for the setup, use, grounding, maintenance, and repair of this equipment. The

exclamation point symbol alerts you to a general warning and the hazard symbols refer to procedure-specific risks.

When these symbols appear in the body of this manual or on warning labels, refer back to these Warnings.

Product-specific hazard symbols and warnings not covered in this section may appear throughout the body of this

manual where applicable.

WARNING

FIRE AND EXPLOSION HAZARD

Flammable fumes, such as solvent and paint fumes, in work area can ignite or explode. Paint or

solvent flowing through the equipment can cause static sparking. To help prevent fire and explosion:

• Use equipment only in well-ventilated area.

• Eliminate all ignition sources; such as pilot lights, cigarettes, portable electric lamps, and plastic

drop cloths (potential static sparking).

• Ground all equipment in the work area. See Grounding instructions.

• Never spray or flush solvent at high pressure.

• Keep work area free of debris, including solvent, rags and gasoline.

• Do not plug or unplug power cords, or turn power or light switches on or off when flammable fumes

are present.

• Use only grounded hoses.

• Hold gun firmly to side of grounded pail when triggering into pail. Do not use pail liners unless they

are anti-static or conductive.

•Stop operation immediately if static sparking occurs or you feel a shock.Do not use equipment

until you identify and correct the problem.

• Keep a working fire extinguisher in the work area.

SPECIAL CONDITIONS FOR SAFE USE

• To prevent the risk of electrostatic sparking, the equipment’s non-metallic parts must be cleaned

with only a damp cloth.

• Refer to the Viscon HP Heater manual for special conditions for safe use.

ELECTRIC SHOCK HAZARD

This equipment must be grounded. Improper grounding, setup, or usage of the system can cause

electric shock.

• Turn off and disconnect power at main switch before disconnecting any cables and before servicing

or installing equipment.

• Connect only to grounded power source.

• All electrical wiring must be done by a qualified electrician and comply with all local codes and

regulations.

Warnings

313292J 5

SKIN INJECTION HAZARD

High-pressure fluid from gun, hose leaks, or ruptured components will pierce skin. This may look like

just a cut, but it is a serious injury that can result in amputation. Get immediate surgical treatment.

• Do not spray without tip guard and trigger guard installed.

• Engage trigger lock when not spraying.

• Do not point gun at anyone or at any part of the body.

• Do not put your hand over the spray tip.

• Do not stop or deflect leaks with your hand, body, glove, or rag.

• Follow the Pressure Relief Procedure when you stop spraying and before cleaning, checking, or

servicing equipment.

• Tighten all fluid connections before operating the equipment.

• Check hoses and couplings daily. Replace worn or damaged parts immediately.

EQUIPMENT MISUSE HAZARD

Misuse can cause death or serious injury.

• Do not operate the unit when fatigued or under the influence of drugs or alcohol.

• Do not exceed the maximum working pressure or temperature rating of the lowest rated system

component. See Technical Specifications in all equipment manuals.

• Use fluids and solvents that are compatible with equipment wetted parts. See Technical

Specifications in all equipment manuals. Read fluid and solvent manufacturer’s warnings. For

complete information about your material, request Safety Data Sheets (SDSs) from distributor or

retailer.

• Do not leave the work area while equipment is energized or under pressure.

• Turn off all equipment and follow the Pressure Relief Procedure when equipment is not in use.

• Check equipment daily. Repair or replace worn or damaged parts immediately with genuine

manufacturer’s replacement parts only.

• Do not alter or modify equipment. Alterations or modifications may void agency approvals and

create safety hazards.

• Make sure all equipment is rated and approved for the environment in which you are using it.

• Use equipment only for its intended purpose. Call your distributor for information.

• Route hoses and cables away from traffic areas, sharp edges, moving parts, and hot surfaces.

• Do not kink or over bend hoses or use hoses to pull equipment.

• Keep children and animals away from work area.

• Comply with all applicable safety regulations.

TOXIC FLUID OR FUMES HAZARD

Toxic fluids or fumes can cause serious injury or death if splashed in the eyes or on skin, inhaled, or

swallowed.

• Read Safety Data Sheets (SDSs) to know the specific hazards of the fluids you are using.

• Route exhaust away from work area. If diaphragm ruptures, fluid may be exhausted into the air.

• Store hazardous fluid in approved containers, and dispose of it according to applicable guidelines.

WARNING

Warnings

6313292J

BURN HAZARD

Equipment surfaces and fluid that is heated can become very hot during operation. To avoid severe

burns:

• Do not touch hot fluid or equipment.

