GoPowerBike GoExpress User manual
EXPRESS
MANUAL
Page 1 of 14
Cheers on your new GoPowerBike. The Bike is an innovative and fun
personal transportation device, ready to take on everyday use. Before
you ride, check whether any parts of the bike are loose or if the wheels
are damaged. If there are any issues or problems, please contact
GoPowerBike Customer Support at (212) 719-5500 ext:104, or email
us at [email protected] immediately.
This manual can help you understand how to operate, maintain and
use your GoPowerBike. In order to avoid danger, please use caution
and learn how to ride this bike. GoPowerBike are not to be held liable
for injury or damage caused from riding the GoPowerBike 24” Bike to
Go . Falling, losing control, and collisions (including failure to comply
with the manual) may cause serious injury. Bike owners ride at their
own risk.
The user is responsible for consequences caused by improper use of
bike.
If for any reason you want to return this product, please email us at
[email protected] or call us at (212) 719-5500 ext:104.
Welcome to Your New Means Of Transportation
Page 2 of 14
pg. 4
Bike Specs
Assembling the Wheels pg. 5
Assembling the Stem
Assembling the Handlebar
Attaching the Seat
pg. 6
pg.6
Attaching the Pedals
Adjusting the brakes
Battery
Charger/Charging the Bike
Battery Maintenance
LCD Monitor
Headlight/Back-light
pg.7
pg.8
pg.9
pg.10
Warranty
pg.11
pg.12
pg.12
pg.12
pg.14
Table of Contents:
Assembling the Bike:
Page 3 of 14
Display: LCD 36V 5 Level PAS
Hub Motor: 36v 500w
Lights:Front Headlight
Pedal Assist: 5 Level
Throttle: Half Twist with On/Off Button
Max Speed: 20 MPH
Charge Time: 3-4 Hours
Range: 20 Miles
Brake Levers: Comfort Grip Levers with Throttle
Cutoff Brakes: F/R disc brake
Cassette: 7 Speed Shimano Mega-range
Freewheel Chain: Wheel 48Y 175MM
Dérailleur: Shimano 7 Speed Tourney
Fenders: Optional
Front and Rear Fork: Suspension
Frame: Aluminum Alloy
Kickstand: Aluminum (Heavy Duty) with plastic
foot
Pedals: Wellgo Folding Pedals with reflectors
Racks: Rear Rack, load up to 25lbs
Rims: 20*4.0 inch Double Wall
Saddle: Velo Saddle
Shift Lever: Shimano 7-Speed
Spokes: Stainless Steel and Nipples (Chrome or
Black)
Stem: Aluminum Alloy Tires: 20" * 4.0"
Max Load: 260 lbs
Frame Size: 17"
Frame Type: Folding Frame
Bike Specs:
3 of 12
Page 4 of 14
Assembly Instructions
The steps below are a general manual to assemble
your GoPowerBike and is anything but an extensive guide
to assembling your bike. For professional assembly,
maintenance, or help, please visit a bike shop.
Assembly Steps
Step 1: Remove bike from carton and carefully set out all contents of the box.
Step 2: Unfold the frame and secure the center locking tab.
Step 3: Rotate the handlebar stem upwards and clamp the folding stem
(make sure the folding stem is securely fastened).
Step 4: Assemble the front wheel onto the front fork.
Step 5: Make sure the front wheel is aligned with the quick release axle and
disc brake.
Step 6: Install the pedals. Use the pedal marked with an “R” on the Right side
and the Left pedal marked with an “L” on the right side of the bike. Step 7:
Install the rear rack. (If you have the rear rack)
Step 8: Inflate tires to desired PSI. We advise that you inflate tires to 20 PSI.
Step 9: Adjust the stem up and down to a comfortable height and secure all
hardware in the stem assembly.
Page 5 of 14
ASSEMBLY:
To Attach The Wheel: Align the wheel into the
center of the fork, and make sure that the center of
the wheel is aligned with the frame of the bike.
Tighten into place by securing the buckle, as seen
in the picture below.
Attaching the Bike Stem:
To Attach a Stem: Insert the stem into the front fork of the
frame. Make sure that the stem is facing the proper direction and
aligned with frame of bike. Then tighten the stem once the stem
is in proper alignment with bike frame. See picture below for
what your bike stem should look like after installation.
Page 6 of 14
5
ASSEMBLING THE HANDLEBAR
The Handlebar comes folded. Lock the stem
into place using the lock levers.
Ensure that all screws on handlebar are
securely tightened and in the correct
position. You can find the screws to the
handlebar behind the LCD monitor on the
handlebar of the bike.
Open the release handle found on
the frame of the bike. Then insert
the seat tube into the frame. (as
seen in the picture to the left)
Adjust the saddle to find the right
height for riding your GoPowerBike.
If the safety line on the seat tube is
visible (as seen in the picture to the
left), then lower the seat until the
safety line is NOT visible. Once the
safety line is NOT visible, then lock
your seat into the desired height
and make sure the seat is fastened
and secured properly.
Seat Assembly
Page 7 of 14
ATTACHING THE PEDALS
To attach the pedals, you will need a wrench.
The two pedals will be labeled with R (for Right) and
L (for Left).
Once you have determined the Right and Left peddles, now twist
the pedals toward the front of the bike until they are securely
fastened. Please see picture below for how the pedals should
look after securely fastened.
Page 8 of 14
7
ADJUSTING THE BRAKES
If you feel that your brakes are too tight, turn
the silver knob clockwise (clockwise is to the
right) and now try to see how the braking of
the bike wheel feels. Turning the silver disc
clockwise will loosen the brakes, as where
turning the silver knob counter-clockwise will
tighten the brakes.
If the knob is as tight as you can make it and
the brakes are still rubbing and making
squeaky noises, then try to adjust the pad
inside the brakes (please note that brakes
may make squeaky noises until the bike has
been used for 50-60 miles). You can find the
inside pad of the brakes by looking inside of
the brake caliper (silver disc about the size
of a quarter). Use an Allen/Hex key to adjust
the disc.
If the brakes still don't feel secure,
tighten the silver knobs on the
handlebars by the hand brakes.
This will tighten the brakes.
Page 9 of 14
To take out the battery, turn the key
clockwise to unlock the battery pack. Lift the
battery pack up to remove it.
When you put the battery back on the bike
frame, put the bottom right of the battery in
place first, then align the top of the battery so
that the battery is fully secure and connected.
Then lock the battery. To lock the battery just
turn the key into the locking position.
The indicator on the battery tells you how
much battery power is left.
Green= Battery is full/ fully charged
Orange= Battery is about half full
Red= Battery has approximately 20% power
left.
BATTERY
NOTE: DO NOT LEAVE THE BATTERY CHARGING
OVERNIGHT!
Page 10 of 14
Other manuals for GoExpress
2
Table of contents
Other GoPowerBike Bicycle manuals
