Goclever CINEO COMPACT User manual
QUICK START GUIDE
INSTRUKCJA OBSŁUGI
CINEO COMPACT
Quick Start Guide
1
English | GB
Polish | PL
Bulgarian | BG
Czech | CZ
Hungarian | HU
Italian | IT
Lithuanian | LT
Portuguese | PT
Slovak | SK
German | DE
Russian | RU
Greek | GR
Service center list
4
9
15
20
25
30
35
40
45
50
55
60
65
2
2
Quick Start Guide
Scheme A
Scheme B
Quick Start Guide
3
Scheme C
Quick Start Guide - GB
4
Quick Start Guide - GB
BRAND NAME: CINEO COMPACT
MODEL NUMBER : GCPCCOM
Device (scheme A)
1. Lens cover/power switch
2. Lens
3. IR
4. O-key button
5. USB input
6. SD card slot
7. Ventilation hole
8. Speaker
9. Headphone
10. AV input
11. HDMI input
12. Focus adjuster
13. Charging microUSB
14. Charging DC
Installation
You can use a portable projector in many situations, you just
need to put it on at, stable surface in a suitable distance
from the screen. Make sure that the projector stands in axis
of symmetry to the screen (scheme B). It will ensure the best
quality of the picture and optimal shape adjustment.
Contact a professional installer to mount this project to a ce-
iling. For the best adjustment, follow the instructions pictured
in Scheme B and C.
Please refer to the following table to adjust your picture size
and distance (from the lens to screen)
5
Remote control (Scheme C)
1. Mute
2. Menu
3. Left
4. Image mode
5. Play/pause
6. Previous
7. Fast rewind
8. Up
9. Inactive button
10. Input
11. OK/conrm
12. Right
13. Down
14. Turn
15. Exit
Quick Start Guide - GB
Turn on the projector
1 .Before using the remote control, x battery in it (type
CR2025)
2.Ensure that the battery in the device is charged enough.
3. Push thelens cover to switch the power.
4. After a few seconds , the projector begins to work. The
indicator light will be white.
5. If using for the rst time, the image may appear blurry
or distorted.
If the image is blurry, adjust it with a focus adjuster. When
the whole image is as clear as the middle area of it, it will
be the best position of the lens.
6. You may also re-setup the system parameters anytime
and use dierent ports after selecting “Menu”.
Turn o the projector
1. When the projector is on, push the cover of the lens back.
The indicator should stop its light.
16. Volume +
17. Next
18. Volume -
19. Fast forward
20. Turn o
Quick Start Guide - GB
6
Troubleshooting
Quick Start Guide - GB
7
Warnings and safety precautions
1. You should clean the lens whenever you notice any dirt or
smudges. Unplug the power cable before cleaning the lens.
We recommend only using a soft cloth to clean it.
2. In order to get the best results, clean the lter at least
once a month. If the projector is used in a dirty environ-
ment, we recommend to repeat the routine more often. In
case of neglecting maintenance actions, the device can be
prone to permanent damage of image display module and
the producer does not take any responsibility for that. Cle-
aning the lter should only be done with a use of compres-
sed air in a direction opposite to its slot.
3. Never use any abrasive pad, alkaline/acid cleaner or vola-
tile solvent such as alcohol, benzene. 4. Only use standard
accessories, otherwise the device can get damaged.
5. Do not place the device on a wet or damp surface or aro-
und any containers with water.
6. Place the projector on a stable surface.
7. Before plug in the power to charge the device, please
make sure the voltage of your charger matches this pro-
jector (5V 2A).
8. Only use standard adaptors and power banks to charge
the battery.
9. Before charging the battery, make sure the device is not
on. The indicator light during charging should be red.
10. When there is thunder or when not using the projector
for a long period of time , unplug the power cable.
11.Due to high voltage, do not open or try to repair the
projector by yourself. Refer to a professional technician if
repair is needed.
12. You should not place the projector around any heat so-
urces. It can shorten its life expectancy. Optimal working
temperature of the projector is 0 ~ +40°C.
13. The total voltage of the connected devices shall not be
over 500mA,the problems caused by the wrong operation
will not be warranted.
Quick Start Guide - GB Quick Start Guide - GB
8
Correct disposal of this product
(Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other Eu-
ropean countries with separate collection systems)
This marking indicates that at the end of its working
life this product should not be disposed of with other
household waste in the EU.
To prevent possible harm to the environment or human he-
alth from uncontrolled waste disposal, please separate this
from other types of wastes and recycle it responsible to pro-
mote the sustainable reuse of material resources.
To dispose of your used device, please use the return and
collection systems available in your area or contact the re-
tailer where the product was purchased. They can take this
product for safe environmental recycling.
Quick Start Guide - PL
9
NAZWA HANDLOWA: CINEO COMPACT
NUMER PRODUKTU : GCPCCOM
Schemat urządzenia (schemat A)
1. Pokrywa obiektywu/włącznik
2. Obiektyw
3. IR (czujnik podczerwieni)
4. O-key (menu)
5. Port USB
6. Slot SDcard
7. Otwór wentylacyjny
8. Głośnik
9. Wejście na słuchawki
10. Port AV
11. Port HDMI
12. Pokrętło ostrości
13. Port zasilający microUSB
14. Port zasilający DC
Instalacja sprzętu
Przenośnego projektora można używać w wielu sytuacjach,
wystarczy umieścić go na płaskiej, stabilnej powierzchni w
odpowiedniej odległości od miejsca wyświetlania obrazu. Po-
staraj się, by projektor ustawiony był symetrycznie do osi
ekranu (schemat B). Zapewni to najlepszą jakość obrazu i
optymalne ustawienie kształtu.
Odwołaj się do poniższej tabeli, aby dopasować rozmiar ob-
razu do odległości (od obiektywu do ekranu)
Table of contents
Languages:
Other Goclever Projector manuals