MOVING PARTS HAZARD

Moving parts can pinch, cut or amputate fingers and other body parts.

• Keep clear of moving parts.

• Do not operate equipment with protective guards or covers removed.

• Equipment can start without warning. Before checking, moving, or servicing equipment, follow the

Pressure Relief Procedure and disconnect all power sources.

PERSONAL PROTECTIVE EQUIPMENT

Always wear appropriate personal protective equipment and cover all skin when spraying, servicing

equipment, or when in the work area. Protective equipment helps prevent serious injury, including

long-term exposure; inhalation of toxic fumes, mists or vapors; allergic reaction; burns; eye injury and

hearing loss. This protective equipment includes but is not limited to:

• A properly fitting respirator, which may include a supplied-air respirator, chemically impermeable

gloves, protective clothing and foot coverings as recommended by the fluid manufacturer and local

regulatory authority.

• Protective eyewear and hearing protection.

WARNING

Important Isocyanate (ISO) Information

313292J 7

Important Isocyanate (ISO) Information

Isocyanates (ISO) are catalysts used in two component materials.

Isocyanate Conditions Material Self-Ignition

Keep Components A and B

Separate

Spraying or dispensing fluids that contain isocyanates

creates potentially harmful mists, vapors, and

atomized particulates.

• Read and understand the fluid manufacturer’s

warnings and Safety Data Sheets (SDSs) to know

specific hazards and precautions related to

isocyanates.

• Use of isocyanates involves potentially hazardous

procedures. Do not spray with this equipment

unless you are trained, qualified, and have read

and understood the information in this manual and

in the fluid manufacturer’s application instructions

and SDSs.

• Use of incorrectly maintained or mis-adjusted

equipment may result in improperly cured

material. Equipment must be carefully maintained

and adjusted according to instructions in the

manual.

• To prevent inhalation of isocyanate mists, vapors,

and atomized particulates, everyone in the work

area must wear appropriate respiratory protection.

Always wear a properly fitting respirator, which

may include a supplied-air respirator. Ventilate the

work area according to instructions in the fluid

manufacturer’s SDSs.

• Avoid all skin contact with isocyanates. Everyone

in the work area must wear chemically

impermeable gloves, protective clothing and foot

coverings as recommended by the fluid

manufacturer and local regulatory authority.

Follow all fluid manufacturer recommendations,

including those regarding handling of

contaminated clothing. After spraying, wash

hands and face before eating or drinking.

Some materials may become self-igniting if applied

too thick. Read material manufacturer’s warnings and

Safety Data Sheets (SDSs).

Cross-contamination can result in cured material in

fluid lines which could cause serious injury or damage

equipment. To prevent cross-contamination:

•Never interchange component A and component

B wetted parts.

• Never use solvent on one side if it has been

contaminated from the other side.

Important Isocyanate (ISO) Information

8313292J

Moisture Sensitivity of

Isocyanates

Exposure to moisture (such as humidity) will cause ISO

to partially cure, forming small, hard, abrasive crystal

that become suspended in the fluid. Eventually a film will

form on the surface and the ISO will begin to gel,

increasing in viscosity.

NOTE: The amount of film formation and rate of

crystallization varies depending on the blend of ISO, the

humidity, and the temperature.

Changing Materials

NOTICE

Partially cured ISO will reduce performance and the life

of all wetted parts.

• Always use a sealed container with a desiccant

dryer in the vent, or a nitrogen atmosphere. Never

store ISO in an open container.

• Keep the ISO pump wet cup or reservoir (if

installed) filled with appropriate lubricant. The

lubricant creates a barrier between the ISO and the

atmosphere.

• Use only moisture-proof hoses compatible with

ISO.

• Never use reclaimed solvents, which may contain

moisture. Always keep solvent containers closed

when not in use.

• Always lubricate threaded parts with an appropriate

lubricant when reassembling.

NOTICE

Changing the material types used in your equipment

requires special attention to avoid equipment damage

and downtime.

• When changing materials, flush the equipment

multiple times to ensure it is thoroughly clean.

• Always clean the fluid inlet strainers after flushing.

• Check with your material manufacturer for

chemical compatibility.

• When changing between epoxies and urethanes or

polyureas, disassemble and clean all fluid

components and change hoses. Epoxies often

have amines on the B (hardener) side. Polyureas

often have amines on the B (resin) side.

Models

313292J 9

Models

Use the following matrix to define the construction of the sprayer, based on the six digits. For example, Part XMEA00

represents an XM Plural-Component OEM sprayer (XM); 5200 psi pump set with pump filters (E); wall power supply

that is not approved for hazardous areas (A).

NOTE: To order replacement parts, see Parts section the XM Plural-Component Sprayer Repair-Parts manual

313289. The digits in the matrix do not correspond to the Ref. Nos. in the Parts drawings and lists.

NOTE: See Accessories and Kits, page 26, for a list of

available accessories and kits.

XM OEM sprayers are not approved for use in

hazardous locations.

XM E A 00

First and Second

Digits

Third Digit Fourth Digit

Fifth and Sixth

Digits

System Choice

(See Table 1 for lower models) Control Box Choice

Pump Set

(hose/gun) Pump Filters

Remote

Manifold Control Box Always 00

(OEM plural

component sprayer

without a frame)

Ano pumps AWall Power Supply

Bno pumps ✔DAlternator

E5200 psi ✔

F5200 psi

G6300 psi ✔

H6300 psi

Code

System Pressure

(MPa, bar)

Pump

Filters

A Lower

(see manual 311762)

B Lower

(see manual 311762)

E5200 psi (35, 350) ✔L250C4 L220C4

F5200 psi (35, 350) L250C3 L220C3

G6300 psi (49, 490) ✔L180C4 L145C4

H6300 psi (49, 490) L180C3 L145C3

Table 1: : Lower Models and Corresponding Identification Codes

Overview

10 313292J

Overview

Usage

XM plural-component sprayers can mix and spray most

two-component epoxy and urethane protective coatings.

When using quick-setting materials (less than 10 minute

pot life) a remote mix manifold must be used.

XM plural-component sprayers are operated via user

interface, air controls, and fluid controls.

Location

Grounding

Ground control box (ground wire attached) and both air

motors to a true earth ground.

NOTE: If wall power is used, ground electrical

connection properly according to local codes.

XM OEM sprayers are not approved for use in

hazardous locations.

Ground Wire

Control Box

Ground Nut

WLD

Control Box

Ground Wire

Other manuals for XM Series

Table of contents

Other Graco Paint Sprayer manuals

Graco

Graco 240539 User manual

Graco

Graco Triton 308 Operation manual

Graco

Graco 237-425 Operation manual

Graco

Graco TrueCoat Plus II 24N812 User manual

Graco

Graco 231-316 Series C User manual

Graco

Graco 3A4803A Guide

Graco

Graco GM 3500 Operation manual

Graco

Graco PRO AA5500SC User manual

Graco

Graco 249258 Parts list manual

Graco

Graco 965022 User manual

Graco

Graco Contractor King 279005 User manual

Graco

Graco dutymax gh 300 Operating instructions

Graco

Graco RentalPro 360G 255667 Operating instructions

Graco

Graco Mark IV 249636 Use and care manual

Graco

Graco SG2 User manual

Graco

Graco 232164 Operation manual

Graco

Graco 236685 Datasheet

Graco

Graco 249318 Assembly instructions

Graco

Graco HVLP EDGE 24Y630 Instruction Manual

Graco

Graco WB100 Operation manual

Graco

Graco LineLazer IV Series User manual

Graco

Graco ULTRA MAX 695 User manual

Graco

Graco 17C810 Use and care manual

Graco

Graco Spray Station User manual

Popular Paint Sprayer manuals by other brands

SNOWJOE

SNOWJOE Sunjoe 24V-GS-LTW-RM Operator's manual

Binks

Binks SV100 Service manual

Fimco

Fimco LG-4-3-1 owner's manual

AG SPRAY

AG SPRAY FS-ATV-25BL owner's manual

Nordson

Nordson MicroMax 2 manual

Bonide

Bonide 051 Operation and service instructions

zogics

zogics Z-DAS instruction manual

KISANKRAFT

KISANKRAFT KK-KBS-165 Operation manual

Matrix

Matrix SG 650 Translation of the original instructions

Anest Iwata

Anest Iwata SGA-3 Installation, use & maintenance instruction manual

paasche

paasche VV Instructions and parts list

Carlisle

Carlisle DeVilbiss JGA-510 Service manual

Gardena

Gardena 11120 Operator's manual

Conrad

Conrad Hobby Airbrush K3 operating instructions

wiwa

wiwa 14025 R/F operating manual

DeVilbiss

DeVilbiss LUNA2i Operation manual

WAGNER

WAGNER W 125 manual

My Clean Buddy

My Clean Buddy PW018 user manual